Tilta Panasonic S5 Kit C - Black

This kit of the Panasonic S5 cage will help to fully build out your setup. It includes: the base Panasonic S5 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as 15mm rods for the plate), a 15mm single rod mount that attaches directly to the cage, an HDMI to micro HDMI cable, a clamp to attach a USB-C cable comfortably to the cage, and finally the Tiltaing Side Power Handle with Run/Stop (F570 Battery) along with the compatible Panasonic S series R/S cable.

- Full Camera Cage for Panasonic S5 -
This "full" camera cage provides complete protective armor for the Panasonic S5. It provides several 1/4"-20 and 3/8"-16 mounting points as well as three cold shoe mounting points and a rosette connection on the left side to allow for the attachment of a side handle.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

Top
The camera cage has reserved space for 1/4"-20 threaded holes, as well as uniquely designed NATO rail and cold shoe mounts. Compatible with top handle, side handle, etc.

Portable Flathead Screwdriver
The portable screwdriver can be attached to the bottom of the camera cage via its magnet. The bottom plate has 1/4"-20 threaded holes which support Manfrotto and ARCA quick release plate.

Easy Access For Quick Battery Swaps
Reserved space for easy access to the battery chamber. Quick and efficient.

Quick Release Top Handle Included
The cold shoe mount has built-in locating points. The threaded mount supports quick and secure mounting.

Shoot Faster
Slide into the cold shoe mount using the 1/4"-20 locating hole. Tighten the tie down to complete the assembly.

Rotatable Top Handle (Optional)
The dual cold shoe design with 1/4"-20 threaded holes supports expansions. Press the top release button to rotate 90 Degree .

EF/ PL Mount Lens Adapter Support (Optional)
Securely mount heavier lens setups using standard EF or PL mount lenses.

Various Ports Meet Your Expansion Needs
Attach various accessories to your setup using the 1/4"-20 and 3/8"-16 threaded holes, cold shoe mount, NATO rail, rosette mount, etc.

• Cold Shoe
• NATO Rail
• Rosette 1/4--20 Extension Mount
• 3/8"-16 Threaded Hole

Features
• Protective Armor: For Panasonic S5 Minimizes Wear and Supports Many Accessories
• Mounting Points: Include NATO Rail, ARRI Rosette, Cold Shoe, 1/4"-20 and 3/8"-16 Threads
• Compatible: With Type II Baseplates and Quick Release Plates via 1/4"-20 Threads
• Portable Screwdriver: Connects to the Bottom of the Cage via a Magnet
• Lightweight & Durable: Aluminum and Steel Construction

- Quick Release Top Handle -
This quick release top handle easily and securely attaches to the top of the half and full Tiltaing camera cages.

It provides several 1/4"-20 and 3/8"-16 mounting points as well as one cold shoe mounting point on the front and one on the back of the handle.

A 15mm horizontal rod mount is built into the handle to allow for various rigging possibilities such as mounting an EVF or external monitor via a 15mm rod.

Features
• Universal: Compatible with Most Tiltaing Cages
• Secure Connection: Via Cold Shoe and 1/4"-20 Screw
• EVF Support: Via a 15mm Rod Mount
• Mount Accessories: Via 1/4"-20 Threads and Cold Shoe Receivers
• Sturdy: Aluminum and Steel Construction

- ARCA Quick Release Plate for Sony a7S III -
This Arca-Swiss compatible quick release plate attaches directly to the bottom of the Tiltaing Full and Half Camera Cages for Sony a7S III to allow you to quickly and easily attach and detach from Arca-Swiss support systems.

- Tiltaing Manfrotto Quick Release Plate Type II -
This Manfrotto-compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages for Sigma fp and Black Magic Pocket Cinema Camera 4K/6K to allow you to quickly and easily attach and detach from Manfrotto support systems.

- HDMI to Micro HDMI Adapter -
This cable is for use with the Tilta Camera Cage for Sony a7/a9 Series and Tilta Camera Cage for Sony a6 Series. It adapts the Micro HDMI port in the camera to a female HDMI, allowing for the connection of an external monitor and/or transmitter using a regular HDMI cable.

- USB-C Cable Clamp Attachment for Panasonic S5 -
This USB-C clamp attaches directly to the Tiltaing Full Camera Cage for the Panasonic S5 to allow you to tightly and securely fasten a USB-C cable to your camera setup.

- Advanced Side Handle Run/Stop Cable -
This cable gives you Run Stop capabilities for supported camera systems which allow remote recording control when using the the Tiltaing Advanced Side Handle.

Simply connect the cable from the Advanced Side Handle into your camera's Run Stop port to control the record start/stop with the push of a button.

Features
• Start/Stop Recording: Via the Record Button on the Advanced Side Handles
• Compatible: with RED Komodo, Sony a6/a7/a9, Canon C-Series, and Panasonic GH / S Series
• Universal: LANC Option Supports Many Additional Cameras with LANC Ports
• Custom Designed: For Advanced Side Handles
• Lightweight & Durable: Copper and Steel Construction

- Tiltaing Advanced Left Side Handle Attachment Type VI -
This attachment allows you to adapt any of the Tiltaing Advanced Side Handles to use on half and full Tiltaing Camera Cages for RED Komodo, Sony a7SIII, Panasonic S5 and Panasonic BGH1.

This type of unique NATO Rail connection allows you to slide and lock your handle onto the side panels of your camera cage.

This creates an extremely solid connection that is also quick to remove if needed.

This connection allows you to mount your handle further from your camera body than the Type IV.

Secure And Steady
Offers reliable support. Adds more flexibility for your camera operation.

Quick Assembly. Secure Operation
The attachment supports quick assembly and disassembly.

Helps you achieve high productivity on film sets.

Wide Range Of Compatibility.
Multiple assembly options. More possibilities for your advanced operation needs.

Universal Side Handle Attachment
Provides More Flexibility.

Features
• Adapt: The Tiltaing Advanced Side Handle to Type VI Cages
• Compatible: With Tiltaing Camera Cages for RED Komodo, Sony a7SIII and Panasonic • S5 & BGH1.
• NATO Rail: Connection Makes Mounting your Handle Secure yet Easy to Remove
• Fast & Secure: Design Makes Swapping Attachment Types Quick Without Compromising Security
• Increased Distance: Between Handle and Camera Body Compared to Type IV

- 15mm Bottom Single Rod Holder -
This 15mm Single Rod Holder mounts along the the bottom of Tiltaing half and full camera cages.

It allows you to secure a single 15mm rod on the bottom of your camera for attaching rod based accessories like wireless follow focus motors.

The design of this Rod Holder makes it one of the best lightweight options for attaching a 15mm rod to your system.

This makes it the perfect solution for gimbals and other camera builds where weight is concerned.

Features
• Single Rod: Mounting Perfect for Follow Focus Motors
• 15mm Support: Compatible With Any Sized 15mm Rod
• Lightweight: Solution Perfect for Gimbals and Compact Builds
• Locating Pin: Prevents Unwanted Rotation via an Additional Point of Contact
• Compatible: With Most Tiltaing Full and Half Camera Cages

- 15mm LWS Baseplate Type II -
This 15mm LWS baseplate easily slides onto the base of the Tiltaing half and full camera cages for, Panasonic GH, Fuji XT3/4, Nikon Z6/Z7, Sony a6, and Sony a7/a9.

It provides 15mm LWS rod holders to allow you to attach rod-based accessories and is compatible with Tilta Standard Dovetails or ARRI Standard Dovetails via an adapter.

1/4"-20 Threads on the bottom support almost any Quick Release Plate.

Features
• 15mm Rod Support: Secure 15mm Rods to your System for Various Accessories
• Dovetail Support: Slides and Locks onto Tilta Standard Dovetails
• Universal: Supports Quick Release Plates that Connect via 1/4"-20 Threads
• Custom Designed: For our Panasonic GH, Sony a6, a7/9, Nikon z6/z7 and Fuji XT3/4 Camera Cages
• Lightweight & Durable: Aluminum and Steel Construction

- 15mm Aluminum Rod -
These rods are compatible with 15mm studio and 15mm LWS baseplates and provide a way to mount accessories to your camera rig.