Denon AVR-X1600H 7.2-Channel 4K Ultra HD AV Receiver with 80W at 8 Ohms, Supports 3D Audio Formats and Built-In HEOS

2022-12-21T19:00:00

Plugged it in and it didn't function. The styrofoam packaging was broken to pieces and two speaker connections were bent. The packaging effort was atrocious - the box was bigger in every dimension than the unit sandwiched in styrofoam was and there wasn't anywhere close to enough bubble wrap to stop the AVR from bouncing along it entire journey - so dissapointed...

Joel S.

Originally posted at

2022-01-22T19:00:00

Excellent receiver, very easy set up, on screen set up is very helpful. The cardboard mic stand for calibrating speakers was pretty wobbly, but as long as you don?t step into the wire, you will be fine.

Bill W.

Originally posted at

2022-01-13T19:00:00

This thing doesn't even deserve 1 star and the customer service deserves less. I've had nothing but problems setting this thing up. It's so complicated and the directions are USELESS. The remote is a disaster. You can't even see the buttons. They are gray with the tiniest lettering. I hate this thing but it's too late to return it. I'll never buy Denon again.

jdcma

Originally posted at

2022-01-12T19:00:00

Been a long time Denon and Marantz user. Had a relatively recent receiver do the protect mode dance and figured I could update to a new model. I specifically chose an X receiver because I wanted the updated Audyssey software and it does make a huge difference. The non X do the regular Audyssey microphone test in fewer locations but that doesn't really matter. What does matter is the option to offset the dynamic EQ at volume levels lower than reference which isn't an option on regular receivers. This made all the difference because the standard Audyssey programming is too 'hot' on the low frequencies. Meaning too much bass bump which takes away from the audio track. With any receiver you need the dynamic EQ, even in a sound controlled space, to do some light tweaking so you can make out dialogue and music, but then you have the Dynamic Volume which helps tremendously when you watch at normal listening levels when it gets loud (since almost no one watches at reference, almost). The only problem is the dynamic volume causes some ear fatigue with the processing and even in medium and light it's not quite tight or sharp. Enter the Reference Level Offset. This was incredible, it removed that highly processed feel to the sound which means I can now turn back on the dynamic volume and yet bass is not muddy or boomy just tight. I prefer dynamic volume on low and reference offset of +10. Had a lot of trial and error until I found that for my space. So that's the good news. The bad news is, this amp is the least powerful amp they sell. My old amp was 95w+ and this is only 75w. Not important for total SPL it's important for transitions, there isn't that grunt in reserve that I'm used to and if this was a cheap amp that's fine, but it's not. It does make a weird crackle noise when using the app to raise and lower volume quickly which doesn't happen with the knobs or remote or prior denon receivers so that's new. The other bad news is the quick select buttons were removed. For kids who just want to press game and go you can't. You have to either go twist the knob until you get it right or dig up the receiver remote which is silly since that defeats the purpose of the CEC feature. If I were to make a suggestion, Denon should make a stereo or 3 channel (center) amp with all the bells and whistles as this and use that extra space in the chassis for a 100w+ amp per channel. No need for surrounds or atmos or anything. Would prefer just a super high end stereo amp with the Audyssey room correction software.

sethwas

Originally posted at

2022-01-12T19:00:00

quality unit.. very good sound for each of my inputs (internet, blue-tooth, DVD, CD). Setup is not very intuitive, the manual is difficult to follow, and figuring out how to manual set tone, balance, EQ is difficult at best. All the functions are there and work find but it is finding them and understanding how to use them that lacks a user friendly interface.

Bird62

Originally posted at

2022-01-11T19:00:00

The product stopped working within a week of receiving. I am trying to find ways to return the product and get back money.

Senthil

Originally posted at

2022-01-09T19:00:00

Compared to the Yamaha that this amp is replacing the sound is very warm. My favorite feature is the ability to select how varied the loudest to the softest is. I am using the back surround channels for Atmos and the resulting sound is wonderful.

MattSessions

Originally posted at

2022-01-08T19:00:00

The Heos integratio. Is not smooth/smart.. need to select ever time the quality of amazon prime song otherwise will play just in the front 2 speakers.. No wifi, just bluetooth and lose all setups again need to select the songs quality. Alexa and sync to turn on very slow and not simple

Andy M.

Originally posted at

2022-01-05T19:00:00

Had an 7 year old Onkyo that started giving a buzzing sound through the speakers (probably failing power supply). Replaced it with this Denon model. Very easy set up. Sounds great so far.

cmjesquire

Originally posted at

2022-01-05T19:00:00

Awesome receiver... love the internet radio most! Clean output sound, enough connections for interconnevt and easy, intuitive remote control.

Roger K.

Originally posted at

2022-01-03T19:00:00

Great AVR! Works well with the app. Still getting familiar with the unit, but loving it! Can't wait to get it into my home automation.

Ringo1

Originally posted at

2022-01-02T19:00:00

I bought this as replacement to my onkyo receiver that was near 13 years old, for its eARC and WIFI connections. Our media room was not big, this works quite well. Maybe I should have also updated speakers, the bass was good but I would like the high pitch stronger, even with Dynamic eq turned on.

Simone

Originally posted at

2022-01-02T19:00:00

A very good receiver. Plenty of power for a normal home entertainment system with outputs for a secondary audio system. Easy to setup, and calibrate.

Firv

Originally posted at

2021-12-30T19:00:00

This is a really nice tuner. It produces really good power and the sound is really clean especially when the volume is way up. It doesn't sound "muddy" even with the base settings almost all the way in. This was a good choice and looking forward to the addition of wireless surround speakers probably from Denon as well. Overall very satisfied with this tuner.

George S.

Originally posted at

2021-12-27T19:00:00

Upgraded to 4k smart TV but wanted to use existing surround speakers. Unfortunately, my media closet AVR did not support 4k nor ARC and I didnt have digital cable in walls from closet to living room. I purchased the X1600H because it not only supported ARC and eARC but also had ethernet to connect to my network which has NAS and bluetooth connectivity. The setup was simple and the included mic and calibration made room analysis quick and easy. Since the avr is in a media closet, I had to purchase an extension cord for the mic. The X1600H is great for 5.1 movies. Using the 2 rear channels as zone 2 along with the HEOS app allows me to play my music stored on NAS in the other rooms. Very happy with the Denon X1600H.

Rev1

Originally posted at

2021-12-26T19:00:00

I purchased this to replace an older model (AVR-X1100) that was still going strong but had lost its information panel display lighting for the second time. I fixed the problem once before by replacing a fuse but no luck this time around. A big selling point for the 1600 was the phono inputs, which my 1100 lacked. So this meant I could do away with the preamp to my Cable/Sat analog inputs that added more clutter and wires to my setup. I also now have a correctly labeled remote control device selector. I did not get good settings from the Audyssey microphone setup so I did everything manually -- speaker distances and levels, equalizer, and crossovers. Because of my prior experience with the 1100, it did not take me long to come up with settings that sound rich and pleasing while having nice percussive pop and minimal harmonic distortion. (I am sure I will continue to tweak, which is part of the fun.) The major advance between the 1100 and 1600 is the addition of Dolby Atmos and DTS:X. I am not sure that I want to or can add Atmos speakers due to room limitations. I also have a lot to learn about these formats before I can really say if DTS: X will make a discernible difference. This said, movie sound is just as good as on my previous unit and may have even more immersive qualities. My only nitpick is that my go-to Dolby Surround setting for much of the (non-live) vinyl music I like doesn't offer as much flexibility for setting the spatial spread of the three front speakers as the 1100 had. (Why did they change that?) I also wish this receiver had a Concert Hall sound parameter for classical music. I have to tweak the Rock Arena setting for this purpose. These minor issues aside, I am very satisfied with this purchase. I just hope they've fixed that display fuse issue, evidently a common problem on the 1100.

VinylLover

Originally posted at

2021-12-26T19:00:00

Works as advertised. A lot easier than the self-bricking AVR-X 1200H it replaced

Steveybaby

Originally posted at

2021-12-26T19:00:00

Love it! Sounds great especially with Blue-Ray DVD's. I'm able to control it with my Dish Network receiver remote control as far as volume adjustment and on and off functions. I can also control the volume with my Sony Blue-Ray remote. The price is very good for it and the features found on more expensive units are included. I would recommend it to my friends.

Darnell M.

Originally posted at

2021-12-25T19:00:00

I own an AVR-888 and was looking to upgrade it, I ma sad to say that I feel like I ma getting less for the money. Granted the AVR-888 lacks HDMI inputs, but it has sound fields (like my favorite the 5 channel stereo) converts stereo inputs into a surround sound output and it will take an analog video signal, upscale it and send it the HDMI output. For a basic home theater that's fine, for us who wave more and need more not so much. I feel that the AVR-888 is a great device and Denon has always made great products, but I am sending this one back and maybe have someone look at my 888 and see if needs repair..

lowgee

Originally posted at

2021-12-23T19:00:00

Awsome Receiver, updated a Sony that I purchased back in 2011, amazing how technology has changed

Childresr

Originally posted at

2021-12-23T19:00:00

Good quality for the price. Easy set up and good sound.

Pdrfs

Originally posted at

2021-12-23T19:00:00

Really good sound quality. Easy to connect all your home theater system. Easy to use.

Garold

Originally posted at

2021-12-15T19:00:00

This Denon receiver was easy to set up and is functioning as expected.

Tom K.

Originally posted at

2021-12-14T19:00:00

I wanted to upgrade my home theater and needed to replace my 8 year old Sony AVR to accept HDMI's and ARC+ to match my Sony Bravia TV. After comparing Sony, Yamaha, Onkyo and Denon units, as well as advice from my son who is an audiophile and 100% Denon advocate, I selected this refurbished unit. Since I had such success with Sony's refurbished items, I was not concerned about this one. The unit I received was beautiful. It looked new. Set up was easy and I had it up and running and the speakers aligned in less than 90 mins. (easy peasy The integration was perfect. I could not be happier. BUT. 2 weeks later, as we were watching a movie, there was a pop and the was sound but no picture. I finally disconnected the HDMI cable from the Cab/Sat input and installed it on the TV. That fixed the problem. All was well until 2 weeks later. While watching TV, the receiver shut down with a message "Update Error 2A02" It also said to unplug and replug the power cord. The unit did not respond to the power button on the remote nor the power button on the unit. I tried unplugging and plug it back in. The power light would come on, the unit worked for less than 2 minutes then shut down with the same result. At this point I will send it back since it is within the 60 day return and would not go with another refurbished unit.

Chaz49

Originally posted at

2021-12-13T19:00:00

Easy to setup and use. Great sound! Runs my 5.1 with ease. Hoping to expand from there. 4K pass through with excellent picture.

MovieGuy53

Originally posted at

2021-12-11T19:00:00

I finally upgraded my AVR-1603 to the AVR-x1600h so I could get Dolby truerhd & DTS HD Master. The pros: 1) the extra 10 watts of power helps (I watch bluray movies at 36%, Netflix over headphones at 38-42%), and it's got decent bass and crisp details, and things sound a bit clearer and fuller than old AVR. 2) The Audyssey MulitEQ XT helped remove some of the harshness/brightness from my KLH Concord tower speakers (and the Cinema DSP seemed to help that too) 3) The Dynamic EQ & Dynamic Volume helped provide stronger bass, more volume, and it really helps control the overly loud explosions and music in movies for us middle aged folks :) . The cons: 1) at first I had trouble navigating between the different HDMI inputs, and it put the AVR home screen menu on the same HDMI link as my Bluray player so I had 2 "HDMI" inputs. Weird But eventually that problem went away (and I don't have a new Earc tv, so maybe that was the problem). 2) This is more a criticism of Dolby/DTS HD itself, but I'm not at all impressed with Dolby TrueHD or DTS Master Audio (as compared to DTS 5.1.) Whenever I play a bluray movie in Dolby TrueHD or DTS Master Audio it sounds rather dead/flat because all the vocals come out of the center speaker, and you mostly just hear sound effects and music from the other speakers. This also made it harder and more unnatural to hear the dialog - especially when no matter where people are they come out of the center speker. We had to revert to "Multi Channel Stereo" so we could hear the vocals out of more than the center speaker, and to feel like we were surrounded by sound. But Multichannel stereo is a bit brighter/harsher on the ears, so that's not perfect either. 3) it doesn't always turn off my hdtv so I have to use more than 1 remote. Overall verdict: better than my old DTS 5.1 AVR, and the Audyssey is nice, but I don't think it's worth spending a lot to upgrade to Dolby TrueHD or DTS Master Audio. But I was happy to get it onsale here on the Denon website.

Mark M.

Originally posted at

2021-12-09T19:00:00

I use this mostly for streaming with a Samsung 4K TV, Roku and Polk 5.1 surround sound. This was replacement and upgrade for an older Denon model, probably 10 to 12 years old. Only in use for about 2 weeks now. But very happy with quality. My television picture seems more bright and colors much richer. Surround sound markedly different and better...Based on results, I waited way too long to upgrade!!

TobyP

Originally posted at

2021-12-02T19:00:00

The unit works well, except that the WiFi receiver broke in the first 15 minutes of use.

SortaGood

Originally posted at

2021-11-07T19:00:00

After reading tons of reviews I decided to upgrade my Sony DH590. I saw price for a refub and jumped on it after reading of people with positive experiences. Unfortunately, the one I got was a dud. I plugged it into multiple wall sockets that worked and the thing wouldn't even power on. I had everything setup ready for this receiver only to be disappointed. I'll give it another shot buying new and update my review.

Matt90

Originally posted at

2021-10-02T20:00:00

I bought this unit from Best Buy in January 2020, set up my 5.1 speaker system and was very pleased with the quality of sound. However, since June 2021 the USB, Internet radio, Bluetooth and HEOS stopped working! I have reset the unit (to "virgin" status, twice!) as recommended by Denon but this has not solved the problem. This In-Command unit has a 3-year warranty, how do I take advantage of such?

Haber

Originally posted at