Bright Tangerine LeftField 3 Expert Kit for Sony VENICE 1 and 2 Camera

Prepare your Sony VENICE 2 for any task with a complete accessory package that doesn't compromise on anything. The rigid cage forms a steady foundation for rigging and mounting accessories.

Each expert kit comes with the sliding top plate, side plates, split riser 15mm LWS baseplate, D-Style Master Handle, Axl EVF mount, a pair of 4" & 12" Drumstix 15mm rods, ARRI 300mm balance plate and a 19mm 3/8" Anti-Twist rod mount.

The LeftField System for the Sony VENICE 2 has been built to reliably deliver time after time. The cage provides an extremely rigid frame for rigging with helicoil reinforced mounting points, rosettes for handles & 15mm rod support for EVFs and focus motors.

Time on set is critical, each part of the system has been designed to allow ACs and operators to move faster with quick release dovetails which can be preconfigured during prep.

Multiple safety mechanisms have been integrated removing any chance of failure & accidents on set.

Zero Compromises
Every part of the LeftField System is machined from single aluminum-alloy billets to create extremely rigid and light weight components. All of which play perfectly to the strengths of the Sony VENICE 2.

Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support, and your LeftField Sony VENICE 2 System becomes the most reliable and hard-working partnership that any filmmaker could wish for.

- 15mm LWS Baseplate Core -
Add a quick-release base with support for 15mm rods with the 15mm LWS Baseplate for Sony VENICE 1 & 2. Using the patented Open UP Quick Release System, you can quickly change from handheld shooting to tripod in seconds.

Reliably mount to any ARRI standard dovetail or dovetail plate with a vertical release.

This 15mm LWS Baseplate Core is designed for use with the Sony VENICE 1 & 2 in combination with B4004.1024 Split Riser or B4004.1001 Standard Riser.

It sets the Sony VENICE 1 & 2 to the correct height for 15mm LWS setups with a quick-release base compatible with any ARRI standard dovetails or B4003.1008 LeftField dovetail plate.

Unique Open Up Quick-Release System
The baseplate features our patented Open UP Quick-Release system that lets you slide, lock & vertically release the camera from any ARRI standard balance plate, or B4003.1008 LeftField low profile dovetail plate.

Multiple safety mechanisms prevent any accidental releases, adding extra piece of mind when handling large camera builds.

Accessory Mounting
The baseplate has front & rear 15mm LWS rod mounts. The rear also features mounting points for use with the KASBAH Shoulder Pad.

To set the camera up for 15mm/19mm Studio, the B4003.1031 BP-8/BP-9 Adapter can be used for compatibility with ARRI BP-8 & BP-9 Studio Bridgeplates. The baseplate is not compatible with B4003.1013 & B4003.1014 LeftField Studio QR Bridgeplates.

Extra Care Comes Standard
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodized for extended durability. The 15mm LWS Baseplate for Sony VENICE 1 & 2 comes with our famous Bright Tangerine Support.

- Split Riser -
This riser comprises of two parts and sets the Sony VENICE 1 & 2 to 15mm LWS standards when combined with B4003.1034 15mm LWS Baseplate.

The split design allows the cage to quickly detach from the baseplate, creating a low profile design for easier balancing on gimbals & steadicam without complete disassembly.

This riser is a two-part design consisting of the upper & riser plates. It combines with B4003.1034 15mm LWS Baseplate Core.

The upper plate attaches directly to the bottom of the camera and the riser plate mounts to the baseplate core. The camera with the upper plate can then be secured to the baseplate. The fore/aft positioning of the camera can be adjusted for optimal balance before engaging the locating pins to ensure proper alignment.

Gimbal Ready
For gimbal & steadicam work, the camera can be quickly detached from the baseplate providing a low profile form factor, ready to be connected to dovetails and other quick release plates with a stable 75mm wide base By removing the baseplate, it lowers the center of gravity and reduces the overall weight of the build.

The upper plate also provides mounting points for B4004.1021 & B4004.1022 Side Plates. Combined with B4004 1020 Sliding Top Plate, they form a rigid cage around the camera.

- Sliding Top Plate -
The Top Plate for Sony VENICE 1 & 2 provides a sliding, quick-release platform for interchangeable dovetails, providing multiple support & accessory mounting options. Pre-configured dovetails can be set up for top handles, gimbal mounts & more.

The front features 15mm LWS rod support for EVFs & lens motors.

This Top Plate is designed for the Sony VENICE 1 & 2 and provides a sliding, quick-release platform for interchangeable dovetails. The dovetails can slide fore/aft for optimal balance.

Additional dovetails (B4002.1070) can be pre-configured with top handles, gimbal top mounts & more, speeding up setup changes.

Safe & Reliable
The top plate features multiple safety mechanisms for added peace of mind. The dovetails are secured in place using a 4mm hex key, removing any levers which could get knocked while filming. A dead lock screw can also be engaged, fixing the dovetail in place for a completely rigid top plate.

To remove the dovetail, the orange safety must be pressed before the clamp can be opened allowing for the dovetail to be removed. The ARRI standard clamp can also be used for underslung setups using the dovetail or balance plates.

Accessory Mounting
The top plate also features multiple 1/4"-20 and anti-twist 3/8"-16 threads for accessories, with fixing points for the side plates on each side.

The vertical position of the front 15mm LWS rod support can be adjusted to 15mm LWS or low mode for use with EVF mounts & lens motors.

Extra Care Comes Standard
Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodized for extended durability.

- D-Style Master Handle -
Compact yet comfortable, the D-Style Master Handle is the perfect lightweight top handle for your camera rig. Featuring a non-slip rubber texture and a contoured grip, the handle is ergonomically designed to be easy to hold but hard to drop.

Featuring ARRI Pin-Lock standard threads and QD sockets for accessory mounting, the D-Style Master Handle is a versatile addition to your camera setup.

The D-Style Master Handle is not just an accessory, it's the extension of a filmmaker's creative arm. Designed with a no-compromise approach to comfort and control, this top hand pairs extreme comfort with extreme compatibility. Made from anodized aluminum with a contoured rubber grip, the D-Style Master Handle will literally become your daily carry.


- Drumstix 15mm Titanium Support Rods -
Drumstix Sterling Titanium Support Rods are like no other rods. With featherweight mass, and rock solid support, they will change the way you film. Be dextrous. Be agile. Be free. We let you focus on what's important, so you never miss a beat.

15mm Support Rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, our Drumstix' titanium resilience will support your needs without restrictions. Welcome, to the new standard of operation.

As filmmakers, we understand that you take your set-up seriously and is as unique as you are. We think support rods shouldn't be considered consumables. It's a hassle to deal with, damaging for our environment, but most importantly - it doesn't have to be that way anymore.

- LeftField 3 ARRI Standard Dovetails -
Streamline your camera setups with the LeftField 3 ARRI Standard Dovetail. Featuring a strong, lightweight design and 12" of travel for perfect balance. This dovetail has built-in 3/8"-16 & 1/4"-20 threads reinforced with helicoils for mounting on a tripod or quick release plate.

Equip your camera setups for seamless transitions between setups with the LeftField 3 ARRI Standard Dovetail with 12" of travel for easy balancing.

It provides an easy-to-mount platform that is lightweight yet robust, featuring a solid aluminum construction with weight-saving cutouts. The dovetail is available in 12" length.

Metric & Imperial Position Indicators
Improve your work efficiency and accuracy with laser-engraved position indicators in both metric & imperial units. Whether you're an AC or a Steadicam operator, you will be more prepared to make lens changes, knowing exactly where to position your camera for optimal balance.

Safety Releases
The dovetail features both front & rear push-button safety releases. With accessories like lens motors that hang below the level of the baseplate, an easy backward slide provides an easy way to slide off your dovetail without disruption.

Helicoil Reinforced Threads
Easily mount your dovetail onto a tripod quick release plate or other support with confidence, knowing each point is reinforced with helicoils to help avoid any stripping of the 3/8"-16 & 1/4"-20 threads.