This item is no longer available.
Review Summary
2022-08-26T02:43:41
Recently purchased the Comica CVM-WM300a wireless set. The built is high quality. The receiver and transmitters packs are not plastic. Right out the box the transmitters sync to the receiver after turning them on. The signal is clean..no dropouts. The sound is higher quality. I would have preferred if the antenna s were removable and the mikes were smaller. Fort the price it?s well worth it.
GREGORY W.
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
>65dB
96
<0.5%
Approx. 10 hours (standby)
Built-In Lithium-ion battery
3.7V 2000mAh per unit
120m (393.70') unobstructed
80m (262.46') with obstruction
Group A: 520 - 548.5MHz
Group B: 550 - 578.5MHz
3.5mm
3.5mm
-95dBm
<20ms
<-60 dBc
10dBm/15dBm
32 to 122 deg. F (0 to 50 deg. C)
-4 to 140 deg. F (-20 to 60 deg. C)
3.3 x 2.5 x 0.9" (8.38 x 6.35 x 2.29cm)
7.4 Wh
6971120980333
The CVM-WM300A is a dual-transmitter and receiver wireless microphone kit from Comica. This kit runs on built-in rechargeable lithium-ion batteries and has a maximum range of 120m.
To begin using this kit, take out the transmitters and receiver and check the battery charge on each unit. On the transmitters, use the large switch on the side to designate which unit is the A unit and which is the B. Then, you can either assign each a channel manually or use the IR search function to allow the transmitters and receiver to identify which channel has the least amount of interference and automatically assign themselves to that channel. Attach each unit to the user via belt clip, camera cold shoe mount or an accessory arm via the 1/4-20 mount on the back.
Next, attach the included lavalier microphones to the two transmitters and clip them onto the subjects. Use any of the three included adapters to attach the receiver to the camera, speaker, mixer or recorder that will be receiving the signal. For real-time audio monitoring, headphones can be inserted into the receiver, next to the Line Out port. Take a test sample of the audio and begin recording! When you are done, the entire kit and all of its accessories fit neatly into the included hard case.