


Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
UHF
B2 538-554 MHz
B3 554-570 MHz
32 Channels / 640 Selectable Frequencies
30 mW or 100 mW
Under Typical Conditions 300' (92m)
Note: actual range depends on RF signal absorption, reflection, interference and battery characteristics
+/-1dB 45Hz - 18kHz
< 0.7% at 1kHz
>105dB
+/-68kHz
>90dB A-weighted
Range: 14 to 122 deg. F (-10 to 50 deg. C)
EIA STANDARD 1/2 U
FM Stereo Modulation
30mW or 100mW
+22dBV
6dB
2x Line Level, XLR / 1/4" Combo Jack
Balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
2x 1/4" Unbalanced Jack
12VDC at 500 mA supplied by external power supply
100 mW
6dBMuV, S/N>60dB at 25 deviation (mono)
45dB (at 1 kHz)
1/8" (3.5mm) Stereo Earphone Connector
2 "AA" size alkaline or rechargeable batteries
About 7 hours (alkaline)
20Hz to 20kHz
Dynamic
16 Ohms
114dB/mW at 1kHz
Less than 0.3%
Over 4 and a 1/2 foot, 58" (147.32cm) with Dia. 1/8" (3.5mm) stereo plug
Transmitter: 1.7 x 8.2 x 8.1" (4.32 x 20.83 x 20.57cm)
Receiver: 4.25 x 2.6 x 0.87" (10.80 x 6.60 x 2.21cm)
Transmitter: 2.3 lbs (1.04kg)
Receiver: 0.35 lbs (0.16kg) Without Batteries
Ear Buds: 0.21 oz (5.95g) (excluding cable)
The AS-1800 is designed with features for the professional.
- AS-1800T Transmitter -
The transmitter allows the user to select from 640 frequencies or 32 channels and a has XLR/1/4" combination inputs, 2-1/4" Line Outputs and selectable 30 or 100 mW transmitter output. The transmitter (AS-1800T) can be programmed with the name of the user, so it is easily identifiable to see which transmitter is for each performer. The AS-1800T also allows the user to change between name, frequency or channel on the display. There is a sensitivity selector for the transmitter input to match low and line level inputs.
- AS-1800R Body Pack Receiver -
The receiver (AS-1800R) is built for the toughest conditions. It is constructed from Magnesium alloy, features diversity antennas, 150mW headphone output and Mixed Mono Mode. The LCD display shows channel number, frequency and battery status. The Mixed Mono Mode allows performers to adjust the balance of the Left and Right audio signals sent from the transmitter directly on the body pack. With Mixed Mono:
1. The performers can have their vocals in Input 1 and the band mix in Input 2 and adjust the volume of each independently to create their own personal mix, or
2. You can send two different monitor mixes from the board so each performer can decide which mix they want to hear on their belt pack
- EB6 Ear Buds -
The EB6 features a single driver delivering full frequency performance. The EB6 has a cable over 4 feet long and the ear buds weigh 6g (less than 0.25 oz; excluding cable). The EB6 includes a durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large).