Ikan MS-PRO Beholder 3-Axis Handheld Gimbal Stabilizer with Encoders & MPA70 5-Section Aluminum Monopod Extension Kit

MS-PRO-MPA70-KIT
Looking to expand your creativity? Combine the iKan Beholder MS-PRO with a strong, lightweight and portable quick adjust monopod. Take your 3-Axis gimbal to a whole new level.

• Over 360 Degree Movement from Yaw Axis
• Works with Mirrorless and Point & Shoot Cameras up to 1.9 lbs
• Equipped with 3-Axis Gyro Stabilized Brushless Motors
• Equipped with 32-Bit Controller & 12-Bit Encoder

MPA70 5-Section Lightweight Aluminum Monopod for Photo & Video
iKan brings the strength of a tripod to a compact, lightweight and portable quick adjust monopod with the best versatility in its class.

• 5 Sections with Twist Lock for fast adjustments
• Double-Sided camera screw with a 1/4"-20 and 3/8"-16 thread

Jib/Operator
Mounting a Beholder to an MPA70 monopod adds stability, control and delivers a natural feel when operating a 3-Axis gimbal. No jib? No problem. By extending the iKan Beholder out on the monopod, you can create jib-like shots in a matter of seconds with no extra gear or complicated setups.

Drone Style Shot
Shoot among the trees in a drone-like fashion by raising your iKan Beholder on the MPA70 monopod. Give your shots the look of a drone without the risk of flight and record usable audio without loud propeller noise.

Extraordinary Range
No other monopod in its class has the ability to collapse down to 18.8" & expand up to 70.8" while supporting a payload of up to 35 lbs.

Perfect Match
The MPA70 pairs perfectly with iKan Beholder gimbals such as the EC1 or MS-PRO to expand your cinematic creativity, Simulated drone shots, jib shots and comfortable low angle shots can now be achieved using the monopod.

Strength Meets Portability
Constructed out of aluminum and weighing only 1.59 lbs., the monopod is still light enough not to weigh you down.

Twist to Lock
The MPA70 expands through 5 different sections. Each one features a twist lock knob for quick height adjustments.

Flip & Mount
The base of the monopod contains a 1/4"-20 screw that can be flipped around and converted into 3/8"-16.

MS-PRO Beholder 3-Axis Gimbal Stabilizers with Encoders
The Beholder MS-PRO is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.9 lbs. The Beholder MS-PRO is lightweight, easy to use and can be carried in your camera bag. In addition, the MS-PRO is versatile enough to be used with a GoPro or Smartphone.

• Durable all aluminum construction
• OLED Display screen to show operating modes
• Lithium battery powered - low maintenance, eco-friendly

360 Motors
The MS-PRO features a 360 degree rotating brushless motor on the yaw axis for less restricted movement.

Advanced Stabilization
Using a 32-bit controller with a 12-bit encoder, the MS-PRO uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier and have a greater battery life.

Multiple Follow Modes
The MS-PRO features 3 different follow modes. In Yaw-Axis Follow Mode, the MS-PRO will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the MS-PRO will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt and roll.

Designed for Mirrorless Cameras
With a payload of up to 1.9 lbs, the MS-PRO has the ability to stabilized a wide range of today's popular mirrorless cameras such as the Sony a6300, Sony a7SII, Panasonic GH5 and even cameras as small as a GoPro or smartphone.

Lock Mode
In Lock Mode, the Yaw, Pitch and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Auto Inversion
Switch to inverted mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.

OLED Status Display
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Easy to Use
With a newly designed quick-release baseplate system, the MS-PRO is easy to balance without the need of any tools.

Multiple Mounting Options
The MS-PRO handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the SPRO to a tripod, jib or dual handle support system such as the iKan DGH.