Came-TV CAME-ARGO 3-Axis Camera Gimbal with MA-W1 Wireless Follow Focus Controller

CAME-ARGO 3 Axis Gimbal
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less adjustable. All of the motors are equipped with encoders which makes their performance much more smooth and accurate along with increasing the lifespan of the battery. Included are a wireless remote control which allows you to control the gimbal from a distance and a foldable carbon fiber stand. Everything fits into the includes compact hard case.

• Pre-calibrated 32-bit Alexmos control board
• Wireless Joystick

On the top section there are two handles that are easily hand screwed for installation or removal. On the handle there is a monitor mount and a wireless remote which allows you to remotely control the gimbal and switch between modes. The entire top handle bar can be easily separated from the gimbal which than can be mounted to other devices like a crane, slider or drone with the included adapter plate. On the middle section there is a quick release battery that has a lifespan of about 15 hrs. (Less if you have electrical accessories attached) There are two ports with a hinged rubber seal on them. The top port is a USB connection that allows you to connect your computer to the Alexmos Board. The other is a RC connector.

On the bottom there is a video transmitter along with a D-Tap out which you can power an accessory like a wireless follow focus. There is a 15mm rod mount on which you can mount an accessory such as a wireless follow focus.

Wireless Follow Focus Controller
The digital wireless lens control provides the ability to remotely control when used on products such as jibs, cranes, dollies, gimbals, steadicams and drones. When the camera is crowded with crew and accessories, the wireless control allows the focus pullers to precisely control the focus, iris or zoom remotely. The lens driver quickly mounts on either 15mm or 19mm rods. This system is compatible with wide varsity of cameras and lenses such as: Alexa, ARRI, RED, Sony, Canon, Nikon and Panasonic.

• Single channel, one focus motor inside the receiver
• Fast response: Time delay is less than 10mm seconds
• Precise circuit control: No electronic error and out-of-step phenomenon
• Driver can be installed on 15 mm and 19 mm rods
• Fastest linear velocity speed is can reach from 330 to 380 mm/second
• 0.5, 0.6, 0.8 and 1.0 drive gear to fit a variety of specifications of the lens