Celestron Counterweight, Extra 11lbs (for CG-5 Mount)

SKU: CNCW11

This item is no longer available.

Overview
Compare
Q&A

Questions & Answers

JEFF K : WILL THIS WORK WITH A CGEM MOUNT?ROBERT W : Yes, I used it on my CGEM with no problem.MATTHEW W : The counterweight can accept a shaft with a 19-20mm diameter shaft. If you have the base modle CGEM, and not the DX or Pro models it should work perfectly fine. Hope this helps.JIM H : Sorry, don't have a CGEM.JUAN J : NO, it will not. The CGEM uses a 1" diameter counterweight bar. This counterweight has a 3/4" hole. You would have to drill the hole out to sligthly larger than 1" and then clean out the hole for the lock screw to get it to work.MARIO P : YesJOHN K : Dear Jef K, I think it will work. Of course you have to consider the weight of what you are mounting on the moun, Also is thediameter of the axis right. To be absolutely sure, please call Celestron in Torrance, Ca. They are quite helpful and will answer your question and any others you may have. Best, John K.tTHOMAS D : This weight is made for a counterweight shaft of 20mm diameter. The c'wt shaft of the CGEM is larger in diameter.Steven B : Yes, I bought one for just this purpose and it fits perfectly.
Shopper : Will this counterweight work with the Celestron CG-4 mount?Juan J : The CG-4 and CG-5 mounts use the same diameter counteweight bar. It will work.MICHAEL J : YesJIM H : Not sure, only have cg5.LOUIS A : Iit works on the c g e m mount but I do not know about the cg4Denny C : Will this counterweight work with the Celestron CG-4 mount?
Shopper : Why Did You Choose This?JOHN B : I have a Celestron Advanced GT mount that I am trying to put an 10 inch SC OTA on with additional accessories and I need extra weight to balance.DON W : I needed it.

Reviews about this item

Review Summary

2023-03-12T08:59:47

Rated 5 out of 5

Exact copy of the original AVX weight

It's the exact same weight & shape as the original that cam with my AVX mount.

RICHARD T.

2023-01-06T07:14:53

Rated 5 out of 5

ERGONOMIC COUNTERWEIGHT FITS MULTIPLE MOUNTS.

Superb counterweight construction. No sharp edges, stacks nicely with others, nylon anti-marring tightening lug. I line mine with thin flocking that avoids scratching the chrome plated dec shaft on the off sides of the tensioning lug. This works very well on my CGEM mounts and C11 SCT where I need three of these for balance. This fits other mounts with like dec shafts. See image as used on CGEM II.

BOB C.

2022-10-31T09:10:21

Rated 5 out of 5

Great addition weight for heavier AVX setups.

Great additional weight for our AVX setup when it?s in heavier configuration. Fast free shipping, arrived in perfect condition.

JULES C.

2022-10-14T08:26:22

Rated 5 out of 5

Eq6-r pro

Works on the sky watcher eq6-r pro mount no problem.

KEVIN M.

2022-07-31T09:14:46

Rated 5 out of 5

Does exactly what it's supposed to.

What to say? It has one job and it's doing it very well. Fits perfectly.

Tim J.

2022-06-22T10:14:00

Rated 5 out of 5

Good weight

It?s a weight. It?s the second counterweight for my scope setup and fits my AVX system.

Jeremy M.

2022-03-09T07:50:21

Rated 5 out of 5

Celestron AVX Counterweight

The Celestron 12lb counterweight worked perfectly on my AVX mount.

DOUGLAS B.

2022-02-14T07:44:38

Rated 5 out of 5

Excellent Service and Attention to Shipping Detail

The counterweight was exactly as advertised. The most important thing was the way it was shipped. Adorama double wrapped it in dense Styrofoam and then placed it in a box, inside a box. The weight arrived still intact within the inner box even though the outer box was damaged.

GREG G.

2021-11-12T10:47:58

Rated 5 out of 5

Celestron counterweight

Arrived in good condition. But, it?s still a hunk of metal with a screw in it to hold it in place. So not much to say it works. The price was good so I would recommend.

EDWARD L.

2021-10-15T08:47:33

Rated 5 out of 5

Heavy review.

A really solid weight.

MICHAEL K.

2021-09-26T08:34:53

Rated 5 out of 5

22lbs Counterweight

What can I say?you need at least one counter weight and possibly two if you want to mount an OTA more than 30 lbs.

JEFFREY V.

2021-06-20T09:14:05

Rated 5 out of 5

Gracias

Muy buen el producto

FRANCISCO G.

2021-06-14T15:27:55

Rated 5 out of 5

Heavy duty

It weighs 12 lbs and has a lock screw... oh yeah its black too! The only drawback was packaging. Need more clear tape to hold the box closed, the ups dork dropped it and the package was open when i got home. a couple of spots had scuffed off the black paint but a sharpie pen fixed that.

MELANIE C.

2021-05-09T10:37:24

Rated 5 out of 5

Incomplete order

I don't know... Haven't received my complete order

MICHAEL S.

2021-02-28T07:25:18

Rated 5 out of 5

Good quality

Excellent condition. Arrived very well packed.

Timothy S.

2021-01-20T12:28:46

Rated 5 out of 5

Works perfectly with an Orion Sirius EQ-G

It fits!!! I feel like Cinderella. It fit my mount perfectly and it came quickly. No longer do I need to jimmy-rig something to make my equipment balance. Thrilled! Thank you!

Alida B.

2021-01-11T07:18:20

Rated 5 out of 5

Great product!

Great product and fast shipping. Hard to find. Highly recommended.

CALEB B.

2020-12-11T09:53:55

Rated 5 out of 5

Works great for attaining perfect balance on my avx mount.

Fits properly and snug on my AVX mount. Works as expected. With my 8” Newtonian and dslr, I needed this second counter weight to achieve balance.

NICK R.

2020-10-20T08:09:16

Rated 5 out of 5

Perfect counterweight

Grabbed this after adding my guide scope to my 12 lb OTA, since I wanted to keep my finder scope on it also, and added another dovetail bar on top. Initially, I swapped the bar Orion sent me with my OTA with a Celestron all-in-one type, which was noticeably heavier. Immediately, I had balancing problems, and this was the perfect option to provide the right balance with room for a slightly heavier OTA. The plastic insert under the screw, which touches the metal bar on the mount (mine is AVX) was actually better on this than the one on the OEM weight, which had come undone from the screw after unscrewing it a few times. I've not had any balancing problems since, and the CW is about 2/5's up the bar from the outer-most point, so there's plenty of room in either direction.

DEREK N.

2020-10-12T10:27:59

Rated 5 out of 5

Great Service...

Excellent Service from communication to on time delivery. Product is as described and performs as needed.

PETER L.

2020-08-25T10:58:13

Rated 5 out of 5

Works just like you'd expect

Looks just like the picture, functions just like the one that comes with the AVX mount. Nice and simple.

NICK R.

2019-11-20T21:32:34

Rated 5 out of 5

GREAT PRICE FOR A GREAT COUNTERWEIGHT!

I purchased a Celestron AVX from Adorama...still learning how to use it but seems easy. I mounted a GSO 8" cassegrain on it so needed an extra counterweight. Adorama had the best price in the industry! Perfect match for the one that came with the AVX and balances my GSO perfectly with a few pounds to spare. Incredibly fast shipping and a fabulous price. Go with Adorama all the way. And, if you need additional counterweights for your AVX or other mount...shop Adorama first!!!

BOB C.

2019-11-08T09:33:37

Rated 5 out of 5

Available counterweight at best price from Adorama

Celestron 11 lbs counterweight for CGEM was just what I needed to balance my cgx mount. It was back ordered at most suppliers but Adorama had it available and at the best price I could find.

WILLIAM S.

2019-11-07T08:06:31

Rated 5 out of 5

it weighs 11 lbs

Its a weight. As advertised. For use with my CGEM mount.

Peter E.

2019-06-12T15:17:08

Rated 1 out of 5

Excellent

Had product I needed, processed and shipped order quickly

Ronald L.

2019-05-21T09:54:44

Rated 5 out of 5

Perfect

Just as expected.

JOHN M.

2018-01-02T09:39:56

Rated 5 out of 5

Fast and easy purchases.

Heavy weight at 22lbs but their price beat EVERYONE’s price. Fast and easy.

George K.

2017-09-20T11:01:45

Rated 5 out of 5

Also fits AVX weight shaft

Adorama asked for a review, so here it is. As advertised, it is a counterweight. It is flat on two sides and round at the edge. It is painted a semi-glossy black. It works to counterbalance my 9.25" SCT and new accessories I added recently. Although it is advertised as 11 pounds, mine weighs 11 pounds 2 ounces, so I got more than I paid for. I'm keeping it and not paying for the extra 2 ounces, so there, ha ha.

Josef P.

2017-04-15T08:26:02

Rated 5 out of 5

Heavy duty and durable

I purchased two extra 22 lb weights for my CGX-L mount. These extra weights are just what I needed to balance my Celestron 14" scope. While not as portable as I would like, these are great additions to my backyard observatory. Great job on a great product.

ERIC R.

2017-03-21T13:15:05

Rated 5 out of 5

Celestron Counterweight for CGE Pro telescopes

Received in good condition - very well packed.

Joseph D.

About Celestron Counterweight

FEATURED REVIEWS

Exact copy of the original AVX weight

By RICHARD T.

It's the exact same weight & shape as the original that cam with my AVX mount.

ERGONOMIC COUNTERWEIGHT FITS MULTIPLE MOUNTS.

By BOB C.

Superb counterweight construction. No sharp edges, stacks nicely with others, nylon anti-marring tightening lug. I line mine with thin flocking that avoids scratching the chrome plated dec shaft on the off sides of the tensioning lug. This works very well on my CGEM mounts and C11 SCT where I need three of these for balance. This fits other mounts with like dec shafts. See image as used on CGEM II.

Using accessories such as cameras, Lens Shades, Tele-Extenders and the 2" Diagonal will affect the balance of your Celestron Schmidt-Cassegrain telescope. Counterweights restore proper balance, increasing ease in handling and improved tracking accuracy.

You don't need perfect balance to operate your telescope. In fact, it's not always possible to achieve perfect balance with fixed-position weights. All you need to do is reduce, or eliminate, swing when R.A. and DEC locks are released. Celestron counterweights help you achieve the desired balance and stability with ease.