


See Options
2 Year
$289.99
3 Year
$449.99
4 Year
$549.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Frequency: 5GHz
Max data rate: 2400 Mbit/s
Number of chains: 2 per unit
Standards 802.11a/n/ac/ax
WPA3 Passphrase
256-bit AES-CCM Encryption
Dynamic Frequency selection
Auto-negotiation for port speed and duplex
Redundant Protocols (always enabled)
IEEE 802.1D STP
IEEE 802.1w RSTP
IEEE 802.1s MSTP
Primary Node: 10/100/1000BASE-T Passive PoE
Auxiliary Node: 10/100/1000BASE-T
802.11a/n/ac/ax
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3x full duplex and flow control
IEEE 802.1D STP
IEEE 802.1s MSTP
IEEE 802.1w RSTP
IEEE 802.11w Management Frame Protection (MFP)
PoE in (Passive PoE)
PoE in input Voltage 18-28V
Max power consumption 15W
-40 to 167 Degree F (-40 to 75 Degree C)
-49 to 185 Degree F (-45 to 85 Degree C)
5% to 95% (non-condensing)
200km/h
IEC 60068-2-6 Fc (Vibration Resistance)
EN 61000-4-3 (Radiated RFI)
Manufactured in ISO-9001 facility
FCC Part 15B Class A
PCC Part 15C
UV Protected Polystyrene case
Pole/Wall
Primary Node: 10.63 x 22.25 x 3" (270 x 565 x 76mm)
Auxiliary Node: 7.28 x 7.28 x 2.5" (185 x 185 x 63.5mm)
< 2.0@ 5-5.9GHz
Horizontal & Vertical
Up to 13dBi
>20dB
>30dB
5-5.9GHz
13dBi typ.
Dual linear-V & H
37 deg@ -3dB
37 deg @ -3dB
50 Ohm
2 x SMA Female
>20dB
>30dB
2.5: 1 Max. <2
Linear & Vertical
Vertical & Horizontal
8 dBi Vertical
7 dBi Horizontal
5150 - 5875 MHz
4.9 - 5.9GHz Vertical
5 - 5.9GHz Horizontal
Horizontal 360 Degree
Vertical 18 Degree
50 Ohm
-40 Degree F to 185 Degree F (-40 Degree C to +85 Degree C)
90% @ 77 Degree F (25 Degree C)
The EasyLink Pro MP series is a high-speed pre-configured Point to Multipoint Bridge kit that allows for connecting up to 6 sets of remote locations wirelessly up to 1.5 mile away. EasyLink Pro MP's simple setup allows you to connect locations by mounting the hardware, powering them on, and aligning the units using the built-in alignment LEDs.
Each kit contains one central bridge unit plus two/four/six auxiliary units that connect automatically using a highly secure, unique, and hidden SSID and randomly generated passphrase to keep your the equipment secure right out of the box. There is no need for any setup software, just mount, power, and align using the built in alignment LEDs, and you are connected.
Easy
Mount units to a pole or wall using included mount kit
Signal strength LED's for easy alignment
Just power and align using supplied PoE injectors and power supplies
No technical expertise or configuration needed. Simply mount, power, and align units for instant connectivity.
Highly Secure
Encrypted & Authenticated Wireless Connection (WPA3)
Every kit has unique SSID and security settings
Management Frame Protection (MFP) enabled
Hardened-Grade for Outdoor & Harsh Environments
Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
Wide operating temperature range (-40 to 167 Degree F)
Connections up to 2 miles away
https://www.etherwan.com/support/warranty-policy
714-350-7892