CobraCrane 2Plus 10' Dual Arm Jib for Cameras, Up to 20lbs Capacity

Dual arm cranes: Bigger, Stronger, Larger Camera Capacities
CobraCrane 2 camera jib comes in 5 foot (CC2), 8 foot (CC2X) which can also be used as a five foot and both 10 foot length (CC2P) and a Heavy Duty 10 foot length (CC2HD) that can be both a 6 foot and a 10 foot length. The CobraCrane 2 camera jib systems are compatible with virtually all handheld camcorders, a wide variety of shoulder mount systems, most DSLR applications even those with full Rigs and large sized lenses. CobraCrane 2 camera jibs can handle cameras and rigs up to 25lbs. (11kg). This weight is inclusive of batteries, lights, lenses and any other device mounted to the camcorder. For large lens systems and other front heavy cameras and camcorders, please check out their CobraCrane 2 HD system.

Made of durable steel and high grade aluminum
The dual arm CobraCrane 2 camera jibs are made of durable steel and are built to last. Solid axles with dual bearings per axle provide years of trouble free use. An optional padded carry bag / backpack is available and makes it easier to transport while providing excellent protection for your investment. CobraCrane 2 camera jibs are big and very strong, but they can still be operated by a single operator and carried by a single person.

Static and Manual Tilting
Along with static tilting where the camera can always be set vertically (or any other angle) all CobraCrane 2 camera jib systems can manually tilt the camera up to 60 degrees back and 90 degrees forward. The tilt is controlled by the tilt handle and benefits from the drag and dampening of the existing fluid head. Since the tilt is completely dampened or dragged from your head, you get a nice smooth tilt exactly as if you were tilting on your fluid head tripod.

This is one of the main benefits over systems with handle / rod controlled tilting systems. While the standard CobraCrane 2 camera jibs use the cable and pulley for tilt control, the CC2HD uses a more robust Chain Cable and sprockets to manage tilting, which is more applicable to cameras with large lenses and heavier loads.

Available accessories to enhance your work
All CobraCrane 2 camera jib systems are compatible with their lightweight cable operated PanHead systems that can quickly and easily reposition the camera in a panning motion 180 degrees. (90 degrees left and right of center) with cameras up to 6.5 lbs. Focus and Zoom control can me managed with their LNC-50 LANC controller, which allows you to control Zoom, Focus, pause/record and Camera on and off. The LANC can be mounted to a variety of places on the CobraCrane or it's tripod.

A wide variety of monitoring options are available including their 7 inch High Definition monitor featuring both HDMI and component input. To add the next dimension of cinematography to your crane system, they offer their smooth tracking dolly and track. To make the work easier, check out their release plate systems to make swapping multiple cameras with single or multiple cranes easy.