Canon PIXMA Pro 200 Professional 13" Wireless Inkjet Photo Printer - With 2 Pack Canon CLI-65 Cyan Ink Tank

2025-02-16T19:00:00

Used to have a Pro-9000 Mark II for years. I've had my Pro-200 for a few years now. It prints beautifully, but the biggest gripe are the interface (way too finicky, worries too much about non-matched print sizes, requires too much intervention) and the print cartridges. These things dry up over time and are so expensive, you are paying for their replacement way too often and not getting anything out of them.

JPharmDAPh

Originally posted at

2025-01-25T19:00:00

I can't recommend this printer. It's been a source of issues since I got it. I never had that many issues with the previous version, a Pixma 100. Just when I needed to print again this week, Murphy's law, I can't get one usable print from the 200. I've spent many hours to fix, using everything I know about these printers, calibration, profiles, you name it. Nothing. At this point, it's just a piece of plastic junk.

NotHappyBaby

Originally posted at

2024-12-10T19:00:00

Prints beautifully, until it starts screeching and throwing the error code. Canon support no help. All they could say is look for a foreign object inside the printer. There was none. No other advice. Looked in vain online for a repair shop. None exist. Tried to get inside the printer to find the problem. You cannot get inside it even to inspect the rollers, etc., because it is a sealed black plastic box with no way inside. This machine was designed to break as soon as the 1 year warranty expires. If you are going to buy one, get an extended warranty.

tlclittleton

Originally posted at

2024-11-14T16:37:06

Great printer. Great colors,

Akram J.

2024-11-12T19:00:00

This printer has been wonderful for me! I print photos for my customers and they look very professional. I also print my photographs for art shows! It works wonders for me!

MaryLeeMike

Originally posted at

2024-08-29T20:00:00

this printer exceeded my expectations! After learning the Canon Professional Print & layout software, the Pixma Pro 200 is not only affordable but the quality of the prints are nothing more than amazing!

IRich

Originally posted at

2024-07-04T20:00:00

Been having problems this printer ever since I purchased it, multiple different errors popping up from time to time. While these issues were often resolved by turning the printer on and off or with the help of Canon support, the printer has now completely died just four months after the warranty expired. The cost to repair it is enough for me to purchase a new printer. Using this printer for my business has been stressful and anxiety inducing. The ink is frequently out of stock, and who knows when another error message will pop up. Although the print quality was great while it lasted, I recommend buying this printer at your own risk.

seaweedmonster1000

Originally posted at

2024-03-18T20:00:00

I have ordered 2 of these and both of them had issues printing 4x6 photos. I called support on the first printer and was told it was not purchased from Canon so support would not help me. With the issue. Seemed weird but, Ok. What happened to the factory warranty??? So ordered another same printer this time form Canon directly. Second printer had the same issue as the first printing 4x6 photos. Called Canon Support and the tech was able to fix the issue by adjusting the print head. So bottom line, the first printer was fixable but the support tech was not willing to help with a known issue. So now I own 2 printers of the same kind but only needed one. So thanks Canon for poor tech service. The printers have awesome quality better than the Epson we replaced.

M R.

Originally posted at

2024-02-06T05:22:51

Great entry level professional printer! The color is spot on and it was easy to set up. It allows me to print heavier card stock easily which is what I was looking for. My only concern is that it is dye-based ink instead of the regular ink-jet ink but I'm mainly printing stationery. My art prints will have to be under glass and away from sunlight. It was also packaged in a way that I could carry it myself up the stairs to my studio! I was concerned about the weight and size but this Canon is the perfect size to sit on top of my flat files and is smaller and lighter than the Pro-1000 so I'm glad I chose this one!

BETHANY H.

2024-01-18T19:00:00

Pretty much works as advertised, fairly straight forward to setup and use. There are some quirks that may be easy to fix, like having to manual select new paper size if print job mismatches default. But that can be good if you have preloaded something different a couple days ago that you forgot about already. Anyway, it's like having a mini old-style line plotter at home.

scb666

Originally posted at

2024-01-11T19:00:00

I purchased this last summer after my tank printer had given me lots of jammed paper, and bad color. I love this one.

MPhill22

Originally posted at

2023-12-25T10:15:24

This is an amazing printer!! It was a present to myself and I didn't know how much I really needed it. Quality, ease of use and professional results are all in this one printer. Loving it so far and hoping for many years of happy printing ahead!

JOANMARIE H.

2023-11-19T19:00:00

I bought this to add to my Pixma Pro 9000 Mark ii. I am impressed with the developments since the 9000 and am quite happy, delighted, with the performance of the Pixma Pro 200. Prints beautifully on a variety of papers and, really, inspires confidence and satisfaction. Well done, Canon.

Shujej

Originally posted at

2023-09-24T20:00:00

I hate this printer. I owned the Pixma Pro-100 which was a fabulous printer. Excellent color reproduction and easy to use. This printer is awful. Colors are dark and off (I do use ICC profiles for each different paper) and forget about custom sizes! Impossible even with checking the box about margins. If I could find an a Pixma Pro-100, I'd buy it.

sharon95432

Originally posted at

2023-06-23T20:00:00

Been using it for about a year, have yet to be disappointed!

mmdietrich

Originally posted at

2023-06-06T20:00:00

I acquired a replacement printer after Canon acknowledged that my original one was faulty. However, the situation took another disappointing turn when the new printer also failed to function properly. Specifically, whenever I run out of ink and insert a new cartridge, it causes certain colors to stop printing without any discernible pattern. The printer would intermittently work the following day, only to revert to its malfunctioning state again. This frustrating ordeal has resulted in an excessive waste of high-quality paper and ink, as the printed cards end up with incorrect colors. Consequently, I am unable to fulfill wholesale orders, leaving me extremely frustrated with the entire situation. It appears that I ended up with two defective devices, which is disheartening.

Liffey

Originally posted at

2023-05-31T20:00:00

I've been using the Pro-200 for a few months now and in that time I've made about 30 13"x19" photo prints. There was a time that I used to think, "I wish people could see the sharpness and color of my photos like I do on my big UHD monitor" After using this printer, I'm absolutely blown away by the sharpness, clarity and color of the prints. I couldn't believe that they look even better than on the screen in UHD. I absolutely love this printer.

AWilliams

Originally posted at

2023-05-23T20:00:00

I haven't yet had the opportunity to set up the printer but I have never been disappointed with any productsCanon

Lorna

Originally posted at

2023-02-24T19:00:00

The PIXMA Pro-200 gives you great image quality with dye-based ink - the image quality is worth five stars, but... It gobbles inks surprisingly fast and the inks are expensive, and it doesn't recognize the ICC profiles for papers from other manufacturers. It requires you interact with it every time you turn it on and that can be inconvenient if the printer is not in the same room you're in. Those are worth a one-star deduction, but if I needed another Pro-200, I would buy it again.

Timber

Originally posted at

2023-02-15T12:01:59

Beautiful prints 13x19 Cannon pro 200 I have used Adorama for years in the past . Always pleased!

Daniel D.

2023-02-07T13:37:27

Very pleased with this purchase, I've used cannon printers for along time . This pro 200 seems to use less ink than previous models,very easy to setup. Although trying to get updated drivers from cannons website is horrible. Beautiful looking prints .

Daniel D.

2022-12-16T19:00:00

I've had this printer now for......over 2 years. Basically got it when it first came out! I love it, once you make the settings the way they should (Let the ink dry after each print if you are printing art prints or photos etc) it works like a charm. I love this printer so much, I am not sure why others are having issues. The quality is phenomenal and it's been a life saver <3

Eyesofashes

Originally posted at

2022-12-06T19:00:00

I've had my Pixma Pro 200 for a month. I was reluctant in the purchase of this printer. Simply because All the reviews I read were so good. I could not believe a printer could be this good. It has exceeded my expectations. Great colors and what you see on the computer monitor is what I am getting on my color prints. I totally recommend this printer if you print lots of color photos. The Print and Layout software is a little difficult to use. I use another software to edit my color photos.

Rub

Originally posted at

2022-12-03T19:00:00

I have had this printer for over a year and a half I am still hoping I will grow fond of it but unfortunately that is not the case. I have had the canon pixma pros for the past twenty years and every time they update it to a new model it gets worst. This model is very inconsistent, when it prints it is great but it seems to have a mind of its own. I use it in my stationery store for stationery, invitations etc.. and if it wasn't so expensive I would replace it. Just now I am printing foldover notes and half of them printed fine and all of a sudden it detects paper size incompatibility and stops printing. All I get is a blank paper. Maybe if all you print is 8.5x11 the printer may be fine but if you like to print custom sizes you may want to consider another printer. Usually I am fond of Canon but this pixma pro 200 has been very disppointing

note y.

Originally posted at

2022-11-25T19:00:00

I am a committed Canon user. My new purchase is sitting here on my desk not working. I do not mean to embarrasses Canon. But the Pro 200 out of a PIXMA PRO 200 BOX Serial Number: AGLJ06410. This is one of many printers I have owned over the years. The instruction in the box were for an outdated model Pro 10/Pro 100. The printer was in the original packaging and never open before I purchased it. No, I have not contacted Canon Tech Support. This is not the fault of the well respected retailer I purchased this and most of my Canon gear from. I bought this printer to replace my Pro 9000 Mark II after I wore it out! There is really no excuse for this to happen. Any number of things could happen to cause this starting with QC! I am a Canon user since the days of Minolta. My change to digital happen in 2008. I am usually excited when I buy gear. Let see how long it takes Canon to follow up on this review. Now I am off to chat with a Virtual Canon Customer Service AI BOT.

Professor j.

Originally posted at

2022-11-25T19:00:00

I sent in a review this even Friday 11/25/2022 about a manual that seemed to be for the Pro10/100. I fixed the printer head and aligned the printer head successfully.. Then I set up the wifi no problem. I updated the firmware. All this was done through the screen on the printer. Canon has been good to me so my initial review was not something I wanted to do.

Professor j.

Originally posted at

2022-09-16T09:06:05

I am an equine event photographer, and needed a printer to deliver prints onsite to contestants. This printer fits the bill! Beautiful images, small enough to be "portable" from event to event and fairly reliable. I do wish it would print a bit faster at times when there is a big rush at our booth, but am overall very happy with the performance of this printer. In fact, happy enough I now have 2 of them to split the printing duties and do a better job of keeping up with a demanding print load.

Carla L.

2022-06-24T11:16:27

Had to wait for it but best color printer for the price.Love the colors an software.

RODNEY L.

2022-06-16T12:10:55

Produces great color and easy to set up.

GERALD W.

2022-06-15T01:11:41

Printer is quite large. Came well packed with easy to follow instructions to set up. I wanted something to print my own amateur photos & this didn?t disappoint. Beautiful color. Looks professional. Very happy.

MIKE B.