Creality Hi Multi-Color 3D Printer Combo with CFS Add-On Kit

A Wonderful Choice for Multicolor 3D Printing

CFS (Creality Filament System)
Jumpstart Your Creativity with Color.

Color-boost Your Creative Projects
CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.

Coloring the World Around You

All the Best While Hands-off

Built-in Sensor to Read Filament Info
Just scan a Creality RFID filament on the right side of the printer base, and the built-in sensor will automatically identify its color and type. It will remind you when there is a conflict between the slicing info and the actual filament in use.

Auto Bed Leveling & X-axis Tilt Reduction
A good first layer is a nice print half done. Creality Hi, with a comprehensive and precise auto-leveling system, grants you the perfect first layer every time.

Dual Lead Screws
Two independently motorized lead screws adjust the X-axis to the horizontal position.

High-sensitivity Sensor
A strain gauge in the toolhead auto-probes the bed for an accurate leveling mesh.

1000W Heatbed
A 1000W AC heatbed that can reach 60 Degree C in 30s or 100 Degree C in 90s, reducing the preparation time.

Smooth Filament In/Out by Touch Control
Filament load & unload now gets even easier with the CFS in play. Simply insert the filament into the feeding tube, and then give a few quick touches.

Distinct Sounds to Keep You Informed
The built-in buzzer will give off corresponding sounds when the print task is finished or paused unexpectedly. No need for your constant attention.

Easy from Assembly to First Print

Assembly Gets Even Easier
Creality Hi is 95% pre-assembled. You can get it going in just 8 minutes after tightening only seven screws and some wiring. It's the most user-friendly bed slinger Creality has ever offered.

Fold-away 3.2" Touch Screen
No assembly required. It is responsive to your fingertip, and you can easily fold it away for a smaller footprint. The cable connection is also more solid.

Helpful Boot-up Quick Guide
Creality Hi features a simple quick guide that covers all necessary software setups and first-time calibrations. Even a beginner can nail it.

Camera with a Privacy Cap
• Video monitoring of your print jobs
• One tap to share time-lapse video
• Camera cap for privacy protection

A Much Quieter Experience
The operating noise has been tempered by the dynamically balanced fans, the frictionless linear rail, and the smooth linear rods. So you get more tranquility.

• Silent Mode: <= 48 dB

Built with Quality in Mind

As Steady as It Is Stylish
Creality Hi features an all-metal body with unibody parts die-cast out of aluminum alloy. It looks stylish and ensures minimal shaking. The printer also gets a linear rail on the X-axis and two linear rods on the Y-axis. The rigid structure and smooth motion will elevate the print quality considerably.

Active Input Shaping
Creality Hi owns a proprietary algorithm that can analyze the amplitude of vibrations at different print speeds and generate opposite signals to cancel out the vibrations actively. So, you will get faster prints, less ringing, and smoother surfaces.

Clean Support Removal for Intricate Models
CFS makes post-processing much easier - by creating the support structures in a different material that can be snapped away or even water-soluble. The resulting 3D model will not show any support marks.

Latest Techs for Capable Extrusion

Metal Extruder Gears
Ultra wear-resistant and long-lasting.

Automated Filament Cutter
Durable blade that can be magnetically pulled back to position after cutting.

Bed Leveling Sensor
Upgraded in automation and precision.

Integrated Nozzle Design
Clog-free & quick-swap.

Run-out Sensor in the Extruder
The usage of filament is now monitored more closely and precisely for run-out or breakage. Filaments can be unloaded or switched (with CFS) with less residual waste.

Boosted by FOC Step-servo Motors
The X and Y axis of Creality Hi are driven by step-servo motors with FOC algorithms. Minimal step loss and layer shift. It enables quiet and smooth motion even at a mind-blowing print speed.

• 500 mm/s max speed
• 12000 mm/sq. s max acceleration

Advanced Software, Seamless Workflow

Creality OS Profoundly Evolved
The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fine-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.

• Multi-filament Management
• Root Access
• Expert Mode

Creality Print Completely Rebuilt
All-new UI for a refreshing slicing experience. The ready-to-go presets can easily match your specific nozzle diameter and filament. Meanwhile, it includes many new functions to boost work efficiency and print quality.

• 40+ Filament Presets
• Multicolor 3MF Model Slicing
• Multi-printer Control via LAN

Creality Cloud, an Engaging Community
• 3D Model Library - Get a myriad of 3D Models in diverse categories
• APP for Cloud Printing - Slice, print, and monitor from the cloud
• Online Community - Interact with other 3D printing hobbyists

Marvellous RFID-tagged Filament
Creality RFID filament is the perfect match with CFS. The included RFID chip carries filament type, color and other info that can be read by the CFS. Therefore, it enables intelligent filament management which is key to multicolor tasks.