CobraCrane 1HD 10' Heavy-Duty Single Arm Jib with Chain Drive for Cameras, Up to 7lbs Capacity

Various lengths to meet your need and budget
CobraCrane 1 camera jib offers 5 foot (CC1), 8 foot (CC1X) and 10 foot lengths (CC1P). They also offer a heavy duty unit (CC1HD) featuring multiple pivot points, heavy duty axles and chain and sprocket tilting control for front heavy cameras and camcorders.

Their single arm CobraCrane camera jibs come in 5 foot, 8 foot and 10 foot lengths and are ideal for DSLRs and camcorders up to 3 kilograms (6.5lbs.). This weight is inclusive of batteries, lights, lenses and any other device mounted to the camcorder. The CobraCrane camera jib systems are compatible with virtually all handheld palmcorders, most 3 chip handheld camcorders and most DSLR applications with standard sized lenses.

Easy to Transport, Easy to Store, Easy to Use
The single arm CobraCrane 1 camera jib is generally a lighter crane than the corresponding dual arm units, making them easier to transport and store, so easy in fact they can easily be transported by one person. An optional padded carry bag / backpack is available and makes it even easier to transport while providing excellent protection for your investment.

Boom, Swing, Tilt and optional Pan
The CobraCrane 1 camera jib can boom as low as ground level and as high as 4 meters with the CobraCrane 1PLUS camera jib. The CobraCrane 1X camera jib can reach 3.38 meters and the CobraCrane 1 camera jib (cc1) can reach 2.46 meters on a 5 foot tripod. So you can easily see over the fence or over the tree. All CobraCrane camera jibs can swing a full 360 degrees, so you can shoot magnificent panoramas, dramatic openings and suspenseful swings. With the optional cable operated Panhead, you can reposition the camera 90 degrees left and right of center.

Smooth as silk Manual and Static Tilt
Along with static tilting where the camera can always be set vertically (or any other angle) all CobraCrane 1 camera jib systems can manually tilt the camera up to 60 degrees back and 90 degrees forward. The tilt is controlled by the tilt handle and benefits from the drag and dampening of the existing fluid head. Since the tilt is completely dampened or dragged from your head, you get a nice smooth tilt exactly like you were tilting on your fluid head tripod. This is one of the main benefits over systems with handle / rod controlled tilting systems. When mounting your camera 90 degrees off center, cool dutch rolls can be achieved.

Appropriate Accessories to enhance your work
All CobraCrane 1 camera jib systems are compatible with their lightweight cable operated PanHead systems that can quickly and easily reposition the camera in a panning motion 180 degrees. (90 degrees left and right of center). A variety of monitoring options are available as well as LANC controllers. They offer a neat tracking dolly to add the next dimension of cinematography to your crane. Swapping cameras amongst CobraCrane camera jibs and SteadyTrackers is easy with their 577 / 501 compatible quick release plate kits.