
This item is no longer available.
Review Summary
500 each
f/90 at 3.3' / 1.01m at ISO 100, with 48 deg. reflector
115V: 1.45 sec at full power, 0.34 sec at min power
230V: 1.13 sec at full power, 0.36 sec at min power
Full power at t0.5: 1/1,558 sec.
1/2 Power at t0.5: 1/1,395 sec.
5,410K
5.0 f/stops: 1/16 - 1/1 (31 - 500W/s)
Yes
Yes
100W
Yes, +/- 0.5%
Ready light, Switchable audible beep, dimming while recycling
90-260VAC, 50/60Hz
5.0VDC
Sync cord, optical slave, built-in Skyport receiver
Receiver range: up to 393' / 119.79m outdoors, 131' / 39.93m indoors
Fuse
Yes
Yes
26 x 26" / 660.40 x 660.40mm
Square
All Prolinca and Elinchrom flash units since 1974
Included for Elinchrom
22" / 558.80mm
Ranger Quadra heads
Yes
Yes, included
Stand: aluminum
Case: nylon
92.5" / 2349.50mm
34.6" / 878.84mm
3.14" / 79.76mm
16mm / 0.63" Top stud
2.4GHz
16 (8 in Normal mode, 8 in Speed mode)
1, 2, 3, 4
Normal: Limited to the native X-sync of your camera
Speed: For digital medium-format cameras (Max.)
656' / 199.95m for triggering
Foot for camera hot shoe 2.5 mm sync socket
2x AA Batteries
Display
Group and frequency channel
Buttons
On Top:
Group selection, synchronization mode, channel selection, power down, power up, and test
On Side:
On/Off
Channels 1, 3, and 7 are compatible with all enabled EL-Skyport units
Channels 1, 3, 7, 9, 12, 15, 18, and 20 are only compatible with ELC Pro HD and ELB 400
No
Monolight: 10.24 x 7.5 x 5.5" / 260.10 x 190.50 x 139.70mm
Bag: 34.25" / 869.95mm
Transmitter: 3.7 x 2.0 x 1.5" / 93.98 x 50.80 x 38.10mm
Monolight: 5.5lbs / 2.49kg
Bag: 3.2lbs / 1.45kg
Transmitter: 0.14lbs / 0.06kg without batteries
Case: 3.2lbs / 1.45kg
7630006318958