
This item is no longer available.
Review Summary
Beeper, can be enabled/disabled through software
Insteon. Versions prior to 3.6 also support X10.
Yes. Versions prior to 3.6 do not support load sense.
Yes
Non-volatile EEPROM
Red/Green LED
0x01 dimmable lighting control
0x37
1
400
Yes
10 mV
3.2 Vpp into 5Ohms
Yes
131.65 KHz
Yes
1
400
Yes
Yes
Yes
915.0 MHz
150' / 45.72m
Supported as Controller:
On
Fast-On
Begin Brighten
End Brighten
Off
Fast-Off
Begin Dim
End Dim
Supported as Responder:
On
Fast-On
Begin Brighten
End Brighten
Beep
Off
Fast-Off
Begin Dim
End Dim
Yes
Leading-edge TRIAC dimmer
UV stabilized plastic
Ungrounded, polarized electrical outlet, NEMA 1-15
Indoors
0-85% relative humidity, non-condensing
32 to 104 deg. F / 0 to 40 deg. C
Yes
-4 to 158 deg. F / -20 to 70 deg. C
Yes, ungrounded polarized. NEMA 1-15 type
No
Plug-in incandescent lighting sources
300W
5W
No
<0.75W
120 Volts AC +/- 10%, 60 Hertz, single phase
Surges over 1,000 volts
X10 Support: No. Versions prior to 3.6
3.2 x 2.05 x 1.05" / 81.28 x 52.07 x 26.67mm
3.3oz / 93.55g
813922010183
Insteon Plug-In Devices
Add some smarts to your plug-in lamps and appliances
Dimming
Lamps Only
Up to 300W
2-Prong Ungrounded Plug
NEMA 1-15
120VAC, 60Hz
Indoor-only
Dual-Band
Plug-in Control
Even if every room in your home is lit with recessed lights, chandeliers and wall sconces, chances are, you still have a table lamp or two. And that's nothing to say for all of the plug-in appliances throughout your home. Insteon Plug-in Modules let you add remote control of all of these "less sophisticated" plug-in apparati.
Remote Control
While their plug-in modules do feature embedded on and off buttons, you don't really want to reach behind the couch to turn on a lamp. Thanks to Insteon, you can control your connected lamps and appliances from any wall switch, keypad, sensor - or even your smartphone when used with the Insteon Hub.
Sensor Integration
You might not have thought about it, but a good deal of your plug-in appliances become quite handy when automated. Automatically control table lamps with amotion sensor, turn on a box fan when a room gets too hot, even sound a siren when a leak is detected.
On/Off or Dimming
No matter what you want to control, there is an Insteon Plug-in Module for your needs. Dimming, On/Off and Outdoor On/Off modules are available to control everything from lava lamps in your parlor to holiday decorations in freezing rain.
Plug-in In-Line Control
Setup of your Insteon Plug-in device couldn't be easier. All you have to do is connect your lamp or appliance's power cord to the outlet on the bottom of the Insteon module and then connect the Insteon module to a regular unswitched power outlet.
Buttons When You Need Them
If you need to turn your connected device on or off when your remote controls aren't handy, you can just tap the up or down arrows on the side. Chances are, you'll find your Insteon Wall Switch or Smartphone a better remote control, though.
Ruggedized for Outdoor Duty
Outdoor On/Off Module is equipped with a special, weather-resistant enclosure for all-year control but using it is no different. Just connect your fountain, landscape lights or other outdoor apparatus and you're off.
BYO-PILOA
Bring Your Own Plug-In Lamp Or Appliance
Home control doesn't need to conflict with your decor; sophisticated or contemporary, elegant or wacky, Insteon Plug-In modules let you bring any plug-in lamp or appliance to the home automation party. It doesn't matter if you want to use Grandma's generations-old Tiffany lamp or a brand new, mass-produced objet d'art, if it has a power cord, Insteon Plug-in modules give you the power of remote control.
Custom On-Level
Not every room needs to be bright all the time. With Dimmer Module, a customizable On-Level lets you pick how bright your lamp is when you turn it on. Set the brightness to be anywhere from 1- to 100%.
Programmable Ramp Rate
The days of being startled by instantaneous bright light are gone. Ramp Rates with Dimmer Module let you specify how quickly or slowly a lamp turns on. Slowly brighten from off to on over the course of 0.1 seconds to 8 minutes.
Complete Scene Support
Control multiple lights or appliances from a single button with Scenes. With Dimmer Module, scenes let you gracefully fade lights in and out, combining the benefits of both preset On-Levels and Ramp Rates. On/Off Module and Outdoor On/Off Module can be configured to turn on or off when used in a scene.
Smartphone remote control
Add the Insteon Hub to the mix and you can control your Plug-in devices from your smartphone or tablet. And then some.
Scenes
Next time the in-laws visit, wow them with your automation skills by creating scenes for dining, entertaining - even a special "midnight snack" button that illuminates just the lights they will need to find the kitchen after dark.
Schedules
One-up the Jones this year when you put out your holiday decorations. With Insteon, all of your outdoor lights will turn on at sunset in perfect unison - that means you can look professional while still going overboard.
Configure
You can always configure On-Level and Ramp Rate using the set button on your device, but it's so much better when you add a smartphone to help manage all of the hidden features your devices include.
Control on Apple Watch
Control lamps and appliances from your wrist with the Insteon App on Apple Watch. Turn On/Off Module and Outdoor On/Off Module on and off. And with just a tap, set the brightness of a Dimmer Module to any one of four presets.
Remote control from another Insteon device
Let convenience be your mantra and use the power of Insteon to automate home. Whether it's as simple as using a Wireless Switch to turn on your space heater or as elaborate as sensor-triggered automatic activation, Insteon is your tool.