Bright Tangerine Titan Arm 2 Ti with 1/4"-20 and 3/8"-16 Anti-Twist Adapter, London Fog

- Titan Arm 2 Ti -
After hours of rough treatment, over-straining and old-fashioned carelessness; your average camera arm will wear down. But the Titan Arm 2 Ti is not your average camera arm. The new titanium pistons give you even more strength and functionality without breaking the budget - and is guaranteed to last long after you've wrapped. Coming in sleek London Fog black, expand what's possible with the Titan Arm 2 Ti today.

Strength of a Titan
If you're a filmmaker whose chemistry knowledge ends at Breaking Bad, the "Ti" of our new Titan Arm refers to titanium: one of the strongest and lightest materials on earth. This means that the Titan Arm 2 Ti only weighs a few ounces more than its predecessor, whilst allowing you to pack on the pounds.

No Breakdowns
Speaking of, we've almost doubled the strength of the Titan Arm 2, with a payload capacity going from 5kg to 8kg. This means that you have even more freedom to customize your camera: from bulkier monitors with more powerful batteries through to entire camera systems. Whether you need it or not, the Titan Arm 2 Ti's reinforced pistons can hold up whole rigs without breaking a sweat.

Self-Supporting
In those high-pressure moments on set, it can be frustrating having to unlock and re-lock a traditional monitor arm. With the Titan Arm 2 Ti, the arm moves when you want it to, and stays still when you don't. You can reposition the arm, even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady - even with the lever unlocked.

Tool-Free Tweaking
For on-the-fly adjustment and quick pack-downs, the 1/4" and 3/8" adapters are designed with anti-twist thumbscrews. Minimize the downtime by quickly releasing and attaching whatever you need to the Titan Arm - your 1st AD will thank you for it.

Ideal for Monitors
The 1/4" Adapter comes with removeable locating pins that help you mount different monitor standards; including Atomos, SmallHD and ARRI. If you don't need them, they can be stowed inside the head of the Titan Arm - with each pin having a marked niche.

Adaptable
And if 3/8" or 1/4" aren't what the call sheet calls for, you can replace them. Both ends of the Titan Arm can be removed, meaning that you can swap either end over, trade them for a NATO Adapter for quick-release convenience or even add lighting with our Baby Pin Adapters. It takes moments to rearrange your rig, making the Titan Arm 2 ideal for on-the-fly adjustments to your setup. The dual ball-and-socket joints give you full freedom of positioning: so the arm can be mounted from any angle to almost any surface.

Designed for Good
The Titan Arm 2 Ti isn't just built to last, it's built to be the last. The mechanism will be as strong today as in ten years' time; and the high-grade build of titanium, aluminum and stainless steel can withstand even the worst set conditions. Long after your camera has upgraded and your other gear has degraded, the Titan Arm 2 Ti will be working like new.

Compatibility
The Titan Arm 2 is fully compatible with any camera and monitor system, and can be mounted via any industry-standard 1/4" and 3/8" thread. The monitor mount end of the Titan Arm has marked locating pins for compatibility with Atomos, ARRI and SmallHD monitor standards, with pins that can be removed depending on which monitor is being used. Adapters can be removed and swapped out for alternatives such as a NATO clamp or 5/8" Baby Pin Adapters for lighting.

Part of the Titan Arm 2 System
More than just a monitor arm: the Titan Arm 2 Ti is the next-generation upgrade to our bestselling rigging arm. Stronger and more versatile, the new arm is built to last and versatile enough to suit any shooting scenario. Redefine your rig today.


- 1/4"-20 Anti-Twist Adapter -
The Titan Arm 2 Anti-Twist Adapter attaches to either end of the Titan Arm 2, providing a mount for anything with a 3/8" screw thread. With removeable anti-twist locating pins to help secure the mount in place, the 3/8"-16 Adapter provides a steady grip on any appliance. The Adapter requires no tools to mount, using an ergonomic thumbscrew to tighten and loosen.

Maximize your Titan Arm 2's versatility with this conveniently-sized 1/4" Adapter. This Adapter conveniently converts your Titan Arm for use with 1/4" mounting sockets, and can be used at either end of the monitor arm. For different monitor standards, the Adapter has removeable or spring-loaded locating pins: which can be discreetly stowed in the Adapter body. Expand on the potential of your Titan Arm 2 with this reliable and durable adapter: purpose-built for the Titan Arm 2.

Convenient Mounting Options
With this adapter, the Titan Arm 2 is capable of being installed with any 1/4" accessory - and conversely, it can be installed onto any 1/4" mounting slot. Thanks to the Titan Arm 2's ball-and-socket joints, this gives you unprecedented freedom to adjust and install components.

Expansive Possibilities
1/4"-20 mounts are near-universal, and so are the possibilities for using this adapter. Though the Titan Arm 2 Anti-Twist Adapter is primarily designed for mounting monitors, this adapter broadens its capabilities. Ideal for the more experimental filmmaker or complex rigs with limited space, you can position the arm or compatible equipment anywhere.

Multiple Monitor Standards
For specific monitors, the Titan Arm 2 Adapter comes with dedicated anti-twist locating pins; conforming to different monitor standards including Atomos, SmallHD and ARRI. With the two central pins being spring loaded and the rest removeable and stored within the Adapter body, you can always ensure that your monitor is correctly mounted.

Compatibility
The Titan Arm 2 Anti-Twist Adapter (1/4") is compatible with the Titan Arm 2's ball-and-socket joints at either end. The 1/4" screw is compatible with a range of industry-standard mounting points, and has two spring-loaded anti-twist pins - in the Atomos standard configuration - to help locate your device.

For monitors, there are additional locating pins in the SmallHD and ARRI standard, which can be removed with a flathead screwdriver. The M4 screw required to secure the Anti-Twist Adapter to the Titan Arm is 10mm in length, whilst the screw for the non-anti-twist variants is 8mm in length and the NATO Adapter's is 12mm in length.

Features
• Ultra-Compatible - The 1/4"-20 standard thread offers adaptability to various mounting solutions
• Interchangeable - The adapter can be quickly swapped for alternate mounts such as the Titan Arm 2 3/8"-16 Adapter
• Thumbscrew Design - Install your monitor or other accessory without tools
• Multiple Monitor Standards - The 1/4"-20 features removeable anti-twist pins for a range of monitor standards
• Multipurpose - The adapter can be used at either end of the Titan Arm 2


- 3/8" Anti-Twist Adapter -
The Titan Arm 2 Anti-Twist Adapter attaches to either end of the Titan Arm 2, providing a mount for anything with a 3/8" screw thread. With removeable anti-twist locating pins to help secure the mount in place, the 3/8"-16 Adapter provides a steady grip on any appliance. The Adapter requires no tools to mount, using an ergonomic thumbscrew to tighten and loosen.

Convert your Titan Arm 2 with this 3/8"-16 Adapter: offering a stable mount for either end of your monitor arm. With a built-in thumbscrew for installing your monitor or other accessory, you can use the Adapter completely tool-free for on-the-go changes. Optional anti-twist pins help maintain a strong grip, and the Adapter can be swapped out for 1/4"-20 or NATO quick-release alternatives. Compatible with either end of the Titan Arm 2, the Anti-Twist Adapter sets a new standard in convenience.

3/8" Mounting
This Titan Arm 2 Anti-Twist Adapter provides a convenient 3/8"-16 mounting point for either end of your monitor arm - making it compatible with any corresponding screw thread. The Adapter features a pair of locating pins to minimize twisting and help lock your components in place. You can also stow the anti-twist pins for broader use.

Clean Installation
The 3/8" mount is tightened and turned via a convenient thumbscrew design, nestled in the middle of the adapter. This means that installing your monitor or other mount is completely tool-free. The thumbscrew does come with slots for a Hex Key should you need some extra force for tightening, but the mechanism is designed to be secure when you need it - and easily loosened when you don't.

Interchangeable
With the Titan Arm 2, the possibilities are endless. The Adapter can be swapped out for a 1/4"-20 or NATO option at either end, meaning that you can attach your monitor arm to any standard-issue mounting thread.

Compatibility
The Titan Arm 2 Anti-Twist Adapter (3/8") is compatible with the Titan Arm 2's ball-and-socket joints at either end. The 3/8" screw is compatible with a range of industry-standard mounting points.

The M4 screw required to secure the Anti-Twist Adapter to the Titan Arm is 10mm in length, whilst the screw for the non-anti-twist variants is 8mm in length and the NATO Adapter's is 12mm in length.

Features
• Versatile 3/8"-16 Mount - Convert your Titan Arm for use with any 3/8" screw thread
• Locating Pins with Storage - The Adapter comes with anti-twist pins that can be removed and stored
• Thumbscrew Design - Mount your accessory by twisting a built-in thumbscrew