Bright Tangerine Movi Pro Riser Kit for RED V-RAPTOR Camera Baseplate

Speed up transitions between tripod, handheld & the Freefly Movi Pro with this riser kit. This kit sets the camera to the correct height for 15mm LWS and includes the Freefly Movi riser & camera plate for the RED V-RAPTOR to connect with the LeftField 15mm LWS Universal Baseplate.

Set up the RED V-RAPTOR for 15mm LWS configurations with the ability to quickly switch between the Freefly Systems Movi Pro & the LeftField 15mm LWS Baseplate. Using the three captive screws on the captive shuttle, the camera can be securely mounted with no twisting or movement.

Freefly Systems Movi Pro Compatible
The dovetail is compatible with the Freefly Systems Movi Pro, allowing it to be loaded directly onto the gimbal without the need to change camera plates. The extra length provides ample room for balancing & adjustment.

Laser etched markers along the length of the dovetail let ACs mark down balanced positions on the gimbal.

Support for Accessories
Lens adapters can be secured using the front channel and supplied screws. Two M3 points can be used to mount the Freefly Movi Rod Mount Adapter.

No Compromises
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodized for extended durability.

- Tangerine Movi Pro Riser for 15mm Baseplate & RED V-RAPTOR -
Set the RED V-RAPTOR to the correct height when using the LeftField 15mm LWS Baseplate & Movi Pro Camera Plate. The quick release allows for fast transitions between tripod & gimbal work without needing to change plates.

This interchangeable riser combines with the LeftField Universal 15mm LWS Baseplate and B4002.1061 Movi Pro Camera Plate to set the RED V-RAPTOR at the correct height for 15mm LWS standards. The quick release clamp enables fast transitions between the baseplate & gimbals.

Reliable & Safe
The camera plate is secured using a 4mm Hex key which enables the operator to securely tighten down the clamp with a higher force than a lever. There is also no risk of levers being knocked during operation.

Additional safety points prevent the camera plates from sliding out accidentally.

Freefly System Movi Compatible
The receiver is only compatible with the B4002.1061 Movi Pro Camera Plate for RED V-RAPTOR. It is not compatible with other Movi Pro camera plates.

Features
• Sets RED V-RAPTOR to 15mm LWS height standards when using B4002.1061 Movi Pro Camera Plate for RED V-RAPTOR
• Interchangeable with other LeftField Baseplate Risers
• Integrated safety prevents accidental release, secured with 4mm Hex key

- Universal Extended Movi Pro Camera Plate -
Mount your camera on the LeftField Movi Pro Camera Plate to quick release between the LeftField 15mm LWS Baseplate and Freefly Movi Pro without changing plates. Lens adapters can be supported using the included 3/8" or 1/4" screws.

This dovetail mounts onto your camera and lets you quickly switch between the LeftField 15mm LWS Baseplate to gimbal or handheld in seconds. It also lets you mount the camera directly onto Manfrotto 501PL standard tripods and receivers.

Universal Fit
The dovetail includes three camera mounting screws (two 3/8-16" & a 1/4-20"). Using the three captive screws on the captive shuttle, the camera can be securely mounted with no twisting or movement.

The channel allows the camera to be balanced on the plate for weight distribution with the extra width providing added stability while removing any flex. The screws can be removed when not required for smaller cameras with one or two mounting points.

Support For Accessories
Lens adapters can be secured using the front channel and supplied screws. Depending on the camera height, not all lens feet will be compatible or require spacers.

Features
• Compatible with any camera & Freefly Movi Pro
• Slides onto LeftField 15mm LWS Baseplates with compatible Movi Pro risers
• 144mm length provides ample fore/aft range with racking gear
• Shuttle slides fore/aft to balance camera and keep screws captive
• Wide platform for extra stability with rubber pads for grip