HDfury PRO UHD 4K HDMI Splitter with USB Cable

HDfury HDMI Splitter Features

• Our Splitter 4K UHD handles all video formats down to SD (480p) and all the way up to UHD (2160p)
• Independent Upscaling and Downscaling engine embedded with 3 modes set on-the-fly via slide switch
• 1080p24/25/30 to 4K24/25/30 or 4K24/25/30 to 1080p24/25/30, all others formats pass-through
• Up to 4K30 4:4:4 or 4K60 4:2:0
• 4K Image Enhancement mode with an easy one button control
• Improved EDID Management solution with either a Custom uploaded EDID, Self generated Automix EDID or a Fixed basic EDID
• AutoMix EDID feature will create a custom EDID by mixing both sink EDID connected to the splitter output ports
• Custom and manual EDID utility available from the download section
• Featuring a smart reset switch so you will never have to unplug and replug HDMI cable again, just press the reset button and HPD events is reinitialized
• Just like any recent HDfury hardware, it comes with USB upgradable firmware that allow you to unleash furious features
• 3 GHz Repeater with 4K2K Super Resolution Engine (SRE)
• Video Scaling and Audio Re-Timing
• DVI Specification 1.0 Compliant
• HDMI Specification 1.4a Compliant
• Integrated HDCP decryption/encryption engines which are compliant with HDCP Rev 1.3 specification
• Integrated automatic EDID processing
• Wide Frequency Range: 25MHz - 340MHz (beyond 4K spec)
• Supports 12-bit Deep Full HD, Full 3D and 4K2K video
• Supports Standard Audio, DSD Audio and HD (HBR) Audio
• Supports 1 DVI/HDMI input port and 2 DVI/HDMI output ports
• Supports conversion of HDMI signaling to DVI signaling
• Supports HDCP Repeater
• Scalable to make more than 4 output ports
• Supports 2D and 3D video signals in NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p/1440p/2160p