Bright Tangerine LeftField 3 19mm Studio Quick Release Bridgeplate Advanced Kit

Set up and balance your camera with 19mm rod support with the LeftField 3 19mm Studio Bridgeplate - Advanced Kit.

This kit includes the LeftField 3 19mm Studio Bridgeplate, Studio Adapter Dovetail, LeftField 3 ARRI Standard Dovetail (12") & a pair of 19mm Drumstix in 12" (30.4cm) lengths.

Get a balanced and stable camera setup with the LeftField 3 19mm Studio Bridgeplate, designed to attach directly onto an ARRI standard dovetail. The Sterling Titanium Drumstix provide a rigid foundation to support accessories like matte boxes, follow focus and lens supports.

Vertical Lift Off
Feel secure with our patented Open UP quick release system, providing the confidence that your camera will remain safely and securely locked off, with no danger of it slipping or falling off.

The lever has three positions - locked, slide & release. When the lever is in its rearmost position, the bridgeplate locks firmly into place.

Position the lever to the midpoint, allowing you to shift your bridgeplate along the balance plate with ease. To release the camera, press the safety eject button on the lever and adjust the lever to its forward position.

Easily Balance Your Camera
Improve your work efficiency and accuracy with laser-engraved position indicators in both metric & imperial units. Whether you're an AC or a Steadicam operator, you will be more prepared to make lens changes, knowing exactly where to position your camera for optimal balance.

The dovetail features both front & rear push-button safety releases. With accessories like lens motors that hang below the level of the baseplate, an easy backward slide provides an easy way to slide off your dovetail without disruption.

LeftField 3 & ARRI Compatible
The LeftField 3 19mm Studio Bridgeplate has been designed to accommodate industry-standard ARRI heights and offsets. It works directly with ARRI cameras, & PCA accessories and is also compatible with the LeftField 3 15mm LWS Baseplate (B4003.1034) using the included LeftField 3 Studio Dovetail Adapter (B4003.1031).

The dovetail is compatible with any ARRI standard clamp, and also be mounted directly to O'Connor 2600/2575D/120EX as well as the Sachtler Cine 30 fluid heads.

Bridgeplate Accessory Mounting
The bridgeplate offers a secure and sturdy foundation for mounting accessories on 19mm rods, including lens supports, focus motors, matte boxes, hand grips and more. When you pair our Drumstix rods with the bridgeplate, you'll get a combination of strength and lightweight performance that can't be beaten.

The right side features an ARRI standard rosette and the rear has mounting points for the LeftField 3 KASBAH Shoulder Pad.

Standard & Super 35 Support
The inner plate can be set for Standard & Super 35 compatibility on ARRI cameras and accessories. It includes 3/8"-16 threaded studs and locating pins for mounting on your camera for perfect alignment.

British Workmanship
Bright Tangerine offers the best camera accessories for filmmakers looking for premium quality. Every component is designed with filmmakers in mind and tested to the highest standards; ensuring maximized compatibility and usefulness on every set.

- LeftField 3 19mm Studio QR Bridgeplate -
Get a balanced and stable camera setup with the LeftField 3 19mm Studio Bridgeplate, designed to attach directly onto an ARRI standard dovetail. Adding rigid support for accessories with 19mm rods.

Our patented Open UP quick release system allows you to effortlessly transition between setups with a simple vertical lift off.

- Drumstix 19mm Sterling Titanium Support Rod, 12", Pair -
Drumstix Sterling Titanium Support Rods combine featherweight mass with herculean strength. Be dexterous. Be agile. Be free. We let you focus on what's important, so you never miss a beat.

19mm support rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, our Drumstix' titanium resilience will support your needs without restrictions. Welcome, to the new standard of operation.

As filmmakers, we understand that you take your set-up seriously and is as unique as you are. We think support rods shouldn't be considered consumables. It's a hassle to deal with, damaging for our environment, but most importantly - it doesn't have to be that way anymore.

The Meta has shifted.

Steady, Sturdy, And British
Our R&D team has tried, tested and developed a new formula to manufacture what we have now come to call Sterling Titanium - the metal we are using for our Drumstix. That makes them both the strongest and lightest support rod available.

Let's Get Something Straight
Compared to carbon, aluminum and steel bars, our Drumstix' offer a superior strength to weight ratio. Now, there is no need to compromise your shot for the sake of saving weight or limitations of the gear.

By removing weight you remove burdens. Become more agile than ever, go handheld more often for organic movement for longer shots and travel to further distances than before.

With your support rods being lighter than ever you can capitalize on more gear that would otherwise be too physically demanding. Either way, you can capture what wasn't possible before using Drumstix' innovation.

Drumstix' lightens your carry on weight when travelling or filming. That means easier flying, or another lenses, a steadier shot, or an extra hour of endurance. Ultimately, this is up to you.

Our thin wall design makes the Drumstix' 30% lighter than aluminum. So, if you're using drones for aerial cinematography, you know that ever gram can add crucial flight time. For gimbals, the sky's the limit with how you can use this to your advantage.

But the magic of losing a few pounds doesn't end there. Every bit of excess weight shed increases flight time whether it's a long day on set, hiking through treacherous conditions, or navigating the world of extreme sports. The reduction of weight from Drumstix' can help shift the center of gravity so that you have more core control of your equipment. Overall, a reduction of weight can make a huge difference.

As strong as steel
Our technology won't shatter like carbon, nor will it lose its structural integrity. It won't crush like aluminum when being clamped. And if you hadn't guessed, Drumstix are built to last a lifetime.

The ideation behind Drumstix was more than alleviating weight from your rig; it takes weight off your shoulders. From summer thunderstorms to a long day in a remote desert - Drumstix will stay intact so can focus on the challenges ahead.

Drumstix are set to change industry standards not only for the camera operator, but also for rental companies. A lifetime guarantee means less returns, reducing your consumables costs, and reducing unnecessary waste.

Made Great in Britain
We manufacture in the United Kingdom. Drumstix' are a domestic product made here in house by our own manufacturers. We're proud of that.

Our innovators, designers, and manufacturers in Farnham make every set of Drumstix with two microns of tolerance which will stay straight on even the longest 18" rod. Experience the smoothness of British manufacturing with no bumps, dents and ever-so-slight mismatch which make Drumstix, the quintessential support rod.

- LeftField 3 ARRI Standard Dovetails -
Streamline your camera setups with the LeftField 3 ARRI Standard Dovetail. Featuring a strong, lightweight design and 12" of travel for perfect balance. This dovetail has built-in 3/8"-16 & 1/4"-20 threads reinforced with helicoils for mounting on a tripod or quick release plate.

Equip your camera setups for seamless transitions between setups with the LeftField 3 ARRI Standard Dovetail with 12" of travel for easy balancing.

It provides an easy-to-mount platform that is lightweight yet robust, featuring a solid aluminum construction with weight-saving cutouts. The dovetail is available in 12" length.

Metric & Imperial Position Indicators
Improve your work efficiency and accuracy with laser-engraved position indicators in both metric & imperial units. Whether you're an AC or a Steadicam operator, you will be more prepared to make lens changes, knowing exactly where to position your camera for optimal balance.

Helicoil Reinforced Threads
Easily mount your dovetail onto a tripod quick release plate or other support with confidence, knowing each point is reinforced with helicoils to help avoid any stripping of the 3/8"-16 & 1/4"-20 threads.

LeftField 3 & ARRI Standard Compatible
Streamline your filmmaking experience with the Open UP system on the LeftField 3 15mm LWS Baseplate or 15/19mm Studio Bridgeplates, allowing you to simply lift off the camera from the dovetail.

The dovetail is compatible with any ARRI standard clamp, and also be mounted directly to O'Connor 2600/2575D/120EX as well as the Sachtler Cine 30 fluid heads. This dovetail has been updated to LeftField 3 and is not compatible with LeftField 2 accessories.

- LeftField 3 Studio/ARRI BP-8/BP-9 Adapter Dovetail -
Quick release on & off the ARRI BP-8 or BP-9 Studio Bridge Plates when using the LeftField 15mm LWS Baseplate for Sony VENICE 1 & 2.The dovetail plate lines up to the mounting screws & locating pins for a reliable & secure mount.

This dovetail is designed to match the mounting screws on the ARRI BP-8 & BP-9 Studio Bridge Plates, setting the camera at the correct heights & offsets for 15mm Studio & 19mm Studio configurations.