Jim Dunlop DB01 Dime Bag Signature Cry Baby Wah Guitar Effects Pedal

SKU: JDDB01U

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Jim Dunlop DB01 Dime Bag Signature Cry Baby Wah Guitar Effects Pedal Specifications

  • Impedance: Input

    1 MOhms

  • Impedance: Output

    <1 kOhms

  • Noise Floor

    -102 dBV

  • Filter Center Frequency

    Heel Down: 440 Hz
    Toe Down: 1.5 kHz to 2.2 kHz

    Heel Down: 400 Hz
    Toe Down: 1.3 kHz to 1.9 kHz

    Heel Down: 375 Hz
    Toe Down: 1.2 kHz to 1.8 kHz

    Heel Down: 345 Hz
    Toe Down: 1.0 kHz to 1.6 kHz

    Heel Down: 295 Hz
    Toe Down: 750 Hz to 1.4 kHz

    Heel Down: 250 Hz
    Toe Down: 1.2 kHz

  • Max Gain

    15 dB at Filter Center Frequency

  • Boost Range

    0.1 to 17 dB

  • Bypass

    Buffered

  • Current Draw

    2.5 mA

  • Power Supply

    9 volts DC

About Jim Dunlop DB01

This might just be the most flexible, powerful wah pedal ever. Designed in conjunction with legendary guitarist Dimebag Darrell, the Dimebag Cry Baby From Hell Wah features an extended sweep range with a fine tune knob, 6-way range selector, kick-in volume boost and LED indicators (Wah on/off, Boost on/off) at the back of the pedal. This hot-rodded pedal gives you everything you need to do serious wah damage.

Power
The Dime Bag Signature Cry Baby Wah is powered by one 9-volt battery (accessed via bottom of pedal), an AC adapter such as the Dunlop ECB003/ ECB003E or a DC Brick power supply.

Controls
• VOLUME knob controls amount of gain added by BOOST switch
• VARIABLE Q knob controls the sharpness of the DB01's bandpass
• FINE TUNE knob shapes tone of toe-down position
• BOOST switch increases output as set by the VOLUME knob (indicated by red LED)
• FOOTSWITCH toggles effect on/bypass (green LED indicates on)

Adjustable Rocker Tension
Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance the rocker has to being moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance. (Wrench included).

Switchable Output Jacks
The DB01's OUTPUT/INPUT jack works in either Parallel Mode or Pass Through Mode using the internal JP2 switch. In the default Parallel Mode (JP2 switch UP), both the OUTPUT and OUTPUT/INPUT jacks function as parallel outputs, each receiving your affected signal. This mode is useful for splitting the DB01's signal to two separate effects chains. In Pass Through Mode (JP2 switch DOWN), only the OUTPUT jack receives the affected signal, while the OUTPUT/INPUT jack receives your clean, unaffected signal. This is useful for sending your dry signal to a tuner outside of your effects chain.

What's in the box:

  • Jim Dunlop DB01 Dime Bag Signature Cry Baby Wah Guitar Effects Pedal
  • Wrench
  • Jim Dunlop Warranty