Bright Tangerine HDMI Clamp for Sony FX5 Camera

Keep a clear connection with our Sony FX5 HDMI Clamp: a low-profile but hard-clamping part of your FX5 setup. Designed to be forgotten, this Clamp will keep your cable secure, no matter the size.

No sudden twists: the Sony FX5 HDMI Clamp keeps your cable connected to your FX5 - stopping that oh-so-annoying loss-of-signal. Attach it to one of our Top Plate options, plug in your HDMI lead, and get back to shooting: the HDMI Clamp is designed to be forgotten about, so you can get back to making the unforgettable.

No More LOS
Even non-filmmakers know the pain of a cable that only works when at a certain angle: we've all lost a little bit of battery life to a dodgy charge lead at some point. The HDMI Clamp keeps that problem in the past: helping you lock your cable into place, keeping a stable connection from FX5 to external display.

Low-Profile
If you're running a stripped-back build with our FX5 Corner Top Plate, maybe with a monitor mounted in the Cold Shoe, the HDMI Clamp is ready to mount in moments. If you're using the FX5 with a more rigged-out setup on our NATO Top Plate, then the HDMI Clamp is ready just as quickly. In both cases, the Clamp sits nestled against the FX5 body for a minimal footprint: meaning you can shoot in comfort.

Clean Clamping
The FX5 HDMI Clamp has a simple yet intuitive design that is secure right up until the moment you don't want it to be. The Clamp can be adjusted to fit HDMI cable housings up to 10.9mm thick, all the way down to 5.9mm, with a few twists of a Hex Key. When it comes time to wrap, all it takes is a few twists the other way.

Part of the Sony FX5 System
The future is here: the Sony FX5 is the latest and greatest cinema camera, so make sure your camera has the cage it deserves. Bright Tangerine Sony FX5 accessories are all designed to the highest standard, so you always have the best camera rig for the job.

Compatibility
The Sony FX5 HDMI Clamp is designed to fit to the FX5 via either the Sony FX5 NATO Top Plate or the Corner Top Plate. It can accommodate HDMI cables with plug sizes between 5.9mm and 10.9mm thick.