















See Options
1 Year
$4.99
2 Year
$7.99
3 Year
$13.99
Need help? Ask our experts.
Review Summary
2024-12-31T22:19:43
It was a huge benefit to be able to take the weight off the top of the stand and boom arm by using this extension. As a tip to fellow photographers, make sure the bulb is completely inserted into the extension flashhead every time you use it because my bulb fell out while I was setting it up on the flash stand. For future products, they should consider a locking mechanism that keeps the bulb from loosing or falling out. Otherwise, I would give this 5 stars.
Victor H.
2024-11-24T07:25:48
Loved it. Just as advertised. It is light and strong with plenty of lead and avoids hefting the X600 into the air.
KELVIN H.
2024-10-22T10:08:28
works perfectly shipped promptly package delivered with no damage and no issues
JAMIL S.
2024-10-19T14:50:50
I shoot a lot of Real Estate and this allows me to throw the 600 over my shoulder in a fitting case while hand holding the flash head and bouncing off ceilings and walls. It can't be beat. And, when in the studio or on location, I don't have to have my 600 on the stands, just the head. No worries about it falling to the floor.
JERRY J.
2024-03-24T21:34:49
It's ok. It does the job, but feels a little flimsy.
John D.
2023-06-13T12:58:26
This product is a necessity. Putting a 7lb unit high on a stand or boom is an invitation to disaster. It's inexpensive and will lessen your liability insurance.
Don V.
2023-04-27T22:26:02
These are great, a must-have if you're planning to use them on a C-stand or in a studio. I like to fire my lights from high up and wouldn't be able to do that with just the main lights which are heavy. I added 4 stars because the handle to rotate it up and down broke off. Down the road, I'd also suggest getting the AC battery adapter and an extra light bulb.
GIANO C.
2022-12-14T07:43:43
Having this extension gives me the ability to raise my modifiers higher. Also, if I need to change any of the settings on the unit I don't have to worry bringing the unit down to chases batteries or make adjustments. Best of all I can keep the modifier in place without worrying about it leaning over too far because of the weight of the unit.
Bill C.
2022-07-14T11:39:04
For the first six months or so, I only used my new XPLOR600 at low power in my basement product photography studio, because I was afraid of knocking over the carefully sandbagged and balanced stand if I even tried to move it. Once I got Flashpoint extension head, it changed everything. Instead of having to balance the weight of the whole unit at the end of a boom arm, I just have to worry about this extension head and the modifier, which weigh considerably less. The rest of the unit is placed near the base for a much lower center of gravity. The carry strap and bag makes it much easier to use on location, where XPLOR600 is invaluable when trying to overpower the sun. This has made my XPLOR600 orders of magnitude safer and more useable!
JOSEPH B.
2022-02-10T09:07:06
It is a great investment. It is almost an insurance policy for your strobe since if it falls and breaks it only costs a fraction of what the strobe itself costs. It works very well, just as expected.
PAUL J.
2022-01-30T11:14:55
This made using big modifiers 10x easier! No more worries about damaged lights if it falls? this flash head extension is a lifesaver!!
NATSON T.
2021-12-27T21:10:07
This is the perfect accessory if you're looking to use the 600W light as a hair light or looking to shed some weight off a light stand. The last thing anyone wants is to risk a heavy light falling onto a subject, product, or the ground for that matter. This is where this little gem comes in handy!
Christopher C.
2021-12-14T19:53:02
Great addition to d not put many weight in my boom arm
DAVID S.
2021-12-01T10:25:35
This is a must of you own the XPLOR 600. It comes with carrying case for portability. Excellent value.
THOMAS W.
2021-09-30T17:24:53
Quite convenient. Works well. Much less precarious when mounted to mods.
JOHN S.
2021-07-27T08:43:02
Work as advertised and provides reduced weight at top of light stand. I would prefer the newer style pivot mount without the ratcheting but this does work ok.
FRANK T.
2021-05-28T07:28:24
Comes with a great carrying case that can be used to carry the battery when in the field.
NATHANIEL P.
2021-05-14T08:25:07
Great tool
Outlaw A.
2021-04-15T08:57:29
Great tool. I wish it was longer
ABRAHAM P.
2021-02-04T12:50:39
The Flashpoint 600ws Extension FlashHead is awesome. It removes the fear of the Xplor 600 flash unit from crashing down on the subject or object you are photographing. I think it is a must for any photographer who is hanging lights up high or above things.
GORDON L.
2021-01-06T18:01:26
I have been very impressed with this sturdy strobe light extension kit. It is the main reason I got this light, so I could mount the power pack down low on the light stand and make this a lot less top-heavy. It weighs just 11# along with the light-stand and small reflector. I feel I could easily carry this around with me at a crowded event and not worry so much about getting knocked over.
DAVID R.
2021-01-06T08:27:15
Outside of clamp handle that hits the head when you adjust the angle of the head it's a great product. The handle does have the ability to be pulled away from the head to clear it but I think it would be good to change the handles angle just enough to clear the head without having to pull it away from the head. Minor detail. Using on my Glow profund parabolic with the focusing rod takes a great amount of weight off the setup and lessens the need for counterweights. I wish the cord was a longer but you just need to keep the mono light within the length of the cord. So far loving the Flashpoint products.
CHARLES L.
2020-12-15T08:06:47
This bad boy stops my expensive xplor600 from hitting the ground and ruining my session. Very lightweight, easy to setup and even includes a pouch for the body of your strobe to hand off to your lighting assistant. I’m not trying to carry that thing around. That’s what I pay them for
TYLER S.
2020-12-10T09:21:45
This extension change the game of my heavys modifiers, before I got to use a 10 pounds sand bag in counter balance in the boom, and with lighter modifiers now I can extend it longer than never!! and also with the carry on bag with strap my assistance can deliver the 600 watts power with the boom hand pole with a bigger modifier!!
Miguel N.
2020-11-24T21:33:00
Your back and lighting assistants will sing praises if you use this extender. I never shoot outdoors without it. Attach the 600 to your lower light stand for more stability.
erskine i.
2020-11-11T11:37:14
I use this to take the weight off the top of the light stand/boom arm. and then i use a super clamp to attach the light body to the base of the light stand and add more stability (still add additional weight just to be safe)
Erick J.
2020-10-14T11:08:40
If you are using small footprint stands (C-Stand and similar) this is a must have, Don't take risks, get one.
Guillermo S.
2020-09-17T08:32:41
This product makes things so much easier when attempting over head shots. I Love It.
MARK G.
2020-07-15T08:37:04
Makes a huge difference with heavy modifiers
BECKY D.
2020-06-11T10:19:28
Great extension it helps a lot, This way I don't put weight on the top of the stand and prevent flash to fall. also have other uses.
Arnaldo T.
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Flashpoint R2 (XPLOR) Series
Black
No
1 Head
Single Head
Bowens S Mount
Cable length
8 feet / 2.44 meters
2lb 6oz / 1.7kg
840014141975
This remote head works!
By Ron S.
For the price - this is a great option if you ever put the light up high on a stand or on a boom. It is smaller and of course lighter by a LOT. Keeps the modeling light function also. Kit comes with a bag to hold the main unit with a shoulder strap. So it would well if you have someone hand holding a light for you. It makes that operation safer and much less fatiguing as most of the weight is now on the should bag.
The perfect addition.
By Tommy C.
This extension is awesome. Feels solid, high quality. Price was great for what you get. Comes with carrying case/bag for main unit so you can sling over your shoulder, or hang on your stand for weight like a sandbag. Then you only have to worry about the weight of this extension head plus what softbox or umbrella you use. Much more manageable than full unit up on 8 ft stand. Has bowens, or others I imagine, mount just like main unit for easy attachment of modifiers. Apart from weight and mana...
View full Review
The Flashpoint XPLOR 600ws 8 foot extension head transforms the XPLOR600 series monolight into a boom friendly powerhouse, perfect for use with softboxes or as a gridded hair light. Connects simply to any XPLOR by unplugging the glass shielded flashtube from the XPLOR monolight body, locking the pronged cable link in place and then inserting the original flashtube on the head extension sockets.
Included with this item is a zippered soft case and shoulder strap that provides secure housing for the monolight body specifically for extension head implementation. The case is great for hanging on a light stand or on the move with a lightman while offering protection from the elements. To make it even more practical, there is a window for constant monitoring of the XPLOR LCD display panel with access to the control buttons.
The lightweight remote head is then acting as an extension cord between the strobe and remote flash tube, easily enabling remote, difficult to place precise lighting. You don't give up the convenience of an umbrella holder, a free moving 180 degree tilt lock, and all popular Bowens style mount light modifiers that fit directly on the monolight extension heads.
Adds 8 foot of lightweight extension from the monolight, 180 degree tilt Bowens mount remote head
Useful for boom mounted light modifiers, Enables remote hard to place light positioning
http://www.adorama.com/g/ourbrands
212-647-9300