See Options
1 Year
$4.99
2 Year
$7.99
3 Year
$13.99
Need help? Ask our experts.
Review Summary
2024-04-02T16:18:43
This is a great option for those who are looking to use two xplor 200s as one light. I have used it for a few photo shoots and it has worked great. My only complaints about this unit is that the tilting mechanism is very clunky. I wish this had the same tilt mechanism as the xplor600pro. The other issue may be just my unit but trying to tighten this to a c-stand seems to not work all too well. It wobbles back and forth a bit but it does not fall off.
Daniel M.
2024-03-18T05:00:24
It works as advertised. My only complaint is that the stand mount feels a little flimsy and it doesn't adjust as smoothly as my other bowens mounts.
Karla D.
2023-12-19T11:17:48
The item works as advertised!! Love it!!
CHARLES M.
2023-08-30T09:32:49
I love the concept of this product and I think it's pretty unique and very useful if you have more than one light and are looking for versatility. For an operational point of view it is super simple and straightforward, it works smoothly.
GIOVANI B.
2022-12-29T19:32:03
Love it now I have 400 watts strobe light
Brandon N.
2022-12-14T07:22:01
This is a very handy jig to combine 2 strobes into one. I've only used it once, but it did the trick! I would recommend.
David K.
2022-12-13T02:05:37
This is a very well made mount to hold 2 - eVOLV 200 Pro TTL flashes. Enables you to get 400WS with the 2 flashes. It only takes a few minutes to assemble and is very sturdy once it is done. Highly recommended.
WILBER B.
2022-05-17T15:36:30
Well made, easy to use. I think it's a great product if you have 2 ad200 lights (works with 1 godox and 1 flashpoint too!). You can easily double the power of a single ad200 with a standard Bowens mount. It's not so heavy and it has 2 led lights good for indoor illumination before the shoot. Be aware that you can use one or two bare bulb light only (not the other modifiers).
FABRIZIO G.
2022-04-19T11:01:08
Brilliant solution. It has been working out great.
Ryan S.
2022-04-01T23:26:34
Haven't used it much but works like it should
Joe N.
2022-03-17T16:09:45
Double the power of the AD200, by using two in tandem. When using them, they feel almost as powerful as an AD600.
Thomas A.
2022-03-13T11:50:22
This allows me to use both my AD200 Pros but I wish it had a cover so I could leave my bare bulbs installed. Other than that, this thing is great.
TERESA A.
2022-01-16T08:08:32
Flashpoint products never disappoint.
Clavel D.
2021-12-14T18:57:02
Awesome accessory! Now I can leave my 600 at home for most of my work. Cool to be able to use both my 200's for 400w! Well made and saves me room from having to carry another strobe.
CHRIS H.
2021-12-09T17:57:06
Great accessory for my two AD200's. Now I have an alternative if I ever need 400watts.
David C.
2021-09-13T14:57:40
Flashpoint eVOLV Dual Power Twin Head with Bowens Mount (AD-B2)
DO D.
2021-06-14T10:40:50
This is a very useful item for photographers that have 2 eVolve AD200 flashes and need to double the power. Not sure why Flashpoint would make a product that would hurt the AD400 Pro unit, but I am glad they did. I can use my eVolve AD200 units separately or as one which gives more flexibility in lighting than a single AD400 Pro. Well made and I like that it accepts all my Bowens accessories like reflectors and softboxes. Also it has two bright modeling lights that are useful for video or portraiture.
Kevin C.
2021-06-07T11:16:11
Perfect fit for the GODOX AD200?s.
TERRI T.
2021-04-22T09:56:59
It?s very versatile and well built. Perfect for both of my evolve 200s! 400w is a great thing to have when I don?t need 2 flashes. Also, when I need a bowens mount adapter, this comes in handy as well because you can put a bulb in the middle. I have no regrets buying this!
JOSE V.
2021-03-30T08:24:19
Works great! Love it!
Eddie M.
2021-03-20T19:39:49
It works and I guess if you only had AD200's and needed a brighter key light once in a while, this would fill the void. I have 200's and 600's so I never use it.
ROY P.
2021-03-02T07:46:41
No complaints so far. Does work as described. It can also work with protective sleeves on the ad200 units. I wasn’t sure at first and thought I would have to remove in order for both to connect at once.
Jeremy N.
2021-02-27T04:51:02
I'm very happy with this product and I used it a lot since it was purchased. User friendly and very useful form my little photo studio.
TAMARA B.
2021-02-26T15:19:00
Great product!
Brenda G.
2021-02-21T07:05:51
Excellent piece of hardware. A must have if you own (2) ad200 strobes
BRYON R.
2021-02-08T13:22:14
I often use this with a soft box or umbrella. It functions equally well with one or two AD200s attached.
DOUG L.
2021-02-07T07:12:27
If you have 2 Flashpoint eVOLV AD200Pros and want to use them as a higher power studio light, just pick up this bad boy. Putting both together gets you just 1/2 stop less than an AD600. Sturdy build quality, built in Bowens mount and the capability to use one or two AD200s. A must for anyone who wants a convertible system.
DAVID H.
2021-01-27T18:16:18
This is a very high quality and reliable way to mount 2 AD200 flash units for use with Bowens modifiers. I supposedly get double the power and it's the best way to put these on a light stand and not worry about them.I do feel that the power is significantly less that an equivalent monolight using the same reflector, and suspect the bulbs are too long. The angle of the light output is more like 150 degrees. So, it's a mixed bag. I'm going to try a longer reflector .
wendell m.
2021-01-12T07:36:24
Works great. Built great. The tilting mechanism good be better. Overall I am very satisfied.
Thomas A.
2020-11-15T08:00:53
400w of power. Used main as my main light.
Outlaw A.
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Flashpoint R2 (XPLOR) Series
Black
No
1
Single Head
TTL
Bowens S Mount
LED
8.625x6.0x2.75" / 22.0x15.2x7.0 cm
1lb 13oz / 820g
840014177080
2 things- still 5 stars.
By RICHARD Z.
Amazing accessory! The only 2 things I would change. The clicking adjustment hinge. Can’t dtand that. The Flashpoint Pro strobes got it right. And I can’t think for the live of me why this didn’t come with a cap that fits over both bulbs. They knew what bulbs would be used. Make a protective cap! Otherwise stellar product.
Must-have addition if you own multiple Evolv200/AD200 flashes.
By Tim P.
Very handy addition to the Evolv200/AD200 flash units. The Flashpoint and Godox flash units are essentially identical, and both work with the AD-B2 Twin Head. I own both. The flashes snap into the twin head easily, and when used together they give you a very powerful flash! For me a useful feature is the surprisingly powerful modeling light built into the twin head. It is powerful enough to light your model indoors and give a good preview of what your final image will look like. It uses 2 ...
View full Review
Turn your eVOLV200 R2 Pocket Flash into the next level of intelligent strobe life!
Flashpoint introduces the eVOLV Twin that joins two eVOLV’s to create a 400ws head with brilliant LED modelling.
The double header is more than just a power hitter. All you have to do is plug the original flashtubes from your two eVOLV’s into the Twin. Simply remove the modular heads from the eVOLV’s and slip lock the eVOLV200 bodies into the channel on the Twin and twosomes your power pleasure.
The Twin bracket has a light stand receiver with a tilt lock that is ready to attach to any 5/8” stud or light support. You now have a standard Bowens S-type friendly bracket head for all your essential modifiers; reflectors, softboxes, Parapops or snoots, and an umbrella shaft channel. You don’t need two eVOLV’s to take advantage of the 2X 20w LED modeling feature. Just one body will power the lamp with one barebulb inserted.
But, with a duo headed eVOLV200, you can have a real blast!
The eVOLV200, with the heart of the world famous Streaklight 360 TTL and the soul of the ever popular XPLOR 600 TTL, is now compatible with R2 Canon, Nikon, Sony, Fujifilm and Olympus/Panasonic camera systems. The compact and efficient solution for travel, easy setup with the reliability of the Flashpoint R2 Wireless System. Never before has off camera lighting been so user friendly and masterful. It will change the way you harness your camera’s technology.
Now, twice as nice.
http://www.adorama.com/g/ourbrands
212-647-9300