Ikan Lyra LBX16-POE and LBX8-POE Low Profile Bi-Color Studio Soft LED Light Panel Kit

- LBX16-POE Bi-Color Studio Panel Soft LED Light -
The Ikan Panoramic Low Profile PoE Light is an extended soft panel LED designed for broadcast studios, podcast studios, conference rooms, classrooms, and any space where low ceiling clearance demands wider coverage without sacrificing light quality. Powered and DMX controlled through a single ethernet (RJ45) cable via PoE++, it installs cleanly into existing network infrastructure and integrates natively with ArtNet, sACN, and Q-SYS ecosystems via the Q-SYS Designer Plugin.

At 85W with high CRI LEDs and a 110-degree beam angle, the Panoramic Low Profile PoE Light produces a soft, wraparound light across a large area with minimal harsh shadows. Color temperature adjusts from 2700K to 6500K to suit any production environment. The sturdy yoke with tension knobs allows precise positioning at any angle, while the rear control knob and LED readout make it easy to dial in brightness, color temperature, and DMX channels on the fly. Built-in accessory clips on the four corners of the fixture frame support mounting of standard light modifiers, such as barndoors and egg crates (barndoors and egg crates sold separately) and the baby 5/8" and junior 1 1/8" combo pin ensures compatibility with standard light stands. (Patented)

Power Over Ethernet PoE++
The LBX16-POE is powered using a single Ethernet cable (Cat6 RJ45 24AWG or better). This eliminates the necessity for additional wiring or power outlets, saving both time and reducing installation costs on obtaining permits or hiring electricians to install new ceiling outlets. The LBX16-POE supports IEEE 802.3bt Type 4 PoE++, ensuring efficient power delivery over the network.

Note: IEEE 802.3bt Type 4 switch is required.

ArtNet and sACN Compatibility
The LBX16-POE supports both ArtNet and sACN, two of the most widely used DMX over IP protocols, making it equally at home in broadcast facilities and corporate studio environments. By transmitting lighting control over standard ethernet infrastructure, it fits naturally into existing network setups without dedicated DMX cabling. That means easier installation, longer runs, and the ability to manage multiple fixtures from a single connection. And with PoE, power and control arrive through one RJ45 cable, keeping installations tidy and setup time short.

Q-SYS Designer Plugin Integration
Easily integrate Ikan Lyra PoE Lights into your Q-SYS ecosystem with the Q-SYS plugin, available in the Q-SYS Designer Asset Manager. This plugin allows users to control light intensity and color temperature for up to 256 lights per universe directly within Q-SYS Designer. Designed for streamlined workflows in spaces like conference rooms, the plugin eliminates the need for specialized lighting knowledge. With the press of a button, all lights can be set to optimal, pre-configured settings, ensuring a seamless and user-friendly experience for any environment.

Web GUI
Utilize the web GUI to modify ArtNet & sACN settings, including DMX addresses and universes, as well as access configured IP address settings.

Low Profile
Designed specifically for spaces with limited ceiling clearance, the Panoramic Low Profile PoE Light delivers broad, even coverage without requiring the overhead real estate of traditional panel lights. A baby 5/8" and junior 1 1/8" combo pin gives you the flexibility to mount it on a grid or position it on a standard light stand, fitting naturally into the setups you already have.

Consistent Color and Brightness
The Panoramic Low Profile PoE Light combines high CRI LED chips with a 1/2-stop soft diffusion panel to produce smooth, even light with accurate color rendition. Bi-color adjustability from 2700K to 6500K makes it easy to match any environment or production need, while the 110-degree beam angle ensures broad, consistent coverage across the whole space.

Full Body Lighting
Mount it horizontally for wide area coverage, or flip it vertical with the included TVMP combo pin adapter for full body lighting. One light, two orientations - adaptable to however your space or shoot demands it.

110 Degree Beam Angle & Single Shadow
The 110-degree beam angle delivers broad, soft illumination across a wide area, producing a single, natural-looking shadow that keeps your shot clean and artifact-free.


- LBX8-POE Low Profile Bi-Color Studio Panel Soft LED Light -
The Ikan LBX8-POE is a cutting-edge and compact soft panel LED light that is designed specifically for broadcast studios, conference rooms, podcast studios, classrooms and various spaces with low ceiling clearance. Engineered for easy installation, this light is simultaneously powered (via PoE++) and DMX controlled (via ArtNet or sACN) through a single Ethernet (RJ45) cable. For seamless integration into Q-SYS ecosystems, the LBX10-POE is compatible with the Q-SYS Designer Plugin, offering enhanced control and efficiency alongside ArtNet and sACN protocols. Boasting high CRI LED chips and a soft panel, the LBX8-POE emits a gentle, wraparound light, crafting artifact-free shadows. Its color temperature range, from 3200K to 5600K, adapts seamlessly to various lighting productions.

With a broad 110-degree beam angle, coverage is extensive, and the sturdy yoke, featuring tension knobs, ensures effortless adjustments and secure placement at any angle. The intuitive yellow control knob on the back, paired with the LED readout, simplifies fine-tuning of brightness, color temperature, and DMX channels. Enhance your creative toolkit with built-in barn doors featuring integrated clips for easy addition of light modifiers. The LBX8-POE's compatibility extends with a baby 5/8" and junior 1 1/8" combo pin, allowing versatile use on standard light stands. Elevate your studio lighting experience with the Ikan LBX8-POE. (Patent Pending)

Power Over Ethernet PoE++
The LBX8-POE is powered using a single Ethernet cable (Cat6 RJ45 24AWG or better). This eliminates the necessity for additional wiring or power outlets, saving both time and reducing installation costs on obtaining permits or hiring electricians to install new ceiling outlets. The LBX8-POE supports IEEE 802.3bt Type 4 PoE++, ensuring efficient power delivery over the network.

Note: IEEE 802.3bt Type 4 switch is required.

ArtNet and sACN Compatibility
The LBX8-POE supports both ArtNet and sACN DMX protocols. A single RJ45 cable can be used for both power and DMX. This versatility empowers users to integrate the light seamlessly into their preferred DMX control systems.

Q-SYS Designer Plugin Integration
Easily integrate Ikan Lyra PoE Lights into your Q-SYS ecosystem with the Q-SYS plugin, available in the Q-SYS Designer Asset Manager. This plugin allows users to control light intensity and color temperature for up to 256 lights per universe directly within Q-SYS Designer. Designed for streamlined workflows in spaces like conference rooms, the plugin eliminates the need for specialized lighting knowledge. With the press of a button, all lights can be set to optimal, pre-configured settings, ensuring a seamless and user-friendly experience for any environment.

Web GUI
Utilize the web GUI to modify ArtNet & sACN settings, including DMX addresses and universes, as well as access configured IP address settings.

Low Profile
The Ikan LBX8-POE is crafted with versatility and practicality in mind, specifically for spaces with limited ceiling clearance. To accommodate a variety of lighting setups, the LBX8 is equipped with a convenient baby 5/8" and junior 1 1/8" combo pin, enabling it to be mounted on a grid or securely positioned on a light stand.

Consistent Color and Brightness
The Ikan LBX8-POE boasts high CRI LED chips and a 1/2-stop soft diffusion panel, which together produce a brilliant and diffused light. Its bi-color adjustability, ranging from 3200K to 5600K, makes it suitable for a wide range of lighting scenarios. The wide beam angle of the Lyra soft light radiates a generous amount of soft illumination, providing ample coverage.

Full Body Lighting
Using the included TVMP combo pin adapter, you can mount the light vertically to allow full body lighting.

110 Degree Beam Angle & Single Shadow
The wide 110 Degree beam angle gives you plenty of soft light and a more natural shot with a single shadow.