


This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Sennheiser Wireless Transmitters
Omnidirectional
Pressure
Pre-polarized condenser
20 Hz - 20 kHz
+/-2 dB: 20 Hz - 20 kHz, 3 dB soft boost at 5 - 20 kHz
Button-hole mount: 20 Hz - 18 kHz, 5 dB soft boost at 5 - 18 kHz
Nominal (+/-3dB at 1kHz): 6 mV/Pa; -44 dB re. 1 V/Pa
A-weighted: Typ. 26 dB(A) re. 20MuPa (max. 28 dB(A))
ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
(A-weighted), re. 1kHz at 1 Pa (94dB SPL): Typ. 68 dB(A)
< 1% up to 123 dB SPL peak
< 1% up to 120 dB SPL RMS sine
Typ. 97dB
144dB (peak before clipping)
From MicroDot: 30 - 40Ohms
From DAD6001: 100Ohms
Up to 300m / 984.24' with DAD6001-BC XLR Adapter
Signal balanced with DAD6001-BC XLR Adapter
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
For full performance: Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power +/-4 V with DAD6001 XLR adapter
Typ. 1.5 mA (microphone)
3.5 mA with DAD6001-BC XLR Adapter
3.5mm
Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
-40 to 45 deg. C / -40 to 113 deg. F
Up to 90%
1.8m / 5.91'
1.6mm / 0.06"
Microphone: 0.5 x 0.2" / 1.27 x 0.51cm
Including Cable and MicroDot connector: 8.5g / 0.30oz










If you need to couple complete invisibility with amazing sound, the d:screet Slim 4061 Omnidirectional Microphone, is exactly what you are looking for. This mic is perfect for your film assignment or for any other situation where you need a completely hidden microphone. The d:screet Slim 4061 Omnidirectional Microphone is flat and short with a cable that runs perpendicular to the sound inlet, ensuring easy mounting and a tiny footprint. When used with the detachable Button-Hole Mount or Concealer, it becomes completely invisible. With sound on par with DPA's classic d:screet Omnidirectional Miniature Microphones, you can be sure that the d:screet Slim will not disappoint.
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
The d:fine, d:screet and d:vote series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
Pristine audio quality
Completely invisible when used with Button-Hole Mount or Concealer
Adapts to all pro wireless systems