Flipbac FBG4 Camera Grip for Point & Shoot Digital Camera
See all Flipbac items

Flipbac FBG4 Camera Grip for Point & Shoot Digital Cameras

SKU: CZFBG4

This item is no longer available.

Overview
Compare
Protection
Q&A

Questions & Answers

Shopper : I have a Canon Powershot SX150 that definitely needs help in the "grip" departmnent. Which of the Flipbachgrips wpuld fit best on this camera ? I had a nice SONY that slipped out of my hands, breaking the sensor, so I now know how important a "grippy" add on can beGOLIN M : I can't address which one fits best. However, the one I have for the S100 is well-worth the money.WENSHU C : The SX150 has a grip desigh not as that of Nikon 1 V1 and the likes, therefore you may not be able to attach a Flipbac. See the types of grip at Flipbac website.BOB R : flipbac fgb4MAHAIGE M : Please search "Flipbac FBG4 Camera Grip" website. They have information to show you what kind grip to fit your camera.Terry Y : I used this on an Olympus EPM-1 and liked it. It is textured and does not have the model number/logo molded into it.
ROBERT S : Will this model fit the Olympus E-PL3?RUI M : Yes, I put it on my EPL3 and it fits perfect.Terry Y : Hi, I put it on my EPM1 so I think it would work fine on the EPL3.RICHARD C : It fits nicelyBRADLEY T : I attached this to my Olympus PEN E-PM1, so yes it should fit your E-PL3. It is a great and cheap add on that makes your camera much more comfortable in your hand. The grip is an almost "leather" feel to it, not a slick hard plastic feel. I highly recommend this grip! HUBERT L : I bought one for my E-PM1. It fits perfectly. It should also fit the E-PL3.BRADLEY T : I attached this to my Olympus PEN E-PM1, so yes it should fit your E-PL3. It is a great and cheap add on that makes your camera much more comfortable in your hand. The grip is an almost "leather" feel to it, not a slick hard plastic feel. I highly recommend this grip! STEVEN L : It fits epm1 perfectly. I can't think of any other reason it won't fit epl3.

Reviews about this item

Review Summary

2018-08-14T12:24:51

Rated 5 out of 5

Handy and inexpensive gril

This inexpensive, easy-to-attach rubber grip is perfect for enhancing the handling of smooth compact cameras like my Canon Powershot S100. It has a small recess on the back that accomodates the tiny useless grip on the camera, and it attaches to the camera with a strong adhesive panel.

Ron L.

2014-06-23T21:00:00

Rated 5 out of 5

Good addition to small camera

I added this grip to my small Olympus e-pm1 which has no molded grip on the body. It makes the camera easier to hold and to shoot. It also gives me more confidence that the camera won't slip out of my hand. I've used the same grip (largest Flipbac makes, I think) on a point and shoot camera for the same reason and with the same result.

JOHN Y.

2014-05-19T21:00:00

Rated 5 out of 5

Works as it is supposed to.

Adds the grip with which the camera should have been made. Makes using the camera much easier.

STEVE S.

2013-09-23T21:00:00

Rated 3 out of 5

Could use some improvement

The idea is great, you now have a grip but for somebody with big fingers the space between the lens and the grip could be a little tight.

alexron

2013-08-12T21:00:00

Rated 5 out of 5

very practicle

Stuck it onto the case instead of camera and it works great its small but that is just the right size for the RX-100 - 2 camera

Lyle W.

2013-01-16T19:00:00

Rated 4 out of 5

Nice addition on Nikon 1 V1

It fits well on my V1 and makes it more comfortable to hold. Was considering other offerings but this is much cheaper, and not regret, it is aslo nice or at least good enough!

WENSHU C.

2012-08-26T21:00:00

Rated 5 out of 5

Excellent little grip for Canon S95

Just got the grip today and installed it in a minute or less on my Canon s95. This grip look great on the S95 and makes holding the camera a lot easier. Before the gip I had a hard time holding it one handed, the camera was too slippery. I'm not sure how it will hold up when slipping it into my jeans pocket everyday, time will tell. The tape on the grip is very tight so hopefully it won't rip off

KEVIN J.

About Flipbac FBG4

FEATURED REVIEWS

Excellent little grip for Canon S95

By KEVIN J.

Just got the grip today and installed it in a minute or less on my Canon s95. This grip look great on the S95 and makes holding the camera a lot easier. Before the gip I had a hard time holding it one handed, the camera was too slippery. I'm not sure how it will hold up when slipping it into my jeans pocket everyday, time will tell. The tape on the grip is very tight so hopefully it won't rip off

Handy and inexpensive gril

By Ron L.

This inexpensive, easy-to-attach rubber grip is perfect for enhancing the handling of smooth compact cameras like my Canon Powershot S100. It has a small recess on the back that accomodates the tiny useless grip on the camera, and it attaches to the camera with a strong adhesive panel.

Greatly improve the handling of your camera. Many point and shoot digital cameras have no grip and a smooth finish. Even though a camera may be small, it is often difficult to hold and can slip out of your hand.

Flipbac Camera Grips can be easily applied to the front of your camera to prevent slipping and create a solid hold, making your camera more secure in your hand. One-handed picture taking is easier and safer.

The different grips, inspired by the most popular cameras today, have been designed to blend in seamlessly with your camera. Made of 100% silicone, the Flipbac Camera Grips flex to the shape of your camera body for a perfect fit

• Flexes to fit
• Slim Design
• Easy to apply
• No-Mess 3M Adhesive

Join VIP PRO

Earn 2X Points + Exclusive Perks!

Sell or Trade your Gear

Get started in 3 easy steps