Bright Tangerine Titan Arm 2 with 1/4"-20 and 3/8"-16 Screw Adapter, Tangerine

With the Titan Arm 2 (3/8" - 1/4"), we've created a monitor arm that's built to last a lifetime. Thanks to a unique self-supporting design, the Titan Arm is able to hold its position even when fully unlocked - and that'll only change if you want to adjust it.

With a 3/8" screw at one end and a 1/4"at the other, the Titan Arm 2 can hold up monitors, lights or even small cameras.

For a lifetime of strength, the Titan Arm 2 3/8"-1/4" Kit provides everything you need to get set up with the new and improved Titan Arm. The Arm has a patented system for retaining strength and stability - even when fully unlocked. The Titan Arm has a strength capacity of 5kg from its interchangeable mounting points: with multiple Adapter options available.

Built from top-quality stainless steel and anodized aluminum, the Titan Arm 2 is built to withstand the toughest of shoots.

No Slack
The Titan Arm 2 features a unique friction-based system, which shifts the pressure on the mechanism to different positions as the arm pivots. This means that the mechanism won't strip out or wear down over time. The Titan Arm 2 is guaranteed to last.

Self-Supporting
In those high-pressure moments on set, it can be frustrating having to unlock and re-lock a traditional monitor arm. With the Titan Arm 2, you can reposition the arm even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady - even with the lever unlocked.

Essential Mounting Options
The Kit features a 1/4" and 3/8" screw, both of which can be exchanged for either end of the Titan Arm. These industry-standard mounting screws give you the freedom to use the Titan Arm however you need. Mount a monitor to a larger cinema camera, or mount a whole compact camera to a plate or cage - the possibilities are endless.

Note: The included Adapters do not feature anti-twist pins or a thumbscrew design. These can be found in the 3/8" AT-1/4" AT Kit.

Strength of a Titan
Using our patented design, the Titan Arm 2 is stronger than ever: bearing a load of 5kg without breaking a sweat. The dual ball-and-socket joints give you full freedom of positioning: so the arm can be mounted from any angle to almost any surface.

Interchangeable
But if 3/8" or 1/4" aren't what you need, you can replace them. Both ends of the Titan Arm 2 can be removed, meaning that you can swap either end over, or trade them for a NATO Adapter for quick-release convenience. It takes moments to rearrange your rig, making the Titan Arm 2 ideal for on-the-fly adjustments to your setup.

Built to Last
The Titan Arm 2 is built from high-grade anodized aluminum and stainless steel, for the ultimate balance of strength and durability. You can comfortably hold and reposition the arm at any time thanks to a patented mechanism. For particularly dirty, dusty or rusty locations; the Titan Arm 2 is internally sealed for added protection.

The Titan Arm 2 Range
Level up your setup with the Bright Tangerine Titan Arm 2, which offers new freedom for mounting monitors or any other accessories. The Arm has a load capacity of 5kg and a patented system for retaining strength. No matter your setup, the Titan Arm 2 can accommodate thanks to its interchangeable mounting system.

Compatibility
The Titan Arm 2 (3/8"-1/4") Kit is compatible with any industry-standard 1/4" or 3/8" screw; allowing the arm to be mounted to and from almost any type of surface including cameras, dovetails and cheese plates. The Adapters can also be exchanged with 1/4" or 3/8" thumbscrews or a NATO clamp, for enhanced convenience.

- 1/4"-20 Screw Adapter -
The Titan Arm 2 Adapter (1/4") adds a clean 1/4"-20 screw for either end of the Titan Arm 2. Installed via a single M4 screw, the Adapter is a simple and discreet means of mounting and can be easily replaced with alternative mounts.

Features
• 1/4"-20 Screw - Attach a wide range of industry-standard accessories via the 1/4"-20 screw
• Quick Installation - The 1/4" Adapter is easily installed with a 2.5mm Hex Key
• Interchangeable - Swap the Adapter for alternative mounts such as 3/8" or NATO Adapters in moments
• Durable - The stainless steel build means that the Adapter won't strip out or rust
• For Either End - The 1/4" Adapter can be mounted to either end of the Titan Arm 2

Maximize your Titan Arm 2's versatility with this conveniently-sized 1/4" Adapter. It installs cleanly via a single screw and can be swapped out for alternatives including 3/8", NATO or an anti-twist thumbscrew mount. Ideal for monitors, the 1/4" Adapter is a simple yet effective option for your Titan Arm.

Convenient Mounting Options
With this adapter, the Titan Arm 2 is capable of being installed with any 1/4" accessory - and conversely, it can be installed onto any 1/4" mounting slot. Thanks to the Titan Arm 2's ball-and-socket joints, this gives you unprecedented freedom to adjust and install components.

Expansive Possibilities
1/4"-20 mounts are near-universal, and so are the possibilities for using this adapter. Anything from external monitors to entire compact cameras feature a 1/4" mounting thread, meaning that the options for either end of your Titan Arm are never limited.

Part of the Titan Arm System
The Titan Arm 2 revolutionizes the monitor arm market with an innovative redesign of our bestselling Titan Arm. With interchangeable mounts at both ends, the Titan Arm 2 offers expansive possibilities for mounting and use, and is built with Bright Tangerine's objective of sustainability at the forefront of the design. Expand your possibilities with the Titan Arm 2 today.

Compatibility
The Titan Arm 2 Adapter (1/4") is compatible with the Titan Arm 2's ball-and-socket joints at either end. The 1/4" screw is compatible with a range of industry-standard mounting points for cameras, plates and monitors.

- 3/8" 16 Screw Adapter -
The Titan Arm 2 Adapter (3/8") provides a 3/8" screw for either end of the Titan Arm 2's ball-and-socket joints. It installs cleanly via a single screw and can be swapped out for alternatives including 1/4", NATO or an anti-twist thumbscrew.

Features
• 3/8" Screw - Attach the Titan Arm to any standard 3/8"-16 screw thread
• Quick Installation - The 3/8" Adapter is easily installed with a 2.5mm Hex Key
• Interchangeable - Swap the Adapter for alternative mounts in moments
• Durable - The stainless steel build means that the Adapter won't strip out or rust
• For Either End - The 3/8" Adapter can be mounted to either end of the Titan Arm 2

Simple yet effective, our standard Titan Arm 2 3/8" Adapter allows you to attach the Titan Arm to any standard 3/8"-16 screw thread. Cleanly installed with a single screw - and just as easily uninstalled - the Adapter is easy to use.

With a stainless steel build that won't rust or corrode, set yourself up for life with this Titan Arm 2 Adapter.

3/8" Mounting
This Titan Arm 2 Anti-Twist Adapter provides a convenient 3/8"-16 mounting point for either end of your monitor arm - making it compatible with any corresponding screw thread. Found on everything from camera bases to cheese plates, this gives you freedom of mounting to or from whatever you need.

Simple Installation
The Adapter installs via a single M4 screw to the Titan Arm, with just a few twists of a 2.5mm Hex Key. The countersunk screw thread keeps the form factor of the adapter discreet, for clean rigging.

Interchangeable
With the Titan Arm 2, the possibilities are endless. The Adapter can be swapped out for a 1/4"-20 or NATO option at either end (or the Anti-Twist 3/8" Adapter for added security) meaning that you can attach your monitor arm to any standard-issue mounting thread.