Bright Tangerine DJI RS 2/3 Expert Kit for RED KOMODO

Prepare your RED KOMODO for any filmmaking project with a full accessory package that doesn't compromise on anything. Go from tripod, to handheld or gimbal in seconds with a DJI RS 2 & RS 3 compatible baseplate.

Each kit comes with the Side Plates, Top Plate, NATO Top Handle, Top Bar Bracket, LeftField 15mm LWS Baseplate (DJI RS 2 & RS 3) & a set of two 15mm (12" length) Sterling Titanium Drumstix Rods.

At the core of the LeftField system for the RED KOMODO is a set of NATO compatible plates which wrap around the camera to form a steady foundation. From here, you can accessories the camera in any way you like using NATO accessories or directly mounting to the helicoil reinforced 1/4" & 3/8" threads. The plates also provide the mounting points required for LeftField Adapter Support range.

Instantly transition between gimbal, tripod & handheld setups. It is compatible with the DJI RS 3 Pro, RS 3 & RS 2 gimbals.

- Top Rail -
This Top Rail attaches to the top of the RED KOMODO, providing a secure mounting point for top handles and other NATO based accessories. When attaching a Top Handle, a special locating dimple lets you know when it is perfectly centered. The Top Rail also features two military-standard Quick-Detach (QD) points for straps & tethers.

Helicoil, NATO and QD
When it comes to fixing, you can choose from threaded, NATO and QD points, or any combination you need. All threaded points are stainless-steel helicoiled for added strength. Helicoil fittings are crucial to prevent thread stripping or binding. An important factor to consider when constantly changing rig configurations.

Combines With:
The Top Rail can be used with the NATO top handle & 15mm top bar bracket. It can also be used with any other standard NATO accessories.

Features
• Features 2x 3/8", 1x 1/4" & 2x Quick Detach (QD) points
• Helicoils for durability
• Mounting points for lens adapter supports will require Side Plate Kit to fully use the adapter supports

- Left-Side Rail -
This Side Plate attaches to the right side of the RED KOMODO to provide secure mounting & rigging points for accessories like handles and rod mounts. It is also compatible with NATO standard accessories.

Helicoil & NATO
When it comes to fixing, you can choose from threaded points or the NATO rail. All threaded points are stainless-steel helicoiled for added strength. Helicoil fittings are crucial to prevent thread stripping or binding. An important factor to consider when constantly changing rig configurations.

Strength & Lightness
Each section of the side plate is CNC cut from high-grade aluminum alloy billet, which is then hard anodized for extra durability. The result is highly resilient component, which is also extremely light-weight at only 35 grams each. The low-profile design is also a handy feature when creating compact camera builds.

Features
• Features 3x 3/8" & 2x 1/4" accessory mounts with helicoils
• Integrated NATO rail with safety stops
• Helicoils to prevent threads from stripping and loosening
• Mounting points for lens adapter supports - but requires top plate to fully use the adapter supports

- Right-Side Rail -
This Side Plate attaches to the left side of the RED KOMODO to provide secure mounting & rigging points for accessories like handles and rod mounts. It is also compatible with NATO standard accessories.

Features
• Features 3x 3/8" & 2x 1/4" accessory mounts with helicoils
• Integrated NATO rail with safety stops
• Helicoils to prevent threads from stripping and loosening
• Mounting points for lens adapter supports - but requires top plate to fully use the adapter supports

- NATO Top Handle -
Add a perfectly balanced carrying handle onto your camera. The handle mounts onto any standard NATO rail with side to side adjustment.

To adjust the balance, simply unlock the lever, and slide the handle bar into position for the camera build, whether it's a compact build or a larger front-heavy setup. Two spring-loaded safety stops will prevent the handle bar from accidentally sliding out completely.

Features
• Handle bar can slide backwards or forwards for optimal weight distribution with safety stops
• Multiple accessory mounting points, including cold shoe, 1/4" & 3/8" anti-twist points
• Integrated Quick-Detach (QD) points for attaching a camera strap
• Reversible to enable a change of accessory mounting layout
• Vertical post features mounting points for Top Bar Bracket (B4003.1022) for 15mm rods

- Top Bar Bracket -
Attach the Top Bar Bracket to the NATO Top Handle to use 15mm rod mounted accessories like an EVF mount or lens motor without the need for a baseplate.

Strength & Lightness
Every part of the LeftField System is machined from single aluminum-alloy billets to create extremely rigid and lightweight components.

Features
• Two Way Mount - Use the included bracket to mount to the NATO Top Handle post, or to any 3/8" ARRI Accessory point
• Supports two standard 15mm rods with individual locks
• Useful for mounting EVF bracket, lens motors & other accessories
• Can be used in high or low mode to suit a wide range of configurations

- LeftField Universal 15mm LWS Quick Release Baseplate Core Mk II -
The LeftField 15mm LWS Quick Release Baseplate Core Mk II speeds up your workflow while filming.

Using the patented Open-UP Quick Release System, you can quickly change from handheld shooting to tripod in seconds. Securely mount to any ARRI standard dovetail or LeftField plate with vertical release.

The universal baseplate can be used with multiple camera systems by simply swapping the riser blocks.

The LeftField 15mm LWS Quick Release Baseplate Core Mk II is a universal baseplate designed to work with a number of camera systems using interchangeable riser blocks to provide the correct optical height for each camera.

If you own, rent or work with multiple cameras, you can simply swap out the riser block to get the correct optical height for multiple cameras.

The baseplate uses the patented Open-UP Quick Release system to work with any standard ARRI dovetail and can also be used with the low profile LeftField ARRI Dovetail Plate to quickly go from tripod to shoulder mount or gimbal. The sliding base also helps to provide optimal balance for the camera operator.

The three-stage lever lets you vertically release, slide and securely lock into place. A safety mechanism prevents any accidental releases. Safety stops on the bottom of the baseplate engage with full-size ARRI dovetail safety stops and can be retracted when used with the LeftField Dovetail plate, perfect for transitioning from tripod to shoulder mount or gimbal. The sliding base also helps to provide optimal balance for the camera operator.

The baseplate mounts two industry-standard 15mm LWS rods which are secured with the kip levers. If you need to travel frequently or pack light, two sets of shorter rods can be used to create a longer rod mount. If a single set of long rods is used, the front and rear kip levers can be used to provide extra rigidity.

Designed to last, the baseplate is machined from a single block of aluminum to handle the most extreme environments.

Features
• Adaptable to multiple camera systems with Riser blocks
• Patented Open-UP Quick Release System
• Snap on/off, slide & securely lock in place
• ARRI Dovetail standard
• Front & Rear 15mm LWS rod mounts
• Multiple accessory mounts
• Rugged single block design

- LeftField ARRI Dovetail Plate -
The Left Field ARRI Dovetail Plate is a quick release cheese plate that is compatible with the Left Field 15mm LWS Baseplate and Sliding Top Plates.

The LeftField ARRI Dovetail Plate is a multipurpose quick release plate featuring multiple 1/4", 3/8" & ARRI Accessory Mounts.

The low profile plate is based on the ARRI standard dovetail and acts as a quick release plate for a camera setup using the LeftField 15mm LWS Baseplate making the transition going from tripod to handheld much quicker.

When used with the LeftField Sliding Top Plates, the Dovetail plate provides a mounting surface for other accessories like the carrying handle and Titan Arm quick release brackets.

Two removable safety screws prevent the plate from sliding out of the receiving accessory. These two screws can also be mounted on the right side of the plate to fix the dovetail plate into position.

Features
• Versatile quick release plate for camera or top mounted accessories
• Ability for fine adjustment of counter balance
• Multiple 1/4", 3/8" & ARRI Accessory Mounts

- DJI RS 2/3 Riser -
Set the RED KOMODO to the correct height when using the LeftField 15mm LWS Baseplate & DJI RS 2& RS 3 Dovetail.

Features
• Sets Komodo to 15mm LWS height standards
• Designed for the LeftField 15mm LWS Baseplate
• Compatible with DJI RS 2 & RS 3 Dovetail for RED KOMODO
• Integrated safety prevents accidental releases

- DJI RS 2/3 Dovetail -
Mount your RED KOMODO onto the DJI RS 2 & RS 3 Dovetail for faster transitions between the gimbal & tripod setups. The dovetail is designed to be paired with the LeftField RED KOMODO Baseplate (DJI RS 2 & RS 3).

Features
• Compatible with DJI RS 2 & RS 3 gimbals
• 4.5" (115mm) length provides ample fore/aft range
• Extremely lightweight at only 3.3oz (