Bright Tangerine Axl EVF Mount Base Kit for Blackmagic Design URSA Cine Camera

Our bestselling Axl EVF Mount system comes to the Blackmagic URSA Cine: offering triple-axis control for your camera's viewfinder. This unique system acts as a secure, sag-free alternative to the stock URSA Cine EVF: ideal for complex setups. Coming with everything you need to set up your URSA Cine for shooting, the Axl EVF Mount is ideal for filmmakers of any skill level.

Drop the downtime with our Axl EVF Mount Kit for the Blackmagic URSA Cine - replacing the stock URSA Cine EVF. Using a 3-axis adjustment system, you can smoothly adjust the position of your viewfinder - even one-handed. The unique mechanism ensures your EVF is always kept steady, and you can adjust the positioning without the fear of the Axl dropping or sagging. Using the same rod-mounting setup as the URSA Cine's viewfinder, but swapping the horizontal 19mm rod for our Axl mechanism, the Axl EVF Mount is the perfect addition to your Blackmagic build.

Single-Handed Shooting
Every element of the Axl has been designed to increase versatility and decrease downtime: the Axl EVF Mount Kit uses a 3-axis tightening system, which allows you to quickly and easily adjust the viewfinder's position - even with one hand. The Axl is designed so that even when completely loosened, your EVF won't sag or drop down.

Perfect for the PYXIS Cine
With our dedicated Adapter for the stock Blackmagic URSA Cine EVF, you can easily enhance your viewfinder with quick-release convenience. This makes it easier not only to fine-tune your EVF, but also pack down your setup when you finally wrap shooting.

Convenient Mounting
The Base Kit of the Axl EVF Mount comes with two 4" support rods from our sterling titanium Drumstix range. Featherweight yet strong, they are the best way to mount the EVF to a top bar bracket, with the EVF mount being set to the 15mm LWS spacing - ideal for pairing with our 15mm Rod Console for the URSA Cine. For adjusting on the camera, you can loosen and tighten the rod brackets.

Built to Last
Like all Bright Tangerine products, the Axl EVF Mount is built with sustainability and longevity in mind. Components are made from anodized aluminum: providing a great balance of low weight and high durability. The Axl is a lightweight addition to your camera, and can withstand all the wear and tear of set life.

Part of the Axl EVF Mount System
For seamlessly adjusting your viewfinder on set, check out the Axl EVF Mount system: designed to be compatible with a huge range of camera systems. Lightweight and customizable, the Axl is the ultimate choice for solo shooters or entire camera teams alike.

Compatibility
The Axl EVF Mount Base Kit is designed to adapt the Blackmagic URSA CINE's viewfinder. The Axl system has broader compatibility with other viewfinders, but will require dedicated adapters for each camera system and their EVFs.

- Axl EVF Adapter -
The Axl EVF Adapter for Blackmagic URSA Cine allows you to attach the stock Blackmagic viewfinder to our adjustable Axl EVF Mount. With quick-release functionality built-in, this gives you full freedom of positioning. Made from durable anodized aluminum, the EVF Adapter is the perfect addition to your camera bag.

The Axl EVF Adapter for Blackmagic URSA Cine gives you the HD quality of the stock Blackmagic viewfinder with the full freedom of our Axl EVF Mount system. Seamlessly attaching to both, the Adapter gives you quick-release functionality for fine-tuning your visual display. Made from aerospace-grade aluminum, the EVF Adapter is both lightweight and durable.

Axl Convenience
The Axl EVF Mount offers three-axis articulation for your EVF, meaning you can monitor your shot no matter the angle. The EVF Adapter quickly and securely mounts to the Axl, for effortless setup when you first arrive on location.

Designed for the Blackmagic URSA Cine
The Axl EVF Adapter replaces the mount on the Blackmagic URSA Cine EVF, meaning that you don't have to throw away your Axl when upgrading your setup. Taking moments to install, you can repurpose your Axl for Blackmagic camera systems in moment - simply set it and forget it.

Built to Last
The Axl EVF Adapter is designed to withstand the worst that your sets can throw at it. Made of hard-anodized aluminum, the low-profile Adapter is durable enough for rough wear-and-tear, but also light enough to go near-unnoticed on your rig.

Compatibility
The Axl EVF Adapter for Blackmagic URSA Cine is compatible with the Blackmagic URSA Cine EVF, which can be used with the Blackmagic URSA Cine or Blackmagic PYXIS 6K cameras. In order to use correctly, you will need the base Axl EVF Mount.

Features
• Blackmagic URSA Compatible - The EVF Adapter bridges the gap between the stock Blackmagic URSA Cine EVF and our Axl EVF Mount
• Quick-Release Functionality - The Axl system allows for quick adjustments and release for fine-tuning your display
• Built to Last - The EVF Adapter is made from aerospace-grade aluminum for wear and corrosion resistance

- Axl EVF Mount -
Save time adjusting your EVF position with the Axl EVF mount. The single locking screw gives you fast and easy adjustment of your EVF with one hand.

This Axl EVF mount is compatible with the ARRI MVF-1, MVF-2, EVF-1 & EVF-2 and provides an alternative mount to the ARRI MVB-1. The Axl has been designed and built in the UK to meet the demands of professional filmmakers. It not only keeps your EVF safer and more secure, but it's also designed to eliminate all the frustration of fiddling and fumbling with multiple screws and knobs, which can take up valuable time on your shoot.

The 3-Axis tightening system on the Axl mount, allows you to easily position your EVF using one, single knurled thumbscrew. While the Drop-free design of Axl won't allow your EVF or monitor to flop down, even when completely loosened. The rotation is fluid, while limiters on the tilt adjustment keep the orange highlighted tightening screw, always visible and always accessible.

Designed and built in UK using high-grade aluminum, which we then anodized for more durability. It's a lightweight, compact design that enables you to create a beautifully clutter-free camera build. The addition of a quick-release bracket offers you rapid set-up and break-down of your chosen camera rigs.

Compatible with a wide range of adapters for the latest EVF's and Monitors. Built here, at home, in our own factory in Fleet. This allows us to constantly update the range of standard adapters and even create custom adapters. It's a heavy decision, choosing which professional, high-quality EVF to invest in. There's no better way to protect it, than pairing it with the Axl EVF Mount.

Features
• The 3-Axis knurled locking screw gives you fast and easy adjustment of your EVF with one hand
• The Drop-free design of the Axl won't allow your EVF to flop down, even when completely loosened
• Integrated rotation limiters on the tilt adjustment, keep the tightening screw always accessible
• Use your Axl with a wide range of EVF's by adding more adapters to your kit
• Built with high-grade aluminum & anodized for durability
• A minimal and compact design for clutter-free camera builds

- 4" 15mm Drumstix Support Rod -
Drumstix Sterling Titanium Support Rods are like no other rods. With featherweight mass, and rock solid support, they will change the way you film. Be dextrous. Be agile. Be free. We let you focus on what's important, so you never miss a beat.

15mm Support Rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, our Drumstix' titanium resilience will support your needs without restrictions. Welcome, to the new standard of operation.

As filmmakers, we understand that you take your set-up seriously and is as unique as you are. We think support rods shouldn't be considered consumables. It's a hassle to deal with, damaging for our environment, but most importantly - it doesn't have to be that way anymore. The Meta has shifted.

Steady, Sturdy, And British
Our R&D team has tried, tested and developed a new formula to manufacture Sterling Titanium - the metal we are using for our Drumstix. That makes them both the strongest and lightest support rod available.

Features
• Quarter of the weight of stainless steel rods
• Won't bend like aluminum or shatter like carbon fiber rods
• Manufactured to high British standards with twenty microns of tolerance