Bright Tangerine Universal Monitor Mount with 1/4"-20 Anti-Twist Screw and 15mm Rod Base

Reliability shouldn't be a question; it should be as standard. With our Universal Monitor Mount, you can reliably rig any monitor to any camera setup - all with the confidence that it won't break under pressure. Support your vision today with the Universal Monitor Mount.

A broken monitor is the sort of thing you can't fix in post. With our Universal Monitor Mount system, you won't have to. Mounting to 15mm rods, you can create an ergonomic monitor setup on any camera - and with the unique universal anti-twist system, you can use any monitor. Holding up to 2.5kg of weight without slack, our Universal Monitor Mount is the reliable monitor solution you've been looking for.

Easy Rigging
The base of the Universal Monitor Mount attaches to 15mm rods, giving you freedom to fit the Monitor wherever you like. Attach it to a handle via our Top Bar Bracket and 15mm Rod Mount, or give yourself a convenient offset from a compatible Top Plate with our MAP M4 15mm Rod Mounting Bracket. Simply tighten the winged-lever clamp and your monitor will be locked in place.

Pan, Tilt & More
Whether you're going low-angle on a handheld shot or doing an overhead view; standing operator-side on a shoot or sat behind the camera, the Monitor Mount can handle any point of view. The independent pan and tilt mechanisms give you free articulation: 180 Degree tilting up-and-down, and a full 360 Degree pan. The Monitor Mount keeps you level by providing tactile feedback clicks every 90 Degree turn - so you have the right angle every right-angle.

Mount Multiple Monitors
Mounting monitors can be complicated: most use a standard 1/4" screw, but the location for locating pins changes between ARRI, Atomos and SmallHD standards. Our mounting system, which features a removeable pin for each monitor standard, cuts out the second-guessing - making it quick and easy to set up your view. The Monitor Mount features a storage slot for the locating pin when not in use.

Accurate Anti-Twist
Ever had a monitor strip out, even when you were sure you'd secured in place? When we say "anti-twist", we mean it. Our pin system is robust and reliable, keeping the monitor aligned on the mount at all times.

Clean & Compact
The Universal Monitor Mount maintains a low profile on your rig, making it perfect for minimalist setups. If you are tired of squinting into your camera's built-in EVF or screen, mounting a monitor has never been easier. The Monitor Mount can handle up to 2.5kg in weight - more than enough for even some of the heaviest monitors. The only breaks should be the ones on the callsheet.

Expandable, not Expendable
The Universal Monitor Mount opens up a range of possibilities: creating a full handle and monitor setup that can cleanly transition from different camera systems. With the combination of any of our compatible Top Handles, a dedicated Top Bar Bracket and this Monitor Mount (plus one of our 15mm Drumstix rods); you can build a clean and low-profile combo that is perfect for a range of rigs.

Part of the Monitor Mount System
Filmmaking is an expensive trade, and a cracked monitor is a mistake you can't afford to make even once. Our Universal Monitor Mounts are durable and dependable, for long-lasting success. Made from aerospace-grade aluminum, each Monitor Mount is designed to withstand the worst that your shoots can throw at it.

Compatibility
The Universal Monitor Mount (1/4"-20 Top, 15mm Rod Base) is designed to be compatible with any camera and any monitor. The base mounts to any industry-standard 15mm rod, and the 1/4"-20 screw on top has an optional locating pin that is compatible with SmallHD, Atomos and ARRI monitor mounting standards.