Chrosziel Color Coded Custom Cage for Canon Cinema EOS Baseplate

The Chrosziel CustomCage is configured for the EOS C series Cameras. Configured and assembled for exclusive use with LWS 401-456. The cage consists of the following components: 700-00-02 Carrying Handle with 19mm 3/8" screw, two 700-00-03 Pairs of Corners (Black), 700-00-07 one pair of 35 mm (1/4") Locking Bars (Red), 700-00-05 one pair of 70 mm (2.75") Locking Bars (Blue), 700-00-12 Flash Shoe with four M4 Connecting Screws.

When combining Custom Cage Canon C 700-30 and LWS 401-456 please remove the lower red bar (and the base plate) from Custom Cage an fix the Cage directly on the LWS base plate. All combinations with LWS Canon C 401-456 fit directly onto the Brigde Plate Digi Cine with 19mm rods (401-F235).

Carrying Handle for CustomCage
The Chrosziel Carrying Handle for CustomCage fits on in all directions, on top and on the side. It includes a short 19mm 3/8"screw for mounting purposes.

35mm (1.4") Locking Bars for Extend CustomCage, 1 Pair, Red
The Chrosziel Locking Bars for CustomCage (1 Pair, Red) helps to extend the CustomCage by 1.4"/35mm. It comes as a pair for use with EOS C Series DSLR Cameras, Canon 5D MK II/III, Nikon D800 and other cameras with similar body size.

70mm (2.75") Locking Bars for Extend CustomCage, 1 Pair, Blue
The Chrosziel Locking Bars for CustomCage (1 Pair, Blue) helps to extend the CustomCage by 2.7"/70mm. It comes as a pair for use with Blackmagic Cinema Camera and the EOS C Series DSLR Cameras.

Corner for CustomCage
Angle (spare part) for CustomCage, total 90 Degree, short leg 30 Degree, long leg 60 Degree for optimal adaptation to the camera contours.

Flash Shoe for CustomCage
The Chrosziel Flash Shoe is for use with the Chrosziel CustomCage. It comes with 2 screws and a 1/4 to 3/8" thread adaptor.