Burris Optics 2-7x32 Scout Riflescope, Matte Black Finish with 2nd Focal Plane Ballistic Plex Reticle, 1" Tube

2024-02-15T19:00:00

Excellent on a Ruger GSR. Mounted to a poly stock Ruger GSR in weaver Medium quad lock rings. Clear glass and does exactly what I need to. Thanks Burris for keeping scout scopes alive

Matt84

Originally posted at

2023-06-17T20:00:00

Have had this scope for a while now. Never thought I'd own a Burris product, but here ya go. This little scope is awesome. Highly recommend. It's not a Schmidt & Bender, but for my Scout rifle, this little thing is top shelf.

EThree

Originally posted at

2023-02-23T19:00:00

Only 80 rounds of 7.62x54 R in, but I'm pretty impressed. The package is a pretty unbelievable balance of compromises for the price. The most obvious Leupold competitor might be only just slightly more clear but sacrifices some FOV, magnification range and focus adjustment for it. Up to the user to decide which is better for them. I'll take the Burris. For my mileage, shooting both eyes open at closer ranges but closing the non dominant eye at higher ranges or magnification the increased FOV is appreciated. The reticle is also a great advantage. While I normally only go for plex, MoA or mil dots on 2fp, the ballistic Plex is pretty perfect on m44 Mosin with 7 power giving you near as makes no difference 100, 200, 300, 400, and 500m; while 2 power is close enough to 100, 300, 600, 800 and 1000m. Finally on the plus side is durability. This thing does not mind at all getting bashed around a bit on my truck gun. My only 2 minor gripes are I could do with an inch less eye relief, and setting the focus is finicky to the point where it took longer to get perfect than the scope did to mount, boresight and zero.

BrianGford

Originally posted at

2022-11-17T19:00:00

This was learning process, having never used a scout scope before, setup was a little different. Once I had achieved proper level and mount height I was able to bring it into zero pretty easy. Eye relief is generous in that you have several inches to adjust for you and your rifle. Acquisition is quick and the reticles nice and bold. Other than sighting in with a dozen rounds I have not used it in the field, but so far I feel it will function as intended.

67BC

Originally posted at

2022-06-10T20:00:00

The ONLY scope to get for M1A SOCOM! Get the Burris low extreme tactical mounts and you?re set. Great eye relief. Clear, and holds zero really well. Not to mention that it just makes the SOCOM just ?pop?!!!

larryp58

Originally posted at

2022-01-29T19:00:00

This is a solid well built scope with perfect eye relief for the M1A Scout rifle. I'm a Leupold guy, but their VX Freedom 1.5x4 doesn't have enough eye relief to use all the magnification. This Burris 2x7 does. I have it mounted on Warne low height QD rings and it's about perfect with the factory stock for cheek weld. The adjustments are rock solid and repeatable. The glass is clear edge to edge and gives a great picture. This is the scope you want for the M1A Scout rifle.

Belleville S.

Originally posted at

2022-01-29T19:00:00

This is a solid well built scope with perfect eye relief for the M1A Scout rifle. I?m a Leupold guy, but their VX Freedom 1.5x4 doesn?t have enough eye relief to use all the magnification. This Burris 2x7 does. I have it mounted on Warne low height QD rings and it?s about perfect with the factory stock for cheek weld. The adjustments are rock solid and repeatable. The glass is clear edge to edge and gives a great picture. This is the scope you want for the M1A Scout rifle.

SteveK

Originally posted at

2019-11-24T19:00:00

Scope is robust if not a little on the heavy side. Very clear edge to edge with great range of eye relief. Power ring is quite stiff and needs an extension lever built into it or an aftermarket clamp on lever. (It will be really tough to turn in a hurry at winter 3-gun matches. Not sure how water proof this scope is with a non sealed power ring.

KeithC

Originally posted at

2019-10-29T20:00:00

Had this puppy a few months now and shot roughly 400 rounds through my Ruger Scout .308 with the Burris on top. No issues and great picture!

Yup12345

Originally posted at

2019-09-26T20:00:00

Scope was a great addition to my scout rifle. Easy to focus and sight in at the range. Quality is top notch! Highly recommend

bothfeetin

Originally posted at

2019-05-23T20:00:00

I took this scope to Africa, specifically the mountains of Eastern Cape and whilst stalking in on some baboons in the pre dawn rain, lightning and cold this scopes seal decided to fail on me. You can keep your lifetime warranty I don’t want a repeat of that. Your scope found a home in the bin, and a Leupold found its home on my gun. What was I thinking, that should have been my first choice. Silly me for choosing you. Never again Burris

goswasere

Originally posted at

2019-01-18T19:00:00

Purchased this scope recently, mounted it on top my Marlin 1895GBL with a WWG rail. Thing works like a dream and 2-7x is perfect for the effective range of the 45-70.

Tom H.

Originally posted at

2018-12-02T19:00:00

I bought this for a Marlin 1895 SBL in 45-70. Needed a scope that could handle hard recoil. It has excellent eye relief, I can shoot both eyes open. It’s my 3rd Burris. They aren’t as well known to some, but check them out. Note: would like scope covers

KarlH

Originally posted at

2018-11-17T19:00:00

I'm taking it to the deer woods for the 3rd season. I absolutely love this thing, took a little getting used to it being so far forward. Took my biggest buck the 1st year, it's a great combination. Worth the money!

Steve32566

Originally posted at

2018-10-16T20:00:00

Great for what I intended it for but really, $300 and cant include cheap rubber lens caps? Sometimes its the little things that separate reputable manufacturers!

Miket

Originally posted at

2018-08-25T20:00:00

I recently purchased and subsequently returned this scope because the reticle was canted inside the scope. To mount the scope with the reticle and it’s BDC in a vertical position the adjustment knobs are visibialy not in the vertical and horizontal planes. When zeroing the scope, this caused my adjustments to move the bullet strike diagonally. I believe this also interferes with the BDC. After zeroing at 300yds the 100yds impacts are over an inch to the right. I have since returned this to amazon and ordered a replacement. If the replacement is free of defects, and worth reviewing, I’ll update this post.

Chris 1.

Originally posted at