FlyFire Manti4 Drone Parachute for DJI Matrice 4

Manti4 series drone parachutes are compatible with DJI Matrice 4, Mavic series, Manti 4 series and Matrice 4D/4TD drones equipped with Airport 3. The new processor has doubled the computing speed, and the full-blooded APS3.0 algorithm has a fast response time of only 500ms

Manti4 series drone parachutes are compatible with DJI Matrice 4, Mavic series, Manti 4 series and Matrice 4D/4TD (Manti 4DOCK version) drones equipped with Airport 3. The new processor has doubled the computing speed, and the full-blooded APS3.0 algorithm has a fast response time of only 500ms

Designed for Matrice 4
The Manti4 series parachute was first used on industrial drones such as Matrice 4 and Matrice 4D/4TD, and is another evolution of the Manti series parachute.

The software of both models has undergone hundreds of flight parachute opening tests and software false touch detection, and finally became a reliable partner for your safe flight.

Dual sensors detect flight attitude
Manti 4 uses accelerometer and air pressure sensor to fuse data to determine flight attitude, making identification more accurate. Combined with the front parachute opening algorithm, it eliminates the risk of propeller entanglement.

Front opening algorithm/500ms response speed
After the drone enters the alert mode, Manti's sensors monitor the drone's flight posture in real time. The APS system identifies the posture 300 times per second and stores the flight log. In the event of a dangerous situation, it will choose the right time to open the parachute to protect the aircraft and property on the ground.

5.5m/s speed reduction
When an uncontrollable situation occurs during the operation, Manti will open the parachute for forced landing. The 1.1m2 parachute cloth area provides air resistance, and the three-layer special coating reduces the air permeability of the parachute cloth, making the forced landing speed only 5.5m/s, effectively reducing the impact kinetic energy and protecting the safety of pedestrians and property on the ground.

Chip "new" upgrade
The processor speed is three times faster than the previous generation, and the ability to process data is more powerful and relaxed. At the same time, the power consumption and heat generation are lower. The APS3.0 system runs more smoothly and stably, making the flight safer.

APS 3.0 parachute opening algorithm
Flyfire's proprietary parachute opening algorithm comprehensively determines the timing of parachute opening by integrating IMU and acceleration sensor data. It can interact with the drone through an interface to obtain flight control data. The algorithm is trained with thousands of accident data and is combined with an original frontal parachute opening algorithm to reduce the risk of entanglement during parachute opening and ensure flight safety.

Flight log, clear at a glance
Added 128MB storage space for RTC clock, each flight log can be accurately recorded. Automatically generate flight log files, users can export them and let Firefly find the exact cause of the crash.

Safely accompany you from takeoff to landing
Flyfire Technology fully automatic drone parachute, automatic identification, automatic triggering of parachute opening

Fast charging, no problem for last-minute trips
Quick recharge, the battery level can be recharged from 0% to 70% in just 30 minutes, which is enough for you to fly 3 times (30 minutes per flight) to ensure safe and smooth operation.