Bright Tangerine LeftField 3 Quick Release Baseplate for Sony FS7 and FX9 Camera

Add 15mm rod support for accessories with an ARRI dovetail standard quick release base. This kit is compatible with the Sony FX9 & FS7 (I & II) cameras.

The LeftField 3 Sony FX9 QR Baseplate provides 15mm rod support for accessories with an ARRI dovetail standard quick release base.

Unique Open Up Quick-release System
The Baseplate kit features our patented Open Up Quick-Release system, which lets you slide, lock & vertically release the camera from any ARRI standard balance plate or the included low profile dovetail plate.

Compatibility
This kit is compatible for the Sony FX9, FS7 I & FS7 II cameras.

LeftField 3 System
Customize your camera build with the extensive selection of accessories in the LeftField system. Letting you create the right setup for each and every task.

This kit has been updated to LeftField 3 and is not compatible with LeftField 2 accessories.

No Compromises
Designed to last, the baseplate is machined from a single block of aluminum to handle the most extreme environments.


- LeftField 3 15mm LWS QR Baseplate Core -
Upgrade your production with the LeftField 3 15mm LWS Quick Release Baseplate Core, streamlining your filming workflow and helping you accomplish more in less time.

Add a riser for your compatible camera and securely lock onto any ARRI standard balance plate or dovetail.

With support for 15mm rod support, you can outfit your camera for any cinematic challenge.

Vertical Lift Off
Feel secure with our patented Open Up quick release system, providing the confidence that your camera will remain safely and securely locked off, with no danger of it slipping or falling off.

The lever has three positions - locked, slide & release
• When the lever is in its rearmost position, the bridgeplate locks firmly into place
• Position the lever to the midpoint, allowing you to shift your bridgeplate along the balance plate with ease
• To release the camera, press the safety eject button on the lever and adjust the lever to its forward position

Accessory Mounting
The baseplate offers a secure and sturdy foundation for mounting accessories on 15mm rods, including lens supports, focus motors, matte boxes, hand grips and more. When you pair our Drumstix rods with the bridgeplate, you'll get a combination of strength and lightweight performance that can't be beaten.

The sides feature mounting points for compatible side plates and the rear has mounting points for the LeftField 3 KASBAH Shoulder Pad.

British Workmanship
Bright Tangerine offers the best camera accessories for filmmakers looking for premium quality. Every component is designed with filmmakers in mind and tested to the highest standards; ensuring maximized compatibility and usefulness on every set.

Features
• Compatible with multiple camera systems using LeftField risers, setting correct 15mm LWS height and spacing
• Safe and reliable Open UP quick release system
• Compatible with LeftField 3 & ARRI standard balance plates
• Compatible with KASBAH shoulder pad
• Mounts onto any ARRI standard bottom plate & LeftField 3 balance plates

- LeftField Dovetail Plate -
The Left Field ARRI Dovetail Plate is a quick release cheese plate that is compatible with the Left Field 15mm LWS Baseplate and Sliding Top Plates.

The LeftField ARRI Dovetail Plate is a multipurpose quick release plate featuring multiple 1/4", 3/8" & ARRI Accessory Mounts.

The low profile plate is based on the ARRI standard dovetail and acts as a quick release plate for a camera setup using the LeftField 15mm LWS Baseplate making the transition going from tripod to handheld much quicker.

When used with the LeftField Sliding Top Plates, the Dovetail plate provides a mounting surface for other accessories like the carrying handle and Titan Arm quick release brackets.

Two removable safety screws prevent the plate from sliding out of the receiving accessory. These two screws can also be mounted on the right side of the plate to fix the dovetail plate into position.

The LeftField ARRI Dovetail Plate can also snap in and out by releasing the Dovetail clamp further. This is especially handy if you have other accessories mounted onto your camera setup which can obstruct the camera package from sliding on and off the plate.

Features
• Versatile quick release plate for camera or top mounted accessories
• Ability for fine adjustment of counter balance
• Multiple 1/4", 3/8" & ARRI Accessory Mounts
• Removable safety screws to prevent sliding out
• Option to place the Dovetail Plate into fixed position with safety screws

- Sony FS7/FX9 Riser -
Set the Sony FS7 (I & II) & FX9 to the correct height when using the Left Field 15mm LWS Baseplate.

This Riser block mounts to the Left Field 15mm LWS Baseplate core and sets the Sony FS7 (I & II) & FX9 to the correct height for use with 15mm LWS rods.

The riser block features a slotted design with captive screws allowing the camera to be removed from the baseplate quickly if required.

The interchangeable riser block connects to the Left Field 15mm LWS Baseplate Core using six screws.

Features
• Sets camera at correct optical height for the 15mm LWS rod standard
• Compatible with the Sony FS7 & FX9
• Interchangeable to configure baseplate for other cameras