
Review Summary
2022-09-26T08:24:44
Just works
Keith M.
2019-11-26T12:41:55
very little thing but very very big help in shooting proces, very nice product
Yervand P.
2019-09-24T14:37:28
Great product
Ariana z.
2019-08-24T16:57:00
This adapter is quite useful when I have my camera on a tall tripod. It angles the R2 Pro Mark II transmitter display and controls so they can be seen when located above eye level. It does increase the height of the setup from about 2-3/4" to about 6". Quality materials were used and this should last a long time, but it also suffers from a lack of quality control in the manufacturing process. Mine had a locking ring that would not turn due to excessive flashing on the plastic parts that could easily have been removed during assembly. Most purchasers would have thrown this adapter away and purchased an new one, but I did persevere and got the defect cleared away with required patience by means of an Xacto knife.
Bruce B.
2019-08-09T06:27:52
great little device , does it's job. super light too
TED K.
2019-07-27T02:17:14
It does what it's supposed to
NIRVESH J.
2019-06-28T08:40:59
This is a great product and addition to the R2Pro II trigger. It actually allows you to see the LCD at various camera angles which was virtually impossible without the vertical hot shoe adapter. It does add height to the trigger, but in studio on a tripod... and in most instances hand held, this does not present any issues. Highly recommend for the R2 Pro II trigger.
DONALD R.
2019-06-06T17:59:48
haven't used this item yet and not sure it's really necessary
Diane A.
2019-06-06T08:42:09
The hot shoe adapter for the flashpoint XPro trigger works well especially when the camera is on my tripod.
Shawn B.
2019-05-28T14:07:48
Came with the transmitter for free.If I ever need it ok but probably will sit on the shelf for good
WAYNE F.
2019-05-28T10:21:11
great addition to my remote lighting system
KEN T.
2019-05-21T10:08:30
I've used it a few times since I got it. Works well, no problems with it. Smaller than I thought.
GERARDO C.
2019-05-08T08:29:02
I give it a 10... This is a basic product. sort of one of those things that works or doesn't... in this case it works. mounts well and the unit mounts to the camera well... the maker should be proud.
joe g.
2019-05-06T12:07:07
Ingenious and simple device to improve visibility of XPro and Flashpoint trigger devices.
ROBERT P.
2019-05-05T15:45:01
Really great for studio work especially if you’re short like me and the camera is on a tripod. I was able to leave the step stool in the truck and have more room to work in the on location studio space.
JOSEPH S.
2019-04-16T11:21:10
Works great! Makes it a lot better to see the transmitter without standing on my toes!
John Q.
2019-04-06T20:47:03
It works! It's listed as Canon, but I use it on the Lumix G9 and GH5. The pin placement is close enough that it works and allows me to see the display on the Pro transmitter when the camera is on a tripod without repositioning the camera or bobbing my head.
JON Y.
2019-04-04T19:43:06
If you are shooting from a trupod a lot AND you are less than 7 feet tall, get this little contraption. It works very well
NICOLAS K.
2019-04-04T13:20:53
The product is of good quality, and nice manufacturing, but I wish the design of the flash unit would have been to make it more upright when it was designed, then this part would not be needed. It works fine but is way to tall and gets in the way.
The Z.
2019-04-04T07:43:45
Very good!
sanjay k.
2019-04-03T11:00:08
Worked exactly as expected and even made my R2 Pro Mark II perform better
RANDALL H.
2019-03-30T04:20:30
This little gadget is a no brainer makes it so easy to read your remote.
ACCOUNTS P.
2019-03-27T10:49:07
Works as intended
Christopher R.
2019-03-13T13:07:22
This unit makes use of the remote controllers much more viewable
richard b.
2019-03-05T08:00:01
Great at less than less than half the cost of the camera manufactures brand.
joseph s.
2019-03-03T07:50:37
The hot shoe extension works and is an asset when needed. With the R2 Pro II trigger for me it is a bit of over kill unless I have my Camera on a tripod below eye level. It is early yet as I have only had it for a couple of weeks and only using it with Canon speed lights. Have ordered Flashpoint 400 pro but it has not arrived as of yet. Looking forward to using high speed sync with the aspen trees in Colorado this year.
Rudy P.
2019-01-28T18:48:53
Works as advertised with my Canon ST-E3-RT Speedlite Transmitter. Had some instances where the selected flash would de-select itself (as if the shutter were half-pressed), but likely a pin connection issue. Tapping the connection a bit solved it.
SCOTT S.
2018-12-24T08:13:10
This is a great addition to the Flashpoint lighting system. It works as advertised and is of high quality. The XPRO triggers should have been designed initially with this angle of view, or at least an adjustable angled display. This is a good, low cost, solution.
Mel C.
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
1.9 x 1.4 x 1.0in / 49 x 36 x 27mm
1.4oz / 40g
192223021280
great product
By Yervand P.
very little thing but very very big help in shooting proces, very nice product
flashpoint vertical adapter for TTL Nikon
By TED K.
great little device , does it's job. super light too
The Flashpoint Vertical TTL Hot Shoe takes that wireless remote atop your DSLR hotshoe and stands it up. The LCD panel faces you directly. The TTL friendly shoe relates all camera information to the attached remote. The shoe will forever keep you from craning your neck to get an overhead view of the display screen. What a welcome and straightforward solution for tripod work and high point-of-view sets to your remote possibilities.
1. Slide the remote fulling on the Vertical TTL Hot Shoe and lock it firmly in position.
2. Attach the assembled Vertical Shoe with remote onto your DSLR and lock it into the hot shoe by turning the knurled lock wheel counterclockwise.
3. All the camera data flows through the shoe to the remote - and back again.
Another exclusive custom photographic tool designed and created by the innovators at Flashpoint.