Bright Tangerine Expert Kit for RED KOMODO-X and RED Touch 7.0"

From the amateur to the auteur, the Expert Kit for RED KOMODO-X and RED Touch 7.0" provides the ultimate RED rig: with a vast array of deep customization options for whatever the call sheet calls for. Compatible with the DSMC RED Touch 7.0" and RMI, the Expert Kit is ideal for RED shooters.

No more compromise: with the Expert Kit for RED KOMODO-X and RED Touch 7.0", you don't have to choose between the rig you want, and the rig you need. Featuring a range of accessory mounting options, from standard bolt-on accessories to 15mm LWS matte box mounts, you'll never struggle to shoot on your RED rig again. With a dedicated setup for the DSMC RED Touch 7.0", the Expert Kit makes sure you have a clean rig no matter the shooting scenario.

Quick-Release Convenience
With our LeftField Mini 15mm LWS Baseplate, you've got end-to-end quick-release for your camera. On the Baseplate itself, our patented Open UP mechanism allows you to effortlessly lift off from any ARRI standard dovetail. With the stacked Riser, Receiver and Universal Dovetail on top, you can also quickly remove the camera from the baseplate for quick settings tweaks or packing up after wrap.

Dovetail Design
But why would you want a more complicated Baseplate? To make things simpler in the long run, we've made it so that you can quickly release the camera from the baseplate. For bigger rigs, this means packing down is quicker and easier, and smaller rigs can hop seamlessly onto gimbals, tripods or shoulder rigs. Even when your call sheet is cutting it close or the director decides to go handheld on the oner, your RED rig will be ready.

RMI-Ready
For a lot of RED KOMODO-X users, cage compatibility with the RED Monitor Interface (RMI) is a major pain point. With our dedicated Top NATO Rail and NATO Top Handle, you'll have a curved and comfortable grip, stabilized by an accompanying Brace that factors in the added height of the RMI. The Handle and Extensions also have rubber inlays, so whether you're wanting to steadily pan on a tripod or are going handheld at a low-angle, your hands won't feel the strain.

Note: You will require a different Brace when shooting without the RMI.

Breathing Room
Though the Left and Right Side Plates may look overly-bulky at first, look a little closer. The double-sided screw threads with anti-twist locating pins mean you can rig accessories to the inside or outside - meaning you can hide messy cables from the BTS Photographer. For cleaner rigs, the Side Plates offer smoother airflow, so your rig doesn't run hot as you run-and-gun. And with the extra Cheese Plate, you won't run out of rigging real-estate.

Deep Customization
In terms of what you can actually mount to your RED rig, you are spoiled for choice. Along with the standard suite of 1/4" and 3/8" screw threads with anti-twist points, the RED KOMODO-X Kit also provides a range of other options for rigging. Camera straps can be slipped off and on via QD sockets on top, along with an integrated NATO rail - which itself mounts the Top Handle and a dedicated Bar Bracket. With forward and side-facing 15mm rods up top, the Top Bar Bracket and Rod Mount offers the ideal point to set up your RED Touch 7.0" monitor.

Adapter-Friendly
A huge draw of the RED ecosystem is not being tied into one lens mount - especially now that Nikon's Z-Mount has joined the family. If you want to try out new primes without damaging your camera's lens mount, the Side Plates and Top Rail feature dedicated mounts for different Lens Adapter Supports - including our own range and RED's native Adapters.

Part of the RED KOMODO System
Enhance the possibilities of your RED KOMODO and KOMODO-X with our range of lightweight and durable accessories: offering new and improved customization and protection options for any RED filmmaker.

Compatibility
The Expert Kit for RED KOMODO-X and RED Touch 7.0" is designed for the RED KOMODO-X specifically: with a dedicated set of Top and Side Plates. The LeftField Mini baseplate and Riser combinations help set the camera to the 15mm LWS standard height for accessory mounting.

The Expert Kit is also compatible with the RED Touch 7.0" monitor and RED Monitor Interface (RMI), however users without the RMI should note that the handle brace will not be at the correct height. In this case, users should either purchase the full non-RMI Expert Kit, or just the alternative Handle Extension Brace.

- Short Create Top Handle (NATO) -
The Short Create Top Handle provides all the functionality of a standard top handle for more compact rigs. Mounting via a side-facing NATO clamp, the Top Handle offers versatile positioning and customization options with a range of 1/4", 3/8" and MAP M4 screw threads. Low-profile for use on smaller rigs, the Top Handle has a rubber grip for a more comfortable hold.

- Master Handle 70mm and 90mm Extension -
Adjust your handle length with our Master Handle Extensions. This extension measures 70mm and 90mmin length and can be paired with other handles and extensions featuring a 3/8" thread.

- Master Handle 90 degree Extension -
Curve the top handle towards the back of your camera using the 90-degree extension. This component creates a 90-degree bend and is compatible with additional handles and extensions equipped with a 3/8" thread.

- Top Handle Rod Bracket Mount -
Want a higher monitor setup? The Top Handle Rod Bracket Mount gives you an alternative mounting setup for your rod brackets: allowing you to mount monitors (including the DSMC RED Touch 7.0") and lens motors from higher up on your rig. Compatible with multiple Top Handles and Rod Bracket options, the Top Handle Rod Bracket Mount gives you enhanced rigging space with ease.

- Top Bar Bracket and 15mm Rod Mount -
The Top Bar Bracket & 15mm Rod Mount adds two forward-facing 15mm LW rod brackets and one side-facing rod mount to the top of your camera setup. With each rod being independently adjusted via its own clamp, the Top Bar Bracket is a convenient mount for lens motors, EVFs and more. Mounting to our Short Create Top Handle (NATO), the Top Bar Bracket is versatile and convenient.

- Handle Extension Brace -
Creating a complex RED rig and looking to support it? Our RED KOMODO-X Handle Extension Brace helps you prop up your Top Handle - especially useful for RED Touch 7.0" users wanting to balance longer handles on the RED Monitor Interface (RMI). Featuring slide-on installation for quick setups and pack-downs, the Handle Extension Brace helps you complete your KOMODO-X build.

- Rear Top Plate -
Give yourself extra rigging freedom with the RED KOMODO-X Rear Top Plate. Along with a selection of mounting points for accessories, the Rear Top Plate helps to brace both your Side Plate and Top Handle - for an overall rigid RED rig. Made to our signature standard of quality, enhance your RED build today.

- Left Side Plate -
If you find that your camera is missing some valuable rigging real-estate, our RED KOMODO-X Left Side Plate is an ideal platform. Featuring a huge range of accessory mounting options, the Side Plate supports a huge range of potential builds. Lightweight yet versatile, the Left Side Plate helps you prepare for whatever the call sheet calls for.

- Right Side Plate -
If you need to properly kit out your KOMODO for a job, then the RED KOMODO-X Right Side Plate is exactly what you need. Offset from the camera for maximized airflow, the Side Plate gives you a vast range of rigging options. Compatible with all camera variants, the Right Side Plate helps you make the most out of your KOMODO.

- Rear Cheeseplate -
Build out the ultimate RED rig: our RED KOMODO-X Rear Cheese Plate gives you further freedom to customize your camera. Use a selection of 1/4" and 3/8" anti-twist screw threads, as well as MAP M4 points; and manage any cables with dedicated cutout slots. Lightweight and durable, the Rear Cheese Plate helps you balance your build.

- Universal Dovetail -
The Universal Dovetail for Manfrotto and DJI RS 4 provides a mount for Manfrotto 5 Series and DJI RS 4 plates - able to mount to either safety standard. It also provides an optional 15mm rod bracket at the front. The Dovetail has both a 1/4" 3/8" screws for compatibility with any camera.

- 46.5-49.5mm LeftField Mini - DJI Riser -
Get your RED rig ready for gimbal shooting with our LeftField Mini DJI Kit (46.5-49.5mm), which takes your RED KOMOD or KOMODO-X setup to new heights. Featuring our unique lift-off system from ARRI standard dovetails and setting the camera to the correct height for DJI gimbals, this kit gives you everything you need to get started with shooting.

- 12" Drumstix Structural Alloy Threaded 15mm Rod Pair -
The Drumstix Structural Alloy range provides a robust and modular 15mm rod system, perfect for supporting camera accessories. Designed with an industry-standard 15mm diameter, these rods can be joined seamlessly to create longer setups, allowing versatile rigging configurations. 12" in length, this dual-rod kit is perfect for supporting long zoom lenses, or front & rear mounted accessories with a 15mm LWS baseplate.

- 8" Create ARRI Standard Dovetail -
The Create ARRI Standard Dovetail (8") is a lightweight, durable and versatile dovetail compatible with ARRI standard baseplates and clamps. Engineered for precise balance and flexible mounting, it's an essential tool for unifying your tripods, gimbals and camera support systems for an efficient workflow.