Bright Tangerine Prodigy Air Deflector Base Kit

The Prodigy Air Deflector is our flagship lens cleaning solution: blasting air at over 300mph onto a clear glass surface to clear it of moisture, dust or other particles. The Base Kit includes the Prodigy Air Head, Compressor, Hose, Power Cable, Top Flag and two 4" x 5.65" Filter Trays.

Fully compatible with our Frame Safe Clamp Adapters for a clean frame, the Prodigy Air Deflector is the go-to choice of professional camera teams.

The future is here: introducing the Prodigy Air Deflector, our flagship lens cleaning solution. Unlike spinners and other rain deflectors, the Prodigy uses compressed air blasted at over 300mph to keep your optics clear of interference. The time it takes to clear your frame is measured in seconds: able to clear dirt, snow, rain and any other debris from the front of your lens.

Built on the Misfit Kick framework, the Prodigy Air Deflector allows you to protect your lens without sacrificing filter placement or adding central dead spots.

The Ultimate Lens Cleaning Solution
The Prodigy Air Deflector feeds compressed air through a tube to the air head, blasting it at over 300mph to clean your lens of particles. There are no dead zones: every millimeter is equally clear.

Spotless in Seconds
Want to keep something out of your shot? Simply engage the Prodigy Air Deflector and watch as anything on the glass is blown away - literally. The glass is also optically clear with a superhydrophobic coating, meaning that is has no effect on the visuals of your shot.

Built on the Misfit Kick
Before the Prodigy, shooters had to choose between a clean shot and a stylish shot. Not anymore: the Prodigy is built on the frame of our Misfit Kick matte box. This means you can add up to three filters behind the air deflector to modify your exposure; so your shot is crisp and clean and free of vignetting - simply attach one of our Frame Safe Clamp Adapters.

Lightweight
The Prodigy Air Deflector is also notably lightweight, meaning that it can be mounted in clip-on or rod-mounted setups for added convenience, without the risk of damaging your camera rig. What's more, the compressor - the heavier component which helps feed compressed air to the air head - can be mounted at a distance, allowing you to better balance your camera setup.

Built for Rigging
Customize without compromise with the Prodigy Air Deflector: along with the compressor being repositionable, you can easily add on top of it with a variety of rigging possibilities. It features helicoil-reinforced threads to connect clamps and brackets. For added stunt security, attach a safety line using the tether points on the Air Head and Compressor.

Durable
That low weight is thanks to the Prodigy's build made of carbon fiber, high-grade aluminum and stainless steel: all of which make it perfect for rugged rigs. The Prodigy is IP66 rated, meaning that it is not only completely dust-proof, but it can withstand powerful water jets without a problem - the only ratings that are higher are reserved for total submersion. Though the Prodigy can't be immersed fully underwater, it is rust-proof and corrosion-resistant, and reliable in the hottest or coldest of conditions.

Power & Protection
The Prodigy is powered by an industry-standard 24V 2-pin LEMO input with built-in automatic polarity switching. The power input allows for a voltage range of 21-33V, ensuring reliability and adaptability and helps prevent issues. In situations where the voltage goes outside of the recommended range, your power warning symbol will illuminate. An amber light will signal if it drops below 21V or exceeds 33V, or red if the voltage goes below 19V or above 35V (the Prodigy will shut off).

User-Friendly
The Prodigy is also intuitive to use for professional ACs and newcomers alike, with clear and well-lit buttons and status lights. Built-in error detection means it is easy to troubleshoot issues and get back to shooting. An industry-standard 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.

Compatibility
The Prodigy can be mounted via support rods or onto any standard lens, using our Frame Safe Clamp Adapters. Once mounted, it is able to fit 4" x 5.65" filters with ease.

Zero Compromises
Designed with filmmakers in mind, Bright Tangerine caters to the global film industry from our UK base. Engineered to be practical solutions to filmmaking problems, every product is tested to maximize use on-set; and they are the favorites of leading filmmakers across cinema, television and content creation. Our customer service team is on-hand to help advise on any purchase, and ensure that you have the best possible experience with Bright Tangerine.

- Compressor -
The Compressor is the engine of the Prodigy Air Deflector. It filters and compresses the air, accelerating it to 300+ mph. Powered by 24V (2-pin Lemo), with R/S connectivity (3-pin Fischer).

The Prodigy Air Deflector Compressor filters and compresses air, accelerating it to 300+ mph through the connected hose to the Air Head. It is extremely durable, rugged, and waterproof, and can endure any harsh conditions in either hot or cold climates.

Built for Professionals
The Compressor can be placed up to (20") 50cm away from the Air Head and has a variety of rigging possibilities. When in high risk situations, connect a safety wire to the tether point for added peace of mind.

Powered by industry-standard 24V for high efficiency and ability to use larger batteries for longer run times. The 2-pin LEMO port has built-in automatic polarity switching to prevent any short circuits and potential damage.

The 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.

User-Friendly
The large buttons on the control panel are easy to operate with gloves on, and future firmware updates can be done by the user using the Type-C USB port. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection.

The air filter is a drop-in replacement with no special tools required that can be done in the field.


- Air Head -
The Prodigy Air Head directs airflow from the compressor to clear the lens, deflecting water, dust and debris. The special piece of glass is impact resistant, treated with a superhydrophobic coating to repel water and particles. Replacing the glass only takes a few minutes and requires no special tools.

It accepts up to 3 filter trays and can be set up as clip on or rod mounted. Detach the hose to use it as a standalone matte box with a large field of view. Flat surfaces make it easy to bag the camera for protection with an optional top flag available. (Top Flag not included).

The Prodigy Air Head takes pressurized air from the Compressor through the connected hose and creates barrier over a specially treated piece of glass for a clear lens.

With advanced processes, we can make a glass that is optically clear with no effect on image quality or exposure, and it has excellent impact resistance. Any water or liquid on the surface slides off and doesn't bead up after being treated with a superhydrophobic coating. Spare glass is accessible if it gets damaged or breaks, and replacing it takes only a few minutes.

Built On The Misfit Kick
The Air Head can also be used as a standalone matte box. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It's light enough to use in a clip on configuration or with rod supports on a 15mm LWS or 15/19 Studio setup.

Compared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed from high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates.

- Air Hose -
A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements. The hose is 50cm (20") in length and features secure bayonet fittings on each end.

Quick Release Connectors
Attaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow.

- Carbon Fiber Top Flag -
Get extra protection from the elements and maintain contrast in your image with the Prodigy Top Flag. Quick & easy to install, with no tools required. The thumbscrew lets you set the tension so it stays securely in place or can be adjusted on the go. The flag is made from carbon fiber, making it lightweight and durable.

The Prodigy Top Flag is a great way to protect your frame from the elements and maintain contrast by blocking out flares. No tools are required, so you can install it quickly on the go.

The flag provides additional protection for your Prodigy glass, with its 165 degree range of movement. It can close flush for transport and open up to block out flares and provide coverage from rain.

- Filter Tray -
The 4x5.65" Filter Tray provides a frame to enable you to mount a filter into the Misfit Kick. It features a spring-loaded locking mechanism to securely hold the filter in place. This locking mechanism can be swapped out with the Gripper Module, providing better handling and faster filter changes.