
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

This item is no longer available.
The Noise Gate feature on the Tone Tattoo pedal minimizes noise interference, ensuring your performance is crystal clear.
The Scoop Switch on the Tone Tattoo pedal provides two settings of attenuation in the middle frequency range, allowing for full tone sculpting and a tailored sound.
The Out Jack is used to connect the output of the Tone Tattoo to the input of an amplifier or another effects pedal. The In Jack is used to connect the output of your instrument or other effects pedal to the 1/4 inch IN jack on the Tone Tattoo pedal.
The status LED on the Tone Tattoo pedal indicates whether an effect is active. If the LED in the respective section (Memory Toy, Neo Clone, or Metal Muff) is lit, the effect is active.
The Depth control on the Tone Tattoo pedal changes the intensity, or depth, of the chorus effect. You can choose between high and low depth, allowing for a range of sound variations.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Analog
Metal Muff Section:
1x Knob: Drive
1x Knob: Bass
1x Knob: Treble
1x Switch: Scoop
1x Button: Gate
1x Knob: Gate Threshold
1x Knob: Volume
Neo Clone Section:
1x Knob: Rate
1x Knob: Depth
Memory Toy Section:
1x Knob: Delay
1x Knob: Feedback
1x Knob: Blend
1x Knob: Gain
Metal Muff
Neo Clone
Memory Toy
Metal Muff status, red/green
Neo Clone status, red/green
Memory Toy status
1/4" phone jack, input
1/4" phone jack, output
Power jack, input
9VDC
75mA @ 9VDC
5.75 x 4.75 x 2.5" (146 x 121x 64mm)
31.04 oz (880g)
683274011301
Why settle for less when you can have it all with the Tone Tattoo Analog Delay/Chorus/Distortion Multi-Effects Pedal? This compact, all-analog multi-effect pedal is a powerhouse of sound, combining the crushing tones of the Metal Muff Distortion, the lush waves of the Neo Clone Chorus, and the vintage echoes of the Memory Toy Analog Delay.
The EHX Tone Tattoo is our premier fully-interactive, analog multi-effects pedal, designed to satisfy your tone cravings. It delivers robust Lead & Rhythm tones, with full tone sculpting capabilities, including two levels of scoop for a tailored sound.
The pedal features a new Noise Gate for minimal noise, ensuring your performance is crystal clear. With three critically acclaimed effects in one compact unit, the Tone Tattoo is like a talisman for great guitar tones.
The Delay Knob controls the delay time, while the Feedback Knob adjusts the number of echo repeats each note produces. The Treble and Bass Knobs offer EQ control for the high and low frequency response of the Metal Muff, respectively. The Rate Knob controls the Neo Clone's speed of modulation, and the Scoop Switch provides two settings of attenuation in the middle frequency range.
The Blend Knob allows for a mix of the dry signal with the delayed signal produced, and the Gain Knob controls the input gain into the Memory Toy. The Depth control changes the intensity, or depth, of the chorus effect, allowing you to choose between high and low depth.
The Volume Knob controls the overall output volume of the Metal Muff, and the Gate Button enables the gate function of the Metal Muff. The Drive Knob controls the amount of input gain, and the Gate Threshold Knob controls the input amplitude needed to open the gate.
The pedal also features an Out Jack to connect the output of the Tone Tattoo to the input of an amplifier or another effects pedal, and an In Jack to connect the output of your instrument or other effects pedal to the 1/4" inch IN jack.
The Memory Toy, Neo Clone, and Metal Muff each have a dedicated footswitch and status LED to toggle the effect on or off. When the LED in the respective section is lit, the effect is active.
Experience the magic of the Tone Tattoo Analog Delay/Chorus/Distortion Multi-Effects Pedal and elevate your sound to new heights.