


See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
24-Microphone Array
Number of Beams: Two Patterns, either 5 or 6 Beams
Polar Pattern: Custom
Frequency Response: 150 Hz to 16 kHz, +/-3 dB
Dynamic Range: 150 Hz to 16 kHz, >70 dB
Type: 0.2" / 5.1 mm Black Header, Male, Phoenix-Type Euroblock
Audio: 2 Channels
Output Power: 2 x 10 W Max, 8-Ohm Load
Frequency Response: 20 Hz to 22 kHz at +10 dBu, +/-0.5 dB
THD + Noise: 20 Hz to 22 kHz at +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz at +20 dB, >102 dB, with 20 kHz digital Low-Pass Filter
Crosstalk: Channel to Channel, Stimulus at +20 dBu to Receptor 10 W Output 8-Ohms Load, 20 Hz to 22 kHz
4 LED Indicators>br> Mute/Un-Mute Configuration with 8 Color Options, Two Blink Patterns and Warning Indications
Beam Enable/Disable
Acoustic Echo Cancellation (AEC) On/Off
Noise Cancellation (NC) On/Off
Automatic Level Control (ALC) On/Off
Gain Adjust
Mute On/Off
Auto Gate/Manual Gate
Console AI Lite Software for Configuration and Administration
Ports Labeled as "Expander" on Huddle Chassis, and "P-Link" on BMA CTH
P-Link In & Out: Proprietary Network
Ports Type: RJ-45 Cat 5e/6, Expandable
Distance: Up to 200' (60m)
Type: Slide Switch
Slide Toward P-Link to Power Device by P-Link
Slide Toward PoE to Power Device by PoE Injector
Power Type: PoE, PoE+
Port Type: RJ-45
Power Source: PoE Injector or Equivalent
PoE: IEEE802.3at Compliant Devices Providing 56 V and 640 mA (36 W)
P-Link In - Mode B
PoE In - Mode A and Mode B
(BMA CTH requires its own PoE (IEEE 802.3 at compliant) if 2 x 10 W Speakers Are Driven
Power Consumption:
100 to 240 VAC, 50/60 Hz, 9.1 W Typical without Speaker Amp
38 W at Max Power 1 kHz (2 x 10 W)
Thermal:
130 BTU/Hr at Max Power
Operating Temperature:
14 to 104 Degree F (-10 to 40 Degree C) Ambient Temperature
Ceiling Mount (24" / 609.6 mm Tile Grid)
23.72 x 23.72 x 2.13" (602.5 x 602.5 x 54.1mm)
7.7 lbs (3.5kg)
3-Channel Balanced Audio Mic/Line Inputs with AEC
Single-Channel Balanced Audio Line Input without AEC
3.81 mm Orange-Color Phoenix/Euroblock Type Male Header, Push-On Mini-Terminal Block
2-Channel Balanced Audio Line Outputs, 3.81 mm Orange-Color Phoenix/Euroblock Type Male Header, Push-On Mini-Terminal Block
1x USB Type-B (3.0)
1x USB Type-A (3.0)
RJ-45, 10/100/1000 Mb/s, Passthrough to USB Type-B (3.0)
Type: 0.2" (5.1mm) Black Header, Male, Phoenix-Type Euroblock
Audio: 2 Channels
Speaker Output Port: Dual Binding Posts
Output Power: 2 x 10 W Max, 8-Ohm Load
Frequency Response: 20 Hz to 22 kHz at +10 dBu, +/-0.5 dB
THD + Noise: 20 Hz to 22 kHz at +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz at 20 dB, >102 dB, with 20 kHz Digital Low-Pass Filter
Crosstalk (Mic/Line): Channel to Channel, Stimulus at +20 dBu to Receptor
If No Built-In Amps Used on Either the Huddle DSP or BMA CTH, Only 1 Poe+ Power Supply Is Required for All 3 Devices
If Built-In Amps On Huddle DSP and/or BMA CTH Used, Two Poe+ Power Supply Units Will Be Required; One for The Huddle DSP, One For The BMA CTH
No Additional Poe+ Power Supplies Are Required for Use of The Bluetooth Expander
7.52 x 7.83 x 1.73" (191 x 199 x 44mm)
2.9 lbs (1.32kg)
671010026986
Let the Collaborate Versa Pro CT USB Audio-Conferencing System with Beamforming Microphone Array revolutionize your communication experience. This sleek, modern, and high-tech system is equipped with a Huddle CTH audio DSP and the new Huddle-compatible, patented BMA CTH, making it an ideal choice for small-to-medium-sized rooms.
Designed for professional use, this advanced audio-conferencing system is perfect for Bring Your Own Device (BYOD) collaboration. It seamlessly integrates with any cloud-based video conferencing service, including COLLABORATE Space, Microsoft Teams, WebEx, Zoom, and more. This versatility makes it a valuable addition to any workspace, from huddle and BYOD spaces to conference rooms, boardrooms, training centers, and lecture halls.
The standout feature of the Collaborate Versa Pro CT is its beamforming microphone array. This innovative technology ensures clear, crisp audio capture from all meeting participants, even those speaking softly or from a distance.
Furthermore, the system's USB connectivity simplifies setup and usage, eliminating the need for additional hardware or software. This makes the Collaborate Versa Pro CT not only a high-quality audio solution but also a user-friendly one.
Whether you're conducting audio conferencing, video conferencing, or utilizing cloud-based video collaboration workspaces, the Collaborate Versa Pro CT USB Audio-Conferencing System with Beamforming Microphone Array is designed to enhance your communication and collaboration experience.