
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Built-in
100-240V AC 50-60Hz 550VA
0.97 at 120V AC, 0.92 at 240V AC
550W at 120V AC, 550W at 240V AC
27W at 120V, AC 30W at 240V AC
Measurements done with all LEDs at maxi-mum intensity. Measurements made at nominal voltage. Allow for a deviation of +/- 10%
Neutrik powerCON TRUE1
Neutrik XLR 5-pin
3x Fixtures at 110V, 6x Fixtures at 240V
ANSI E1.11 USITT DMX 512-A
Combined convection and forced air - 2 fan
0 to 40 deg. C (32 to 104 deg. F)
Anodized aluminum extrusion
Quick release lever for tilt adjustment
IP20
RGBW, RGB, KHi, HSi, Cine-Q. Grouping x1, X4, Odd/Even
Linear
24,000 lm
Fully homogenized lenses
22 deg. (approx.)
Symmetrical direct illumination
Adjustable 2800 - 6500K
Performance enhanced
92 at 3200K
94 at 4400K
94 at 5600K
92 at 3200K
94 at 4400K
90 at 5600K
L70 at 50,000 hours
CISPR 32:2015 /EN 55032:2015, CISPR 24:2010/EN 55024:2010, IEC 60598-2-17:1984 + A1:1987+A2:1990 used in conjunction with IEC 60598-1: 2008 (Seventh Edition) FCC Part 15 Subpart B:2015 & ICES-003:2016 CSA C22.2 No. 166:2015-06 UL 1573:2003 R:2014-01
46.5 x 6.5 x 7.5" (1181.10 x 165.10 x 190.50mm) (without fixings)
40 lbs (18.14kg)
Using a homogenized LED source capable of delivering variable color temperature, plus/minus green shift control and the ability to produce deep saturated colors when needed, the Studio Force II is specifically designed for TV Broadcast and film applications but also performs particularly wellin other situations demanding high quality tunable white light such as touring key lights, exhibitions, corporate events and theatre lighting. The Studio Force II uses the same ColorSure technologies found in other innovative Chroma-Q fixtures to deliver consistent color across fixtures. With an extreme output of up to 24,000 lumens, the Studio Force II 48battens evenly wash large areas, complemented by smooth, theatrical grade dimming.