


See Options
2 Year
$499.99
3 Year
$649.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
1 10W speaker amplifier
1 telco input/1 telco output
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters: All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Push-on mini-terminal block, balanced
Impedance: < 50 Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Binding Post Connection
10 Watts at 4 Ohms Impedance
THD + Noise: < 0.5%
RJ-11 POTS (plain old telephone service) or analog PBX extension
A-lead supervision provided
Pass-though RJ-11 analog jack
Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled
Frequency Response: 250Hz to 3.3 kHz +/-1dB
THD+N: <0.3% re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level
Tail Time: 31 ms
Null: 55 dB nominal
Noise Cancellation 6-15 dB attenuation
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable, 200' maximum cable length
Autoswitching with Quality of Connection (QoC)
10/100 Mbps Ethernet Network Port
10/100 Mbps Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS- 232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,1 stop bit, no parity
Hardware flow control on (default)/off
Version 2.0 Compatible
Type: B-connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max, 40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-Adjusting
100-240 VAC; 50/60 Hz
30 W Typical
Ambient unit temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48-2005: AES standard on interconnections - Grounding and EMC practices - Shields of connectors in audio equipment containing active circuitry (self certified)
CONVERGE Pro Mixer
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters, All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Noise Cancellation: 6-15 dB attenuation
Phantom Power: 24 V, selectable
Push-on mini-terminal block, balanced, bridging
Impedance: < 10K Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable 200' maximum cable length between any two Converge Pro products
Autoswitching with Quality of Connection (QoC)
10/100 Mbps Ethernet Network Port
10/100 Mbps Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS-232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
Version 2.0 compatible
Type B connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max,
40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-adjusting
100-240 VAC; 50/60 Hz
30 W Typical
Ambient unit temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48 compliant (audio equip grounding)
U.S.A. & Canada:
CSA safety listed
EU Countries:
RoHS compliant
WEEE compliant
CONVERGE Pro 880T Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 8i Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 880T Mixer: 7.5 lbs (3.40kg)
CONVERGE Pro 8i Mixer: 7.5 lbs (3.40kg)
Take your audio conferencing and recording to the next level with the 16-Channel AEC Microphone Mixer Professional Bundle. This comprehensive package includes the CONVERGE Pro 880T 8-Channel Mixer with a built-in telephone interface and speaker amplifier, and the CONVERGE Pro 8i 8-Channel Input-Only Microphone Expansion Mixer.
The CONVERGE Pro 880T is a professional conferencing system that provides a complete, digital matrix mixer conferencing solution. It's designed to facilitate collaboration, presentation, and distance communications with unmatched sound quality. With ClearOne's legacy audio technology and proven HDConference audio processing, the 880T delivers the most natural audio conferencing experience possible. It features eight built-in mic inputs, an enterprise-telephone interface, and a speaker amplifier for standalone applications.
The 880T is equipped with next-generation Acoustical Echo Cancellation, offering full bandwidth (20Hz to 22Khz) echo cancellation, improved duplex performance, and push-to-talk microphone compatibility. It also features next-generation Noise Cancellation, adaptive modeling to room ambient noise condition, and increased resolution on the Microphone Preamp stage.
The CONVERGE Pro 8i is a professional conferencing expansion mixer that can extend your conferencing to large rooms with up to 8 additional microphones. Each microphone input includes powerful, ClearOne HDConference processing for true, stereo echo cancellation, full-duplex conversation, and auto mic-mixing intelligence.
Both the 880T and 8i offer integrated Ethernet and USB connections, SNMP and HTML remote management agents, an event scheduler, and a diagnostic console. They also provide superior audio performance with next-generation Distributed Echo Cancellation on every mic input, first-mic priority, and a 20 Hz-22 kHz bandwidth for full-range audio response.
This professional bundle is perfect for use in conference rooms, boardrooms, courtrooms, distance learning facilities, convention centers and hotels, training rooms, telemedicine facilities, and houses of worship. With the 16-Channel AEC Microphone Mixer Professional Bundle, you can create a professional, yet affordable, large-room conferencing experience that sounds as natural as face-to-face meetings in the same room.