
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters: All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Noise Cancellation: 6-15 dB attenuation
Phantom Power: 24 V, selectable
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Push-on mini-terminal block, balanced
Impedance: < 50 Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable, 200' maximum cable length between any two Converge Pro devices
Autoswitching with Quality of Connection (QoC)
10/100 Mbps Ethernet Network Port
10/100 Mbps Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS- 232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,1 stop bit, no parity
Hardware flow control on (default)/off
Version 2.0 Compatible
Type: B-connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max, 40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-Adjusting
100-240 VAC; 50/60 Hz
30 W Typical
Ambient unit temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48-2005: AES standard on interconnections - Grounding and EMC practices - Shields of connectors in audio equipment containing active circuitry (self certified)
U.S.A. & Canada:
CSA safety listed
EU Countries:
RoHS compliant
WEEE compliant
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
1 10W speaker amplifier
1 telco input/1 telco output
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters: All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Push-on mini-terminal block, balanced
Impedance: < 50 Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Binding Post Connection
10 Watts at 4 Ohms Impedance
THD + Noise: < 0.5%
RJ-11 POTS (plain old telephone service) or analog PBX extension
A-lead supervision provided
Pass-though RJ-11 analog jack
Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled
Frequency Response: 250Hz to 3.3 kHz +/-1dB
THD+N: <0.3% re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level
Tail Time: 31 ms
Null: 55 dB nominal
Noise Cancellation 6-15 dB attenuation
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable, 200' maximum cable length
Autoswitching with Quality of Connection (QoC)
10/100 Mbps Ethernet Network Port
10/100 Mbps Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS- 232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,1 stop bit, no parity
Hardware flow control on (default)/off
Version 2.0 Compatible
Type: B-connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max, 40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-Adjusting
100-240 VAC; 50/60 Hz
30 W Typical
Ambient unit temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48-2005: AES standard on interconnections - Grounding and EMC practices - Shields of connectors in audio equipment containing active circuitry (self certified)
CONVERGE Pro 880T Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 880 Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 880T Mixer: 7.5 lbs (3.40kg)
CONVERGE Pro 880 Mixer: 7.5 lbs (3.40kg)
Explore the world of professional audio conferencing with the 16-Channel AEC Microphone Mixer Professional Bundle. This comprehensive package includes the CONVERGE Pro 880 and CONVERGE Pro 880T 8-Channel Mixers, both renowned for their superior audio performance and advanced conferencing features.
The CONVERGE Pro 880, a flagship product in professional conferencing solutions, is a complete digital matrix mixer that boasts ClearOne's legacy audio clarity technology. Experience unmatched sound quality with industry-leading HDConference audio processing, delivering the most natural audio conferencing experience possible. This system features Distributed Echo Cancellation, Noise Cancellation, First Microphone Priority, and Adaptive Modeling, all working together to provide cutting-edge sound quality.
The CONVERGE Pro 880T, on the other hand, is a complete digital matrix mixer conferencing solution with a built-in telephone interface and speaker amplifier. It's perfect for collaboration, presentation, and distance communications. Like the Pro 880, the 880T also utilizes ClearOne's proven HDConference audio processing for unmatched sound and the most natural audio conferencing experience possible.
Both mixers offer a range of advanced conferencing features, including next-generation Acoustical Echo Cancellation, improved duplex performance, and push-to-talk microphone compatibility. They also feature next-generation Noise Cancellation and increased resolution on the Microphone Preamp stage.
Management improvements include integrated Ethernet and USB connections, SNMP and HTML remote management agents, an event scheduler, and a diagnostic console. The simplified configuration software allows for drag & drop A/V and channel objects, selectable views-unit, matrix, channel, and an expanded Serial Command List.
These mixers are scalable, allowing you to link multiple Converge Pro units for extensive microphone coverage and up to 16 phone lines. They also feature an enhanced expansion bus, ten mic gating groups, 32 presets, and 255 Macros for customized audio control/configuration.
Whether you're setting up for conference rooms, boardrooms, courtrooms, distance learning facilities, convention centers, hotels, training rooms, telemedicine facilities, or houses of worship, the 16-Channel AEC Microphone Mixer Professional Bundle is the perfect solution for your audio conferencing needs.