Bright Tangerine Expert Kit with Top Handle Brace & 2x 12" Drumstix 15mm Support Rods for Sony FX6 Camera

Prepare your Sony FX6 for a wide range of rigging configurations. Move between setups seamlessly with flexible options for mounting accessories in seconds.

Broaden your rigging options with the Sony FX6. Setting it up on a quick-release 15mm LWS baseplate. Mount accessories to the rigid top plate with options for NATO, 1/4", 3/8" & Sony 8T points. There are also two Quick Detach (QD) sockets to attach camera straps & swivels.

Mini Axl Monitor Bracket
The Mini Axl replaces the stock monitor bracket, mounting to the articulating NATO rail for a wide range of positioning options. Adjust the angle of the screen on-the-fly with the adjustable drag or securely lock it off. It won't sag or drift from the horizontal, even when operating with the Sony FX9 Loupe.

For transport, simply fold the screen into it's stow position to keep it safe when packing away. The Top Handle brace is also included, which removes flex & transfers the weight from the handle to the top plate.

To create a level top surface, remove the top handle & mount the included Filler Piece, which can be used with dovetails & more, keeping them centered & balanced.

Each Expert kit comes with the Top Plate, Filler Piece, Top Handle Brace, Mini Axl (Sony FX6), LeftField 15mm LWS Baseplate & a set of 15mm Drumstix (12"/30.4cm)

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- Sony FX6 LeftField QR Baseplate -

Set your Sony FX6 at the correct height for 15mm LWS, speeding up transitions with the Open UP quick-release that lets you lift off the camera from the dovetail. To support accessories, add a set of 15mm rods.

This Baseplate Kit comes with the LeftField 15mm Baseplate, LeftField Dovetail Plate & Sony FX6 Riser.

The Sony FX6 LeftField Quick Release Baseplate sets the camera to the correct height for 15mm LWS. It provides 15mm rod support for accessories and allows for faster transitions between setups using the patented Open UP quick-release.

Snap On, Snap Off
The Open UP quick-release features a three-stage design which lets you securely locks the baseplate in place, slide for balance & lift off vertically. This is particularly useful for large camera builds where sliding the camera from the dovetail can be difficult.

ARRI Dovetail Compatible
The baseplate automatically calibrates to any ARRI standard dovetail, even those that our out of tolerance and is also compatible with the LeftField Dovetail Plate for smaller setups.

Interchangeable Risers
A wide range of risers are available to suit different cameras. If you own, rent or work with multiple cameras, simply swap the risers without buying a new baseplate each time.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- Sony FX6 Top Plate -

Attach the Top Plate to the Sony FX6 to provide a secure mounting point for accessories. By attaching accessories to the top plate, less weight can be placed onto the top handle while also adding quick-release functionality with the integrated NATO rails.

This Top Plate attaches to the top of the Sony FX6, wrapping around the top handle providing secure mounting points for a wide range of accessories. Integrated NATO rails run the length of the plate, with spring-loaded safety releases on both ends.

Helicoil, NATO 8T And QD
When it comes to rigging, you can choose from threaded, NATO and QD points, or any combination you need. All threaded points are stainless-steel helicoiled for added strength. Helicoil fittings are crucial to prevent thread stripping or binding. An important factor to consider when constantly changing rig configurations. There are also two Sony 8T points at the rear of the plate.

Combines With:
The Top Plate can also be used with B4004.1006 Filler piece to add a third NATO rail in the middle which provides a centered mounting point. Useful for gimbal builds & other setups where the FX6 handle is not required.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- Sony FX6 Top Plate Filler Piece -

This Filler Piece attaches to the top of the Sony FX6, providing a centered mounting point for accessories. It is compatible with NATO standard accessories with multiple threaded points.

This Filler Piece attaches to the top of the Sony FX6 and provides a NATO rail along the length of the camera.

Helicoil, NATO 8T and QD
When it comes to rigging, you can choose from threaded, NATO and QD points, or any combination you need. All threaded points are stainless-steel helicoiled for added strength. Helicoil fittings are crucial to prevent thread stripping or binding. An important factor to consider when constantly changing rig configurations. There are also two Sony 8T points at the rear of the plate.

Combines With:
The Filler Piece is designed to be used with B4004.1005 Sony FX6 Top Plate to create a level surface with the middle rail being centered to the camera. This is useful for gimbal work and accessories like a NATO top handle to get correct balance.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- Mini Axl (Sony FX6) -

This Mini Axl kit contains everything you need to replace the original mount for your Sony FX6 monitor, adding flexible positioning, drag adjustment and sag-free support for the FX9 Loupe.

This kit includes the Folding NATO Rail, Monitor Holder, 15mm Rod Mount & the NATO Rotating Bar.

This kit comes complete with everything you need to use your Sony FX6 monitor with the Mini Axl. It is designed to be compact while adding flexibility in how you want to position the monitor. The NATO rail can be attached to the front or rear Sony 8T point on the handle.

The extension rail mounts to the 15mm rod clamp, allowing it to pivot 360-degrees. The arm can then be rotated for extra height or reach, and can be folded flat when not in use. The removable orange threaded cap prevents the rail from falling out, while a removable stud provides a safety stop for attached accessories.

You can adjust the amount of drag on the tilt-axis by using the locking screw, capable of supporting the weight of the FX9 loupe.

The monitor holder is custom matched to the FX6 monitor, with a 3/8" thread for attaching to the included 15mm rod mount or other accessories.

When transporting the camera, the monitor can be folded into the stowed position.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- Sony FX6 Top Handle Brace -

Add a rigid bracket to support the Sony FX6 Top Handle, anchoring the Folding NATO Rail to the Sony FX6 Top Plate, the Brace removes flex & physical stress from the Top Handle.

The Sony FX6 Top Handle Brace reinforces the top handle, adding rigidity and support. It reduces the physical stress on the top handle and transfers the weight to the top plate.

Combined With:
The brace connects to B4004.1008 Sony FX6 8T Folding NATO Rail and anchors it to B4004.1005 Sony FX6 Top Plate.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

- 12" Drumstix 15mm Sterling Titanium Support Rods -

Drumstix Sterling Titanium Support Rods are like no other rods. With featherweight mass and rock solid support, they will change the way you film. Be dextrous. Be agile. Be free. We let you focus on what's important, so you never miss a beat. 15mm support rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, our Drumstix' titanium resilience will support your needs without restrictions. Welcome, to the new standard of operation.

As filmmakers, we understand that you take your set-up seriously and is as unique as you are. We think support rods shouldn't be considered consumables. It's a hassle to deal with, damaging for our environment, but most importantly - it doesn't have to be that way anymore. The meta has shifted.

Steady, Sturdy and British
Our R&D team has tried, tested and developed a new formula to manufacture Sterling Titanium - the metal we are using for our Drumstix. That makes them both the strongest and lightest support rod available.

Let's Get Something Straight
Compared to carbon, aluminum and steel bars, our Drumstix' offer a superior strength to weight ratio. Now, there is no need to compromise your shot for the sake of saving weight or limitations of the gear. By removing weight you remove burdens. Become more agile than ever, go handheld more often for organic movement for longer shots and travel to further distances than before. With your support rods being lighter than ever you can capitalize on more gear that would otherwise be too physically demanding. Either way, you can capture what wasn't possible before using Drumstix' innovation. Drumstix' lightens your carry on weight when travelling or filming. That means easier flying or another lens, a steadier shot or an extra hour of endurance. Ultimately, this is up to you.