Bright Tangerine 63-65mm LeftField Mini DJI Kit for Canon Cameras

Get gimbal-ready with this LeftField Mini DJI Kit for Canon cameras. The combination of Baseplate and Riser sets your system to the correct height for DJI gimbals, along with providing quick-release convenience from ARRI standard dovetails.

Take your camera to new heights with our LeftField Mini DJI Kit for a range of cameras: including the Canon C80, C400 and the Blackmagic PYXIS. The combination of our Open UP Baseplate and Riser sets your system to the correct height for DJI gimbals, along with providing quick-release convenience from ARRI standard dovetails.

Quick-Release Convenience
Though the LeftField Mini is more compact than LeftField 3 Baseplates, it still features our popular Open UP system for quick-release convenience. This allows you to seamlessly attach the LeftField Mini Baseplate onto any standard ARRI dovetail in moments. When in place, use the lever on the side to transition between locked, sliding and unlocked on the dovetail.

Designed for DJI
The featured Riser is designed to be used with DJI RS gimbals and dovetail plates, providing the necessary height clearance from the camera's optical center. Dovetails are front-loaded into the Riser, offering sliding travel, before being locked in place with the ratcheting lever clamp.

Clean Installation
The Canon Riser comes in three distinct parts: left, middle and right. Each is labelled to avoid confusion and ensure correct directional placement. All three mount via M4 screws, meaning it just takes a standard 3mm Hex Key to install.

Part of the LeftField System
The LeftField system of quick-release baseplates are the most convenient mounting option for professional filmmakers. Our patented Open UP system allows you to cleanly mount your camera rig to any ARRI standard dovetail in moments, and release it just as quickly.

Compatibility
The LeftField Mini DJI Kit (63-65mm) is compatible with the following cameras:
• Blackmagic PYXIS
• Canon C70
• Canon C80
• Canon C200
• Canon C300 Mk III
• Canon C400
• Canon C500 Mk II
• Canon C700

- LeftField Mini 15mm LWS Baseplate -
At 60% of the length of the standard LeftField 3 Baseplate, the LeftField Mini 15mm LWS Baseplate is a compact baseplate for smaller cameras. The LeftField Mini offers a compact alternative to full-size LeftField 3 Baseplates, using our Open UP system for convenient quick-release. The LeftField Mini Baseplate is near-universally compatible when paired with a compatible Riser.

As cameras get smaller, so do their baseplates. With the LeftField Mini 15mm LWS Baseplate, you can downsize your setup whilst still maintaining our ultra-convenient Open UP quick-release system. At 60mm in length - compared to the standard LeftField 3's 100mm - the LeftField Mini Baseplate is ideal for compact rigs, and can be fitted with a huge range of Risers for different camera systems. With the option to expand the Baseplate with accessories such as our KASBAH Shoulder Pad or a Rear Rod Bracket, the LeftField Mini is our best baseplate for compact cameras.

15mm LWS Standard
The LeftField Mini Baseplate has two independently-locking 15mm rod brackets, set to the industry-standard 15mm LWS configuration. Paired with our range of Risers for LeftField Mini, you can set your camera to the correct height for mounting matte boxes, follow-focus motors and much more. There are two different planes for mounting Risers, an upper and a lower, which help mount taller or shorter cameras.

Downsized Design
At just 60mm (2.36") long, the LeftField Mini Baseplate is ultra-compact, making it ideal for small or low-profile camera setups. It can be expanded on if the situation requires it: the Baseplate features an array of MAP M4 points on the sides and can be fitted with an optional Rear Rod Bracket, to help add extra functionality when shooting.

Safety Stop Storage
We've designed the LeftField Mini to be as compatible as possible: with removeable dovetail safety stops that can be conveniently stored inside the Baseplate. The LeftField Mini Baseplate also engages with built-in safety stops on ARRI dovetails, meaning that your camera will never move unless you need it to.

KASBAH Compatibility
The rear of the LeftField Mini Baseplate also has a dedicated slot for the KASBAH Shoulder Pad, which allows you to create a compact shoulder rig. Simply attach the dedicated wedge through the screw slots provided and you can use the comfortable and convenient shoulder mount.

Features
• 15mm LWS Brackets - Mount 15mm support rods via the two individually-locking rod brackets
• Universal Compatibility - Use our range of Risers for LeftField Mini to mount a range of cameras
• Expandable - The LeftField Mini has MAP M4 points on either side and an optional Rear Rod Bracket for additional accessory mounting

- DJI Riser Mount -
The DJI Riser Mount for LeftField Mini helps set your camera to the correct height for DJI dovetails. Coming in three components, the Riser mounts to the LeftField Mini Baseplate with a built-in safety catch for securing or releasing the dovetail. The Riser is compatible with Canon's C70, C80, C200, C300 Mk III, C400, C500 Mk II and C700 cameras and Blackmagic Design's PYXIS.

The DJI Riser Mount for LeftField Mini allows you to use a range of Canon cameras with DJI RS gimbals: setting the camera to the correct height when paired with DJI dovetails. Using a modular system of three plates, the Riser mounts cleanly to the LeftField Mini Baseplate, with an easy-press safety for quick-release. Lightweight and practical, the Riser is compatible with a range of Canon cameras including the Canon C70, C80 and C400 - as well as the Blackmagic PYXIS.

Designed for DJI
The Riser is designed to be used with DJI RS gimbals and dovetail plates, providing the necessary height clearance from the camera's optical center. Dovetails are front-loaded into the Riser, offering sliding travel, before being locked in place with the ratcheting lever clamp.

Clean Installation
The Riser comes in three distinct parts: left, middle and right. Each is labelled to avoid confusion and ensure correct directional placement. All three mount via M4 screws, meaning it just takes a standard 3mm Hex Key to install.

Canon-Compatible
For Canon shooters wanting the versatility of DJI gimbals, this Riser is the ideal solution. It is compatible with a range of Canon cinema cameras such as the C70, C80, C200, C300 Mk III, C400, C500 Mk II and C700. This bridges the gap between your Canon camera, DJI gimbals and our LeftField Mini Baseplate: creating a consistent and convenient rigging setup.

Quick-Release
Once installed, you can just as easily uninstall your DJI dovetail. The orange easy-press safety linking the right and middle parts of the Riser help keep the dovetail in place when you need it, but give you an easily-accessed quick-release button.

Features
• DJI Dovetail Design - The Riser sets cameras to the correct height for use with DJI RS dovetails
• Modular Design - The Riser comes in three parts that install cleanly
• Canon Compatible - The Riser works with a range of Canon cinema cameras
• Safety Button - An easy-press safety allows you to quickly release the DJI dovetail
• Built for LeftField Mini - The Riser mounts securely to the LeftField Mini Baseplate