Cinegears Ghost-Eye 600T Wireless HD & SDI Video Receiver

600T Wireless HD Video Receiver

Output: SDI/HDMI, dual output supported
2 External antenna with RPSMA socket

With the Cinegears Ghost-Eye Wireless HDMI & SDI Receiver 600T, receive high fidelity, uncompressed HD video up to 500 meters, and feel free as you shoot indoors or out, night or day.

With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project. Ghost-Eye Wireless Video Receiver 600T required for full feature utilization.

Pair this receiver with any Ghost-Eye transmitter.

Main Features of Ghost-Eye Wireless HD & SDI Video Transmitters and Receivers

• Uses License-Free 5GHz ISM frequency band, maximum 4 channels automatic or manual selection, Coexist with WIFI

• Supports wireless 10 bit HD video with no compression and no delay up to 1000 meters/3280 feet

• Uncompromised picture quality with very low latency <1ms

• Support point to point, and point to multi points network topology, Multiple receiver is supported with up to 4 receivers

• Cross compatibility between Cinegears Ghost-eye 100M, 150M, and 300M transmitter and receivers

• Highest resolution 10bits color depth 4:2:2, 1080p 60FPS HDMI and SD/HD/3G SDI input and output, HDMI - SDI cross conversion is supported

• Support professional audio formats include Dolby True HD, DTS-master, etc.

• AES-128/256 encryption with air interface HD video data stream

• HDMI 1.4 with EDID support

• Time Code, LUT, start/stop sync supported

• Build-in ultra silent intelligent fun prevent heat and moisture damage

• Wide range power voltage input, adapt most kinds of camera battery, optional Standard V-mount, Anton Bauer, or 1/4 bolt Mount battery plate can be installed.

• Any input and output ports with +/-8 kV ESD protection level (HBM, contact discharge)

• Plug & Play- fully hardware design, no software is required, firmware upgradable via mini USB port

• Professional standard 2-pin LEMO power plugs

• Built-in LCD screen displays for device and signal status

• Water and mist proof, shock proof production case with form insert ready for traveling

• CE, FCC, RoHS certified product, safe to use worldwide