Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

CEDAR Audio SE 1 Portable 2-Channel Speech Enhancer with Case

SKU: CASE1

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

CEDAR Audio SE 1 Specifications

DSP
  • DSP

    Two linkable channels of CEDAR processing
    Floating point processor, 2.4 GFLOP/s, 40-bit resolution
    Sample rate: 44.1kHz

AD/DA conversion

Jump to...
  • AD/DA conversion

    24-bit linear PCM
    Sample rate 44.1kHz

Line Input

Jump to...
  • Connector

    RCA

  • Impedance

    >22k Ohm

  • Nominal signal level (0dB gain)

    -10dBV

  • Clipping level (0dB gain)

    +4dBV

  • Dynamic range (0dB gain)

    >100dB (AES17, A weighted)

  • THD+N (0dB gain)

    <0.01%

  • Maximum gain

    +20dB

  • Minimum gain

    -6dB

  • Max input level (-6dB gain)

    +10dBV

Digital Input

Jump to...
  • Connector

    RCA

  • Format

    SPDIF (IEC60958)

  • Sample rate sync. range

    40kHz - 50kHz

  • Maximum gain

    +6dB

  • Minimum gain

    -20dB

Line Output

Jump to...
  • Connector

    RCA

  • Nominal signal level

    -10dBV

  • Maximum output

    +4dBV

  • Dynamic range

    >100dB (AES17, A weighted)

  • THD+N

    <0.01%

  • Output impedance

    150 Ohm

  • Minimum load impedance

    2k Ohm

  • Short circuit protection

    Indefinite

Digital Output

Jump to...
  • Connector

    Unbalanced RCA

  • Format

    SPDIF (IEC60958)

  • Sample rate (internal sync)

    44.1kHz (+/-50ppm)

  • Sample rate (external sync)

    locked to SPDIF input

Headphone Output

Jump to...
  • Connector

    6.35mm stereo jack

  • Maximum output power

    90mW into 32 Ohm @ 1.7VRMS

  • Dynamic range

    >100dB (AES17, A weighted)

  • THD+N

    <0.05% into 32 Ohm @ 1VRMS (32mW)

  • Minimum load impedance

    16 Ohm

  • Short circuit protection

    Indefinite

  • Power (Nominal 12V)

    8VDC to 17.5VDC

  • Power consumption

    4W typical

  • Mains operation

    85VAC - 250VAC, 50-60Hz) via supplied UK/US/EU/AUS 12V adapter

Physical

Jump to...
  • Dimensions

    6.45 x 4.33 x 1.73" (164 x 110 x 44mm)

  • Weight

    <1.10 lb (<500g)

About CEDAR Audio SE 1

Make your intelligence more intelligible

Police, security and counter-terrorism forces require covert audio surveillance systems that are rugged while remaining as small and light as possible. They must be simple to operate and able to run on batteries as well as mains power so that they can (literally) be used in the field when necessary.

Designed following consultation with numerous forces and agencies, the CEDAR SE 1 Speech Enhancer satisfies all of these criteria.

It offers two channels of advanced filtering and speech enhancement in a small device that sits immediately between the probes (microphones) and the headphones. It offers minimal latency and the simplest possible controls, and has a 12V power input that allows it to run on mains or battery power, all of which make it ideal for covert surveillance and rapid tactical response.

Supplied in its own rugged case, the SE 1 itself is small enough to fit into your pocket, yet its advanced audio processing capabilities allow field operatives to monitor audio, reduce noise and improve the listenability of audio captured in adverse conditions. It's flexible too.

The SE 1 integrates easily with other equipment using either analogue or digital inputs and outputs, and incorporates two independent headphone outputs for live monitoring directly from the unit itself. You can use a single SE 1 to monitor two microphones in a single location, or two listeners can monitor single microphones in separate locations, or you can take the input from a single source and create two output signals - the untreated audio and the filtered audio - so that courts and investigators can hear both the original sound and the filtered version.

The SE 1's audio processing is far more sophisticated than that of conventional noise reduction products, offering two simultaneous processes that maximise listenability and intelligibility. The first is a powerful noise suppressor based upon CEDAR's ground-breaking FNR forensic noise reduction system. The second is a dynamic signal enhancement filter optimised to reveal the speech yet further, and which incorporates a limiter to avoid output clipping distortion if a sudden loud sound occurs when monitoring an otherwise quiet signal.

Uses for the SE 1 include:
• Improving signal quality and intelligibility during live surveillance
• Enhancing the clarity of real-time communications
• Making transcription easier and more accurate

CEDAR Audio SE 1 Features

  • A unique speech enhancement process
  • Super-fast setup and control
  • Small, light and portable
  • Analogue and Digital I/O
  • Dual independent headphones outputs
  • 12V power

Key Features

  • A unique speech enhancement process
  • Super-fast setup and control
  • Small, light and portable
  • Analogue and Digital I/O
  • Dual independent headphones outputs
  • 12V power

What's in the box:

  • SE 1 Portable 2-Channel Speech Enhancer
  • Rugged Case