
Picture does not represent the actual item
See Options
Need help? Ask our experts.
Review Summary
8-channel mixer preamplifier
AC mains, 120 V, 60 Hz
+4 dBm, +20 dBm (max.)
30 - 20,000 Hz, +20 dBm 0.5% THD
25 - 20,000 Hz, +18 dBm 0.5% THD
20 - 20,000 Hz, +/- 1 dB
0.01% at 1 kHz, rated output
Eight Input Ports: Each port accepts any input module.
One Bridging Input/Output
Input Port #1 to #8: 100 mV/10k ohms
Bridging Input/Output:100 mV/3.3k ohms
Main: Balanced, 150/600 ohms
Aux: Unbalanced, 10k ohms, 0 dBm
Less than 1 .5 dB, no load to full load
Master volume min: 90 dB
Master volume max: 77 dB
Bass: +/- 10 dB at 100 Hz, Treble: +/- 10 dB at 10 kHz
8 Input gain controls
1 Master gain control
1 Bass tone control 1 Treble control
1 Power ON/OFF switch
1 Tone defeat switch
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Self-protection, with AC fuse (inside)
Input No.1 to No. 8: Card-edge connector
Bridging, Aux output: RCA phono jack
Output: Screw-terminal strip
Mute, Remote VR: Screw-terminal strip
AC power cord/plug: SJT, 3-prong type
AC outlet: 3-pin grounding type
18W
-10 to +60 deg. C(12 to 140 deg. F)
16.5 x 3.9 x 12.1" / 419.1 x 99.06 x 307.34 mm
11.7lbs / 5.30 kg
The TOA Electronics 8-Channel Rack-mount Mixer controls and mixes up to eight independent input signals and delivers up to +20 dBm of output power. Optional plug in modules are available for use with mixer preamplifier to provide versatility for a wide range of operating design allows fast and easy custom for high performance with wide frequency response.
Very low noise and distortion and excellent output Module Slots accept any combination of TOA plug-in modules for unmatched Mute Bus permits multiple levels of paging priority using optional mute-type Master Volume controlled with an external 10k ohm linear-taper, Transformer-Isolated Output with screw terminal connector and protective cover plate.