Chrosziel Cine Bridge Plate Kit with PL Mount Adapter for Sony BURANO Cinema Camera

- Meta Mount Active Adapter for Sony BURANO to ARRI PL -
The Chrosziel Burano Mount is a Sony Burano camera to PL lens "hot mount" adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens.

When the Burano Mount is used with cine lenses with LDS or Cooke /i-Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing.

Using the Burano Mount with an ENG servo motor-controlled broadcast lens, the Focus/Iris/Zoom servo's can be controlled through the camera and are compatible with the Sony Burano GP-VR100 hand grip, Sony FX9 top handle, RCP or camera's web GUI. This allows for easy and full control of an ENG broadcast lens through the Sony Burano camera.

The Meta Mount is shimmable with the included shim set.

- Rear Right-Side Bracket for Sony BURANO -
Chrosziel Rear-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The rear-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the body-owned two threadings.

The Rear Side Bracket comes with numerous 3/8" & 1/4" fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Sony Burano camera body.

- Right Front-Side Bracket for Sony BURANO -
Chrosziel Front-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The front-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the light weight support (401-VEN) or bridge plate (401-VEN-BRI).

The Front Side Bracket comes with numerous 3/8" & 1/4" fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Chrosziel Light Weight Support 401-VEN or Chrosziel Bridge Plate 401-VEN-BRI.

- Left Front-Side Bracket for Sony BURANO -
Chrosziel Left-Front-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The front-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the light weight support (401-VEN) or bridge plate (401-VEN-BRI).

- Top Plate with 15mm Rods for Sony BURANO -
Chrosziel Top-Plate for Sony Burano, built-in 15mm rod support, with integrated mounting points 1/4" and 3/8", pair of 15mm rods - 9cm / 3.55inch with internal thread (extendable). The top-plate is split into two parts allowing the use of either the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics for maximum Run&Gun shooting.

401-BUR-TOP: The Cherry On The Sony BURANO "Cake"
The Top Plate comes with rod support in standard optical height, numerous 3/8" & 1/4" fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Additionally the top plate inherits various mounting points to move the Sony Burano cable clamps to the desired position.

- Cine Bridge plate for Sony Burano, Venice 2 & Venice -
Sony Burano, Venice 2 and Venice Cine Bridge plate with 19mm and 15mm rods for use with Bridge plates.

- Base Plate for Bridge Plate -
Base plate (L- 290mm, 11 inch) for bridge plate unit.

- Rear Rod Clamp for Light Weight Support -
Rear Rod Clamp for Light Weight Support, ideally suited for:
• 401-FX9
• 401-FX6
• 401-FS7
• 401-FS5
• 401-C70
• 401-C500II
• 401-C300III
• 401-C700
Light Weight Supports