Bretford Core L LAPTG15ESA 15-Unit Storage and Charge Cart with Rear Electrical Unit for Laptop, Gray Mist

Bretford's Core 15L Store & Charge Carts feature removable dividers that allow for vertical storage of up to 15 devices.

• Locking: Features 18 and 20 gauge steel and a re-programmable, three-dial combination padlock
• Mobile: 5" Casters allow easy transportation between classrooms or even across campuses
• Ready to Go: Core 15L Carts arrive fully assembled and ready to use
• Core L Cart has achieved GREENGUARD GOLD Certification
• Proven: UL 60950-1 Certified for Safety of Information Technology Equipment

Cabinet Assembly
Pre-Assembled Core 15L Store & Charge Carts have one 18-gauge steel work surface shelf which have one (1) 2" diameter grommet hole in rear of shelf to feed cords to electrical units. Cart also have one (1) 33-1/2"w x 21-1/2"d, 18-gauge steel bottom shelf and one (1) 33-1/2"w x 19-1/2"d middle shelf. Middle shelf includes a welded 14-gauge steel lock bracket that protrudes through the front doors and secures using a padlock. Bottom and middle shelves can be divided with up to seven (7) divider shelves that create up to eight 4-3/16"w x 15/1/2"d x 13-1/2"h computer compartments per shelf. Dividers may be removed for larger equipment. Dividers are 18-gauge steel.

Top shelf is covered with a black rubber mat so equipment does not slide and bottom and middle shelves also have black rubber mats with slots to accommodate divider shelves. Cabinet structure comes pre-assembled and consists of a pre-welded 18-gauge, 1" square tubing frame, 20-gauge pre-welded steel side panels and a 20-gauge pre-welded back panel. Two 20-gauge steel doors mount to the front of the cabinet. Rear access door is 20-gauge steel and perforated to ventilate equipment.

Back panel has one (1) 2" diameter grommet hole located at the bottom rear for cord management. Core 15L Cart has one (1) UL listed, sixteen (15) outlet electrical panel which is attached inside the upper back of the cabinet and is accessed by the back door panel. Cart has two (2) integrated push handles to easily move cart from one location to another. Each model painted in Gray Mist (GM) powder coated paint and is constructed from prime steel which contains 25% to 35% postconsumer recycled content.

Casters
Unit has four (4) 5" stem casters, two with locking brakes.

Door Lock Assembly
Front and rear doors secure using a re-programmable, four digit combination padlock.

Electrical Unit
Electrical panel on the Core 15L Cart is attached to the upper back section of the cabinet and is accessed by the rear door. Unit is UL listed, overload protected, includes a 20' power cord and has an on/off switch located on the side. The electrical unit is rated for a maximum of 12 amps to prevent nuisance tripping of the 15 amp breaker.

Construction And Environmental Testing
Carts are constructed from prime steel, which contains 25% to 35% post-consumer recycled content.

Regulatory Testing
The Pulse Series Carts have been tested and certified by Underwriter Laboratories to comply with UL 60950-1 standards for Informational Technology and Equipment. In addition to testing electrical components, certification to UL 60950-1 indicates the product conforms to all construction and stability safety testing.