Bright Tangerine Titan Arm 2 Ti with 1/4"-20 and 3/8"-16 Screw Adapter, Tangerine

- Titan Arm 2 Ti -
From mounting standard monitors to fully-fledged B-cameras, nothing beats the Titan Arm 2 Ti. Titanium-reinforced pistons make this articulating arm stronger than ever, with the same friction-based mechanism that ensures long-lasting performance with no slack. Whether it's an impatient Director yanking at the monitor or a Gaffer wanting to fix up an extra fill light at the last minute, the Titan Arm 2 Ti is the number one choice. At just a few dollars more than the original, the Titan Arm 2 Ti - ironically - doesn't cost an arm and a leg.

Strength of a Titan
If you're a filmmaker whose chemistry knowledge ends at Breaking Bad, the "Ti" of our new Titan Arm refers to titanium: one of the strongest and lightest materials on earth. This means that the Titan Arm 2 Ti only weighs a few ounces more than its predecessor, whilst allowing you to pack on the pounds.

Stronger than Strong
Speaking of, we've almost doubled the strength of the Titan Arm 2, with a payload capacity going from 5kg to 8kg. This means that you have even more freedom to customize your camera: from bulkier monitors with more powerful batteries through to entire camera systems. Whether you need it or not, the Titan Arm 2 Ti's reinforced pistons can hold up whole rigs without breaking a sweat.

Self-Supporting
In those high-pressure moments on set, it can be frustrating having to unlock and re-lock a traditional monitor arm. With the Titan Arm 2 Ti, the arm moves when you want it to, and stays still when you don't. You can reposition the arm, even when the mechanism is fully locked. And on the other end of the spectrum, the Arm has enough internal strength to stay steady - even with the lever unlocked.

Essential Mounting Options
The Titan Arm 2 Ti features a 1/4" and 3/8" screw, both of which can be exchanged for either end of the Titan Arm. These industry-standard mounting screws give you the freedom to use the Titan Arm however you need. Mount a monitor to a larger cinema camera, or mount a whole compact camera to a plate or cage - the possibilities are endless.

Adaptable
But if 3/8" or 1/4" aren't what you need, you can replace them. Both ends of the Titan Arm can be removed, meaning that you can swap either end over, trade them for a NATO Adapter for quick-release convenience or even add lighting with our Baby Pin Adapters. It takes moments to rearrange your rig, making the Titan Arm 2 ideal for on-the-fly adjustments to your setup. The dual ball-and-socket joints give you full freedom of positioning: so the arm can be mounted from any angle to almost any surface.

Designed for Good
The Titan Arm 2 Ti isn't just built to last, it's built to be the last. The mechanism will be as strong today as in ten years' time; and the high-grade build of titanium, aluminum and stainless steel can withstand even the worst set conditions. Long after your camera has upgraded and your other gear has degraded, the Titan Arm 2 Ti will be working like new.

Compatibility
The Titan Arm 2 Ti is compatible with any camera rig, and comes with one 3/8"-16 and one 1/4"-20 adapter for either end. These Adapters can be removed and swapped out for alternatives, such as anti-twist thumbscrews, a NATO clamp or even Baby Pin Adapters for lighting.

Part of the Titan Arm 2 System
More than just a monitor arm: the Titan Arm 2 Ti is the next-generation upgrade to our bestselling rigging arm. Stronger and more versatile, the new arm is built to last and versatile enough to suit any shooting scenario. Redefine your rig today.

- 1/4"-20 Screw Adapter -
The Titan Arm 2 Adapter (1/4") adds a clean 1/4"-20 screw for either end of the Titan Arm 2. Installed via a single M4 screw, the Adapter is a simple and discreet means of mounting and can be easily replaced with alternative mounts.

Maximize your Titan Arm 2's versatility with this conveniently-sized 1/4" Adapter. It installs cleanly via a single screw and can be swapped out for alternatives including 3/8", NATO or an anti-twist thumbscrew mount. Ideal for monitors, the 1/4" Adapter is a simple yet effective option for your Titan Arm.

Convenient Mounting Options
With this adapter, the Titan Arm 2 is capable of being installed with any 1/4" accessory - and conversely, it can be installed onto any 1/4" mounting slot. Thanks to the Titan Arm 2's ball-and-socket joints, this gives you unprecedented freedom to adjust and install components.

Expansive Possibilities
1/4"-20 mounts are near-universal, and so are the possibilities for using this adapter. Anything from external monitors to entire compact cameras feature a 1/4" mounting thread, meaning that the options for either end of your Titan Arm are never limited.

Features
• 1/4"-20 Screw - Attach a wide range of industry-standard accessories via the 1/4"-20 screw
• Quick Installation - The 1/4" Adapter is easily installed with a 2.5mm Hex Key
• Interchangeable - Swap the Adapter for alternative mounts such as 3/8" or NATO Adapters in moments
• Durable - The stainless steel build means that the Adapter won't strip out or rust
• For Either End - The 1/4" Adapter can be mounted to either end of the Titan Arm 2

- 3/8"-16 Screw Adapter -
The Titan Arm 2 Adapter (3/8") provides a 3/8" screw for either end of the Titan Arm 2's ball-and-socket joints. It installs cleanly via a single screw and can be swapped out for alternatives including 1/4", NATO or an anti-twist thumbscrew.

Simple yet effective, our standard Titan Arm 2 3/8" Adapter allows you to attach the Titan Arm to any standard 3/8"-16 screw thread. Cleanly installed with a single screw - and just as easily uninstalled - the Adapter is easy to use. With a stainless steel build that won't rust or corrode, set yourself up for life with this Titan Arm 2 Adapter.

3/8" Mounting
This Titan Arm 2 Anti-Twist Adapter provides a convenient 3/8"-16 mounting point for either end of your monitor arm - making it compatible with any corresponding screw thread. Found on everything from camera bases to cheese plates, this gives you freedom of mounting to or from whatever you need.

Simple Installation
The Adapter installs via a single M4 screw to the Titan Arm, with just a few twists of a 2.5mm Hex Key. The countersunk screw thread keeps the form factor of the adapter discreet, for clean rigging.

Interchangeable
With the Titan Arm 2, the possibilities are endless. The Adapter can be swapped out for a 1/4"-20 or NATO option at either end (or the Anti-Twist 3/8" Adapter for added security) meaning that you can attach your monitor arm to any standard-issue mounting thread.

Features
• 3/8" Screw - Attach the Titan Arm to any standard 3/8"-16 screw thread
• Quick Installation - The 3/8" Adapter is easily installed with a 2.5mm Hex Key
• Interchangeable - Swap the Adapter for alternative mounts in moments
• Durable - The stainless steel build means that the Adapter won't strip out or rust
• For Either End - The 3/8" Adapter can be mounted to either end of the Titan Arm 2